IllustrationTL* THE CONTACT OWNS A 2007 NISSAN MAXIMA. WHILE DRIVING APPROXIMATELY 30 MPH, THE AIR BAG WARNING LIGHT ILLUMINATED CONTINUOUSLY. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS NOT NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS UNAVAILABLE.
2007 Nissan Maxima
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2007 Nissan Maxima do not stand out strongly from the model-year median of 99.
About this comparison →How this year compares
Owner complaints by model year
Compare all Maxima years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
100–25K
925–50K
2350–75K
2475–100K
31100–150K
8150K+
105 reports with mileage · 24 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Structure. Review the 33 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Air Bags. Review the 18 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 18 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
4 crash reports1 fire reports3 injury reports
What owners actually said
129 reportsWHEN I BROUGHT MY CAR TO THE MECHANIC TO FIX THE BRAKES, HE DID NOTICE THAT THE FLOOR PANEL HAD A HUGE HOLE DUE RUST. THIS WAS IN THE DRIVER AND PASSENGER'S SIDE. HIS COMMENT WAS: "THE AMOUNT OF RUST ON THE FLOOR PANEL IS SUCH THAT IT COULD HAVE AN IMPACT IN THE SAFETY OF THE VEHICLE. THIS IS A SAFETY ISSUE DUE THE FACT THA…
Read full complaint
WHEN I BROUGHT MY CAR TO THE MECHANIC TO FIX THE BRAKES, HE DID NOTICE THAT THE FLOOR PANEL HAD A HUGE HOLE DUE RUST. THIS WAS IN THE DRIVER AND PASSENGER'S SIDE. HIS COMMENT WAS: "THE AMOUNT OF RUST ON THE FLOOR PANEL IS SUCH THAT IT COULD HAVE AN IMPACT IN THE SAFETY OF THE VEHICLE. THIS IS A SAFETY ISSUE DUE THE FACT THAT THE RUST HAS COMPROMISED THE STRUCTURE OF THE VEHICLE." THE MECHANIC AND MYSELF CAME TO THE CONCLUSION THAT THE RUST IS BECAUSE OF THE POOR QUALITY OF THE METAL PART ON THE METAL PANEL. A 7 YEAR OLD CAR SHOULDN'T HAVE THIS KIND OF PROBLEM. I DROVE A NISSAN MAXIMA ALL THE WAY TO 250,000 MILES AND THE FLOOR PANEL DIDN'T SHOW ANY SIGN OF RUST. WHAT IS THE PROPER STEPS I MUST TAKE SO TO REQUEST FROM NISSAN MAXIMA TO COVER THE REPAIR? SHOULD THIS CAR'S CONDITION HAVE A RECALL MANDATE FROM THE NHTSA? YOUR HELP WITH THIS MATTER WILL BE APPRECIATED. *TR
FLOOR PANS UNDER BOTH THE DRIVERS AND FRONT PASSENGER SEAT ARE COMPLETELY RUSTED OUT. *TR
THE AIRBAG SENSOR FOR THE FRONT PASSENGER IS FAULTY IN MY 2007 NISSAN MAXIMA. THE LIGHT IS ALWAYS FLASHING IN THE DASH BOARD. I NOTICED NISSAN HAD THIS PROBLEM ON OTHER VEHICLES, BUT MY MAXIMA WAS NOT LISTED IN THE RECALL. *TR
BOTH THE DRIVER'S SIDE AND FRONT PASSENGER SIDE AIRBAGS FAILED AT THE SAME TIME. WHILE THERE WAS A RECALL ON MANY 2007-2008 NISSAN MODELS DUE TO AIRBAG ISSUES, THE MAXIMA WAS NOT INCLUDED. THE FACT THAT BOTH FAILED AT THE SAME TIME SHOULD POINT TO A MANUFACTURER DEFECT/FAILURE. *TR
