The contact owns a 2007 Nissan Maxima. The contact stated while attempting to start the vehicle in the morning, the vehicle would start after several attempts. The contact stated that he opened the hood and checked the battery and became aware that both battery terminals were corroded. The contact cleaned the terminals and still…
Read full complaint
The contact owns a 2007 Nissan Maxima. The contact stated while attempting to start the vehicle in the morning, the vehicle would start after several attempts. The contact stated that he opened the hood and checked the battery and became aware that both battery terminals were corroded. The contact cleaned the terminals and still had issues with starting the vehicle. Additionally, the steering wheel had locked. The contact was unable to unlock the steering wheel. The contact stated no warning light was illuminated. The contact stated that inserting the key in the ignition switch would not start the vehicle, and the key fob ignition option had also failed to start the vehicle. The contact stated that the steering wheel remained locked. The contact stated that the vehicle remained at the residence and was no longer drivable. The contact had not taken the vehicle to a local dealer or independent mechanic. The vehicle had not been diagnosed or repaired. The contact researched online and related the failure to NHTSA Campaign Number: 06V402000 (Steering). The manufacturer had not been informed of the failure. The failure mileage was approximately 170,000.
NHTSA ODI #11531461
215,000 miles · Feb 12, 2015
Steering
I WAS AT A NISSAN DEALERSHIP GETTING A NEW INTELLI-KEY MADE FOR THE CAR WHEN THE STEERING WHEEL LOCK BROKE. I FOUND OUT THIS WOULD BE THE THIRD TIME THIS LOCKING MECHANISM HAS BEEN REPLACED ON THIS CAR ALONE. THE TECHNICIAN TURNED THE STEERING WHEEL TO THE RIGHT AND THE LOCK BROKE AND LOCKED INTO PLACE. HOW MANY TIMES DOES …
Read full complaint
I WAS AT A NISSAN DEALERSHIP GETTING A NEW INTELLI-KEY MADE FOR THE CAR WHEN THE STEERING WHEEL LOCK BROKE. I FOUND OUT THIS WOULD BE THE THIRD TIME THIS LOCKING MECHANISM HAS BEEN REPLACED ON THIS CAR ALONE. THE TECHNICIAN TURNED THE STEERING WHEEL TO THE RIGHT AND THE LOCK BROKE AND LOCKED INTO PLACE. HOW MANY TIMES DOES THE SAME PART HAVE TO BREAK ON A NISSAN BEFORE YOU CONSIDER IT TO BE A BAD PART? THE STEERING LOCK WAS RECALLED BEFORE IT LEFT THE FACTORY, REPLACED 2 TIMES OVER THE NEXT 7 YEARS. THE STEERING LOCK IS NOT A PART THAT FAILS BECAUSE IT IS REPEATEDLY USED OR BECAUSE OF TOO MANY MILES, IT IS CAUSED BY A POOR QUALITY PART! ONCE AGAIN THIS IS THE 3RD TIME THIS PART HAS BEEN REPLACED ON THIS VEHICLE, I HAVE HAD 18 CARS OVER THE LAST 30 YEARS AND I HAVE NEVER HAD A STEERING LOCK FAIL. *TR
NHTSA ODI #10683091
50,000 miles · Jan 20, 2012
Steering
TL* THE CONTACT OWNS A 2007 NISSAN MAXIMA. WHILE DRIVING IN REVERSE APPROXIMATELY 5 MPH, THERE WAS A COMPLETE LOSS IN THE POWER STEERING FOR A PERIOD OF ONE MINUTE. THE FAILURE OCCURRED DURING COLD WEATHER TEMPERATURES. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALER ON TWO SEPARATE OCCASIONS FOR THE SIMILAR DEFECT AND THEY WERE U…
Read full complaint
TL* THE CONTACT OWNS A 2007 NISSAN MAXIMA. WHILE DRIVING IN REVERSE APPROXIMATELY 5 MPH, THERE WAS A COMPLETE LOSS IN THE POWER STEERING FOR A PERIOD OF ONE MINUTE. THE FAILURE OCCURRED DURING COLD WEATHER TEMPERATURES. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALER ON TWO SEPARATE OCCASIONS FOR THE SIMILAR DEFECT AND THEY WERE UNABLE TO DUPLICATE THE PROBLEM EACH TIME. THE MANUFACTURER WAS NOT NOTIFIED OF THE MALFUNCTION. THE APPROXIMATE FAILURE MILEAGE WAS 50,000.