I WAS AT A NISSAN DEALERSHIP GETTING A NEW INTELLI-KEY MADE FOR THE CAR WHEN THE STEERING WHEEL LOCK BROKE. I FOUND OUT THIS WOULD BE THE THIRD TIME THIS LOCKING MECHANISM HAS BEEN REPLACED ON THIS CAR ALONE. THE TECHNICIAN TURNED THE STEERING WHEEL TO THE RIGHT AND THE LOCK BROKE AND LOCKED INTO PLACE. HOW MANY TIMES DOES …
Read full complaint
I WAS AT A NISSAN DEALERSHIP GETTING A NEW INTELLI-KEY MADE FOR THE CAR WHEN THE STEERING WHEEL LOCK BROKE. I FOUND OUT THIS WOULD BE THE THIRD TIME THIS LOCKING MECHANISM HAS BEEN REPLACED ON THIS CAR ALONE. THE TECHNICIAN TURNED THE STEERING WHEEL TO THE RIGHT AND THE LOCK BROKE AND LOCKED INTO PLACE. HOW MANY TIMES DOES THE SAME PART HAVE TO BREAK ON A NISSAN BEFORE YOU CONSIDER IT TO BE A BAD PART? THE STEERING LOCK WAS RECALLED BEFORE IT LEFT THE FACTORY, REPLACED 2 TIMES OVER THE NEXT 7 YEARS. THE STEERING LOCK IS NOT A PART THAT FAILS BECAUSE IT IS REPEATEDLY USED OR BECAUSE OF TOO MANY MILES, IT IS CAUSED BY A POOR QUALITY PART! ONCE AGAIN THIS IS THE 3RD TIME THIS PART HAS BEEN REPLACED ON THIS VEHICLE, I HAVE HAD 18 CARS OVER THE LAST 30 YEARS AND I HAVE NEVER HAD A STEERING LOCK FAIL. *TR
I TOOK MY CAR IN TO MY MECHANIC AT CITY AUTO REPAIR TO BALANCE MY TIRES AND MY MECHANIC FOUND THAT UNDERNEATH MY CAR ON MY DRIVER'S SIDE IS RUSTING OUT AND HAS A HOLE IN IT. THERE IS APPARENTLY WATER COMING IN THE CAR FROM SOMEWHERE AND RUSTING OUT THE FLOOR PAN ON THE DRIVER'S SIDE OF THE CAR. I GOOGLED THIS PROBLEM AND THERE…
Read full complaint
I TOOK MY CAR IN TO MY MECHANIC AT CITY AUTO REPAIR TO BALANCE MY TIRES AND MY MECHANIC FOUND THAT UNDERNEATH MY CAR ON MY DRIVER'S SIDE IS RUSTING OUT AND HAS A HOLE IN IT. THERE IS APPARENTLY WATER COMING IN THE CAR FROM SOMEWHERE AND RUSTING OUT THE FLOOR PAN ON THE DRIVER'S SIDE OF THE CAR. I GOOGLED THIS PROBLEM AND THERE ARE MANY COMPLAINTS ABOUT THIS PROBLEM WITH MAXIMA'S AND ALTIMA'S. NISSAN JUST DID A RECALL FOR THIS EXACT PROBLEM, BUT ONLY RECALLED SUV'S. IT'S A FIRE HAZARD BECAUSE THE ELECTRICAL HARNESS CAN SHORT OUT AND CAUSE A FIRE. I WOULD ASK THAT ANY AND ALL NISSAN CARS (NOT JUST SUV'S) BE RECALLED FOR THIS PROBLEM. I ALSO CONTACTED NISSAN ABOUT THIS PROBLEM AND THEY REFUSED TO TAKE RESPONSIBILITY FOR THIS PROBLEM AND REFUSED TO PAY FOR REPAIR OF THE PROBLEM. *TR
I WAS CHANGING THE OIL ON MY MAXIMA AND NOTICED BOTH DRIVERS AND PASSENGERS FLOOR BOARDS ALMOST TOTALLY RUSTED THROUGH. THIS IS A VERY DANGEROUS DUE TO SAFETY OF BOTH DRIVER AND PASSENGERS. AFTER LOOKING THROUGH THE COMPLAINT SECTION OF THIS WEBSITE IT SEEMS TO BE A VERY COMMON PROBLEM THAT NISSAN SHOULD NEED TO RECALL. *TR
THE DRIVER SIDE FLOORBOARD HAS BEGAN TO RUST THRU AS A RESULT OF A HOLE LEFT DURING MANUFACTURING. THIS SEEMS TO BE A DEFECT (SINCE IT IS NOT ON THE PASSENGER SIDE). AS A RESULT OF THE HOLE WATER AND SALT HAVE BEGAN TO RUST THROUGH THE DRIVER SIDE FLOORBOARD. MY VEHICLE WAS TAKEN TO A DEALER WHOM TOOK PICTURES AND SENT TO NISS…
Read full complaint
THE DRIVER SIDE FLOORBOARD HAS BEGAN TO RUST THRU AS A RESULT OF A HOLE LEFT DURING MANUFACTURING. THIS SEEMS TO BE A DEFECT (SINCE IT IS NOT ON THE PASSENGER SIDE). AS A RESULT OF THE HOLE WATER AND SALT HAVE BEGAN TO RUST THROUGH THE DRIVER SIDE FLOORBOARD. MY VEHICLE WAS TAKEN TO A DEALER WHOM TOOK PICTURES AND SENT TO NISSAN. NISSAN'S RESPONSE WAS THE VEHICLE IS OUT OF WARRANTY AND IT IS A RESULT OF BEING IN AN AREA HAT USES SALT DURING WINTER. FORTUNATELY IT LOOKS LIKE THE RUST WAS DETECTED BEFORE IT REACHED THE DRIVER SIDE SEAT WHICH WOULD CAUSE A SAFETY ISSUE (ESPECIALLY DURING AN ACCIDENT). ONE DOES NOT EXPECT A FLOORBOARD TO RUST THRU ON A SEVEN YEAR OLD VEHICLE WITH LOW MILEAGE. *TR
2007 NISSAN MAXIMA. CONSUMER WANTED TO KNOW IF HIS VEHICLE HAS FAULTY AIR BAGS. *TA
Official recalls
106V402000 · Steering:column LOCKING:ANTI-THEFT Device
Oct 23, 2006
CERTAIN PASSENGER VEHICLES EQUIPPED WITH AN 'INTELLIGENT KEY' FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 114, "THEFT PROTECTION." DURING AN INSPECTION OF SOME VEHICLES AT THE ASSEMBLY PLANT, IT WAS FOUND THAT THE STEERING WHEEL WAS LOCKED WITH THE IGNITION KNOB IN THE "OFF" POSITION BUT THE VEHICLE TRANSMISSION NOT BEING IN THE "PARK" POSITION.
Consequence & remedy
Consequence: IF THE KEY IS TURNED TO THE "OFF" POSITION WITHOUT THE TRANSMISSION BEING IN THE "PARK" POSITION, IT IS POSSIBLE THAT THE STEERING WHEEL CAN LOCK WHEN TURNED TO THE RIGHT.
Remedy: DEALERS WILL INSPECT AND REPLACE THE STEERING WHEEL LOCK ASSEMBLY FREE OF CHARGE. THE RECALL BEGAN ON DECEMBER 18, 2006. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE08045 · Transmission Hose Leak
Opened Jul 23, 2008 · Closed Oct 24, 2008
Status: closed (inferred from source dates) · Power Train:automatic Transmission; Power Train:automatic Transmission:cooling Unit And Lines
THIS PE WAS OPENED FOR MODEL YEAR (MY) 2008 NISSAN MAXIMA VEHICLES BASED ON EARLY WARNING DATA THAT THE AUTOMATIC TRANSMISSION COOLER HOSE MAY HAVE PINHOLES AND/OR CRACKS RESULTING IN A TRANSMISSION FLUID LEAK.THE LEAKED FLUID CAN CONTACT THE EXHAUST SYSTEM AND IGNITE.NISSAN HAS SHOWN THAT THE ROOT CAUSE OF THE PINHOLES AND/OR CRACKS IN THE HOSE IS EXCESSIVE STRESS DURING THE MANUFACTURE FORMING PROCESS RESULTING IN HOSE DEFORMATION AT LOADING ONTO A MANDREL, OR DAMAGE DURING UN-LOADING.REGARDING LOADING STRESS, NISSAN STATES, WHEN EXCESSIVE STRESS IS APPLIED WHILE LOADING THE HOSE ONTO THE MANDREL, HOSE DEFORMATION (WHICH LOOKS LIKE A BULGE) CAN OCCUR AROUND THE BENDING AREA.A CRACK WILL START TO FORM ON THE INSIDE OF THE HOSE AT THE AREA OF DEFORMATION.REGARDING UNLOADING STRESS, NISSAN STATES, AFTER THE CURING PROCESS, IN SOME INSTANCES THE HOSE STUCK TO THE MANDREL TIGHTLY AND THE OPERATOR HAD TO APPLY A SIGNIFICANT AMOUNT OF FORCE TO PULL THE HOSE FROM THE MANDREL.IF THIS OPERATION WAS PERFORMED ROUGHLY, THE INTERIOR OF THE HOSE COULD BE DAMAGED BY THE MANDREL EDGE. NISSAN ALSO STATES, BECAUSE OF THE WAY THE HOSES RECEIVED INTERNAL DAMAGE, A DAMAGED HOSE WAS PRODUCED AS A RARE, RANDOM EVENT RATHER THAN SYSTEMATICALLY.THE TRANSMISSION HOSE SUPPLIER, COOPER STANDARD AUTOMOTIVE, IMPLEMENTED PROCESS IMPROVEMENTS THAT LIMIT EXCESSIVE STRESS ON THE HOSE DURING MANUFACTURE. NISSAN HAS SHOWN THAT THIS TRANSMISSION COOLER HOSE WAS ASSEMBLED ON MY 2007 AND MY 2008 MAXIMA VEHICLES.NISSAN REDESIGNED THE TRANSMISSION COOLER HOSE ON MY 2009 MAXIMA, AND THE HOSE IS MANUFACTURED BY A NEW SUPPLIER.NISSAN HAS ALSO SHOWN THAT THE LEAKS MOSTLY OCCUR WITHIN THE FIRST 2000 MILES OF SERVICE WITH A SEVERE DROP IN INCIDENTS BEYOND 2000 MILES OF SERVICE.MOST LEAKS HAVE ALREADY OCCURRED, AND THE ONE FIRE WAS MINOR. A SAFETY-RELATED DEFECT HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.ACCORDINGLY THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.
Additional source detail variants (2)
Power Train:automatic Transmission:cooling Unit And Lines
THIS PE WAS OPENED FOR MODEL YEAR (MY) 2008 NISSAN MAXIMA VEHICLES BASED ON EARLY WARNING DATA THAT THE AUTOMATIC TRANSMISSION COOLER HOSE MAY HAVE PINHOLES AND/OR CRACKS RESULTING IN A TRANSMISSION FLUID LEAK.THE LEAKED FLUID CAN CONTACT THE EXHAUST SYSTEM AND IGNITE.NISSAN HAS SHOWN THAT THE ROOT CAUSE OF THE PINHOLES AND/OR CRACKS IN THE HOSE IS EXCESSIVE STRESS DURING THE MANUFACTURE FORMING PROCESS RESULTING IN HOSE DEFORMATION AT LOADING ONTO A MANDREL, OR DAMAGE DURING UN-LOADING.REGARDING LOADING STRESS, NISSAN STATES, WHEN EXCESSIVE STRESS IS APPLIED WHILE LOADING THE HOSE ONTO THE MANDREL, HOSE DEFORMATION (WHICH LOOKS LIKE A BULGE) CAN OCCUR AROUND THE BENDING AREA.A CRACK WILL START TO FORM ON THE INSIDE OF THE HOSE AT THE AREA OF DEFORMATION.REGARDING UNLOADING STRESS, NISSAN STATES, AFTER THE CURING PROCESS, IN SOME INSTANCES THE HOSE STUCK TO THE MANDREL TIGHTLY AND THE OPERATOR HAD TO APPLY A SIGNIFICANT AMOUNT OF FORCE TO PULL THE HOSE FROM THE MANDREL.IF THIS OPERATION WAS PERFORMED ROUGHLY, THE INTERIOR OF THE HOSE COULD BE DAMAGED BY THE MANDREL EDGE. NISSAN ALSO STATES, BECAUSE OF THE WAY THE HOSES RECEIVED INTERNAL DAMAGE, A DAMAGED HOSE WAS PRODUCED AS A RARE, RANDOM EVENT RATHER THAN SYSTEMATICALLY.THE TRANSMISSION HOSE SUPPLIER, COOPER STANDARD AUTOMOTIVE, IMPLEMENTED PROCESS IMPROVEMENTS THAT LIMIT EXCESSIVE STRESS ON THE HOSE DURING MANUFACTURE. NISSAN HAS SHOWN THAT THIS TRANSMISSION COOLER HOSE WAS ASSEMBLED ON MY 2007 AND MY 2008 MAXIMA VEHICLES.NISSAN REDESIGNED THE TRANSMISSION COOLER HOSE ON MY 2009 MAXIMA, AND THE HOSE IS MANUFACTURED BY A NEW SUPPLIER.NISSAN HAS ALSO SHOWN THAT THE LEAKS MOSTLY OCCUR WITHIN THE FIRST 2000 MILES OF SERVICE WITH A SEVERE DROP IN INCIDENTS BEYOND 2000 MILES OF SERVICE.MOST LEAKS HAVE ALREADY OCCURRED, AND THE ONE FIRE WAS MINOR. A SAFETY-RELATED DEFECT HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.ACCORDINGLY THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.