NHTSA ODI #10444665
69,000 miles · Aug 17, 2010
Service Brakes, HydraulicSteeringSuspension
TL* THE CONTACT OWNS A 2007 NISSAN MAXIMA. WHILE DRIVING APPROXIMATELY 10 MPH, THE VEHICLE BEGAN TO DECREASE IN POWER. HE RELEASED THE ACCELERATOR PEDAL AND WHEN DEPRESSING IT A SECOND TIME, THE FAILURE RECURRED. THE CONTACT ASSUMED THE VEHICLE WAS OUT OF FUEL, YET THE FAILURE CORRECTED ITSELF. THE CONTACT STATED THAT THE FAILUR…
Read full complaint
TL* THE CONTACT OWNS A 2007 NISSAN MAXIMA. WHILE DRIVING APPROXIMATELY 10 MPH, THE VEHICLE BEGAN TO DECREASE IN POWER. HE RELEASED THE ACCELERATOR PEDAL AND WHEN DEPRESSING IT A SECOND TIME, THE FAILURE RECURRED. THE CONTACT ASSUMED THE VEHICLE WAS OUT OF FUEL, YET THE FAILURE CORRECTED ITSELF. THE CONTACT STATED THAT THE FAILURE WOULD OCCUR OFTEN. THE VEHICLE WAS TAKEN TO AN AUTHORIZED DEALER AND THE DEALER ADVISED HIM THAT THE ABS SENSOR WOULD NEED REPLACING. IN ADDITION, BOTH KNUCKLES AND THE HUB WOULD NEED MODIFICATION. THE DEALER DISABLED THE ABS SYSTEM. THE FAILURE MILEAGE WAS 69,000 AND THE CURRENT MILEAGE WAS 69,966.
NHTSA ODI #10350094
35,000 miles · May 5, 2010
SteeringSuspension
HEAR A CLICKING NOISE WHEN MAKING TURNS. I TOOK IT INTO THE DEALER AND THEY COULD NOT FIND ANYTHING. I WAS TOLD THEY TIGHTEN THE STEERING. I WAS CLOSE TO MY FACTORY WARRANTY EXPIRING. IT LASTED UNTIL 3 MONTHS LATER AND THE CLICKING IS BACK. I WAS TOLD I WOULD BE CHARGED TO LOOK AT SINCE IT IS OUT OF WARRANTY. *TR
NHTSA ODI #10329078
Mileage unknown · Oct 29, 2009
Steering
TL*THE CONTACT OWNS A 2007 NISSAN MAXIMA. THE STEERING WHEEL WOULD LOCK WITH THE IGNITION KNOB IN THE OFF POSITION, BUT THE VEHICLE TRANSMISSION WOULD NOT BE IN THE PARK POSITION. THE VEHICLE WAS TAKEN TO THE DEALER MULTIPLE TIMES. HIS VEHICLE IDENTIFICATION NUMBER WAS EXCLUDED FROM RECALL # 06V402000 (STEERING:COLUMN LOCKING:…
Read full complaint
TL*THE CONTACT OWNS A 2007 NISSAN MAXIMA. THE STEERING WHEEL WOULD LOCK WITH THE IGNITION KNOB IN THE OFF POSITION, BUT THE VEHICLE TRANSMISSION WOULD NOT BE IN THE PARK POSITION. THE VEHICLE WAS TAKEN TO THE DEALER MULTIPLE TIMES. HIS VEHICLE IDENTIFICATION NUMBER WAS EXCLUDED FROM RECALL # 06V402000 (STEERING:COLUMN LOCKING:ANTI-THEFT DEVICE), THEREFORE HE WAS INELIGIBLE FOR A FREE REMEDY. NO REPAIRS WERE MADE. THE CURRENT MILEAGE WAS 60000.
NHTSA ODI #10290302
Mileage unknown · Aug 6, 2008
Service Brakes, ElectricSteeringTires
FRONT END JIGGLES OR SHAKES DURING DRIVING AND STOPPING . *TR
CERTAIN PASSENGER VEHICLES EQUIPPED WITH AN 'INTELLIGENT KEY' FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 114, "THEFT PROTECTION." DURING AN INSPECTION OF SOME VEHICLES AT THE ASSEMBLY PLANT, IT WAS FOUND THAT THE STEERING WHEEL WAS LOCKED WITH THE IGNITION KNOB IN THE "OFF" POSITION BUT THE VEHICLE TRANSMISSION NOT BEING IN THE "PARK" POSITION.
Consequence & remedy
Consequence: IF THE KEY IS TURNED TO THE "OFF" POSITION WITHOUT THE TRANSMISSION BEING IN THE "PARK" POSITION, IT IS POSSIBLE THAT THE STEERING WHEEL CAN LOCK WHEN TURNED TO THE RIGHT.