Power Train:automatic Transmission
THIS PE WAS OPENED FOR MODEL YEAR (MY) 2008 NISSAN MAXIMA VEHICLES BASED ON EARLY WARNING DATA THAT THE AUTOMATIC TRANSMISSION COOLER HOSE MAY HAVE PINHOLES AND/OR CRACKS RESULTING IN A TRANSMISSION FLUID LEAK.THE LEAKED FLUID CAN CONTACT THE EXHAUST SYSTEM AND IGNITE.NISSAN HAS SHOWN THAT THE ROOT CAUSE OF THE PINHOLES AND/OR CRACKS IN THE HOSE IS EXCESSIVE STRESS DURING THE MANUFACTURE FORMING PROCESS RESULTING IN HOSE DEFORMATION AT LOADING ONTO A MANDREL, OR DAMAGE DURING UN-LOADING.REGARDING LOADING STRESS, NISSAN STATES, WHEN EXCESSIVE STRESS IS APPLIED WHILE LOADING THE HOSE ONTO THE MANDREL, HOSE DEFORMATION (WHICH LOOKS LIKE A BULGE) CAN OCCUR AROUND THE BENDING AREA.A CRACK WILL START TO FORM ON THE INSIDE OF THE HOSE AT THE AREA OF DEFORMATION.REGARDING UNLOADING STRESS, NISSAN STATES, AFTER THE CURING PROCESS, IN SOME INSTANCES THE HOSE STUCK TO THE MANDREL TIGHTLY AND THE OPERATOR HAD TO APPLY A SIGNIFICANT AMOUNT OF FORCE TO PULL THE HOSE FROM THE MANDREL.IF THIS OPERATION WAS PERFORMED ROUGHLY, THE INTERIOR OF THE HOSE COULD BE DAMAGED BY THE MANDREL EDGE. NISSAN ALSO STATES, BECAUSE OF THE WAY THE HOSES RECEIVED INTERNAL DAMAGE, A DAMAGED HOSE WAS PRODUCED AS A RARE, RANDOM EVENT RATHER THAN SYSTEMATICALLY.THE TRANSMISSION HOSE SUPPLIER, COOPER STANDARD AUTOMOTIVE, IMPLEMENTED PROCESS IMPROVEMENTS THAT LIMIT EXCESSIVE STRESS ON THE HOSE DURING MANUFACTURE. NISSAN HAS SHOWN THAT THIS TRANSMISSION COOLER HOSE WAS ASSEMBLED ON MY 2007 AND MY 2008 MAXIMA VEHICLES.NISSAN REDESIGNED THE TRANSMISSION COOLER HOSE ON MY 2009 MAXIMA, AND THE HOSE IS MANUFACTURED BY A NEW SUPPLIER.NISSAN HAS ALSO SHOWN THAT THE LEAKS MOSTLY OCCUR WITHIN THE FIRST 2000 MILES OF SERVICE WITH A SEVERE DROP IN INCIDENTS BEYOND 2000 MILES OF SERVICE.MOST LEAKS HAVE ALREADY OCCURRED, AND THE ONE FIRE WAS MINOR. A SAFETY-RELATED DEFECT HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.ACCORDINGLY THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.