Remedy: DEALERS WILL INSPECT AND REPLACE THE STEERING WHEEL LOCK ASSEMBLY FREE OF CHARGE. THE RECALL BEGAN ON DECEMBER 18, 2006. OWNERS MAY CONTACT NISSAN AT 1-800-647-7261.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
PE08045 · Transmission Hose Leak
Opened Jul 23, 2008 · Closed Oct 24, 2008
Status: closed (inferred from source dates) · Power Train:automatic Transmission; Power Train:automatic Transmission:cooling Unit And Lines
THIS PE WAS OPENED FOR MODEL YEAR (MY) 2008 NISSAN MAXIMA VEHICLES BASED ON EARLY WARNING DATA THAT THE AUTOMATIC TRANSMISSION COOLER HOSE MAY HAVE PINHOLES AND/OR CRACKS RESULTING IN A TRANSMISSION FLUID LEAK.THE LEAKED FLUID CAN CONTACT THE EXHAUST SYSTEM AND IGNITE.NISSAN HAS SHOWN THAT THE ROOT CAUSE OF THE PINHOLES AND/OR CRACKS IN THE HOSE IS EXCESSIVE STRESS DURING THE MANUFACTURE FORMING PROCESS RESULTING IN HOSE DEFORMATION AT LOADING ONTO A MANDREL, OR DAMAGE DURING UN-LOADING.REGARDING LOADING STRESS, NISSAN STATES, WHEN EXCESSIVE STRESS IS APPLIED WHILE LOADING THE HOSE ONTO THE MANDREL, HOSE DEFORMATION (WHICH LOOKS LIKE A BULGE) CAN OCCUR AROUND THE BENDING AREA.A CRACK WILL START TO FORM ON THE INSIDE OF THE HOSE AT THE AREA OF DEFORMATION.REGARDING UNLOADING STRESS, NISSAN STATES, AFTER THE CURING PROCESS, IN SOME INSTANCES THE HOSE STUCK TO THE MANDREL TIGHTLY AND THE OPERATOR HAD TO APPLY A SIGNIFICANT AMOUNT OF FORCE TO PULL THE HOSE FROM THE MANDREL.IF THIS OPERATION WAS PERFORMED ROUGHLY, THE INTERIOR OF THE HOSE COULD BE DAMAGED BY THE MANDREL EDGE. NISSAN ALSO STATES, BECAUSE OF THE WAY THE HOSES RECEIVED INTERNAL DAMAGE, A DAMAGED HOSE WAS PRODUCED AS A RARE, RANDOM EVENT RATHER THAN SYSTEMATICALLY.THE TRANSMISSION HOSE SUPPLIER, COOPER STANDARD AUTOMOTIVE, IMPLEMENTED PROCESS IMPROVEMENTS THAT LIMIT EXCESSIVE STRESS ON THE HOSE DURING MANUFACTURE. NISSAN HAS SHOWN THAT THIS TRANSMISSION COOLER HOSE WAS ASSEMBLED ON MY 2007 AND MY 2008 MAXIMA VEHICLES.NISSAN REDESIGNED THE TRANSMISSION COOLER HOSE ON MY 2009 MAXIMA, AND THE HOSE IS MANUFACTURED BY A NEW SUPPLIER.NISSAN HAS ALSO SHOWN THAT THE LEAKS MOSTLY OCCUR WITHIN THE FIRST 2000 MILES OF SERVICE WITH A SEVERE DROP IN INCIDENTS BEYOND 2000 MILES OF SERVICE.MOST LEAKS HAVE ALREADY OCCURRED, AND THE ONE FIRE WAS MINOR. A SAFETY-RELATED DEFECT HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.ACCORDINGLY THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.
Additional source detail variants (2)
Power Train:automatic Transmission:cooling Unit And Lines
THIS PE WAS OPENED FOR MODEL YEAR (MY) 2008 NISSAN MAXIMA VEHICLES BASED ON EARLY WARNING DATA THAT THE AUTOMATIC TRANSMISSION COOLER HOSE MAY HAVE PINHOLES AND/OR CRACKS RESULTING IN A TRANSMISSION FLUID LEAK.THE LEAKED FLUID CAN CONTACT THE EXHAUST SYSTEM AND IGNITE.NISSAN HAS SHOWN THAT THE ROOT CAUSE OF THE PINHOLES AND/OR CRACKS IN THE HOSE IS EXCESSIVE STRESS DURING THE MANUFACTURE FORMING PROCESS RESULTING IN HOSE DEFORMATION AT LOADING ONTO A MANDREL, OR DAMAGE DURING UN-LOADING.REGARDING LOADING STRESS, NISSAN STATES, WHEN EXCESSIVE STRESS IS APPLIED WHILE LOADING THE HOSE ONTO THE MANDREL, HOSE DEFORMATION (WHICH LOOKS LIKE A BULGE) CAN OCCUR AROUND THE BENDING AREA.A CRACK WILL START TO FORM ON THE INSIDE OF THE HOSE AT THE AREA OF DEFORMATION.REGARDING UNLOADING STRESS, NISSAN STATES, AFTER THE CURING PROCESS, IN SOME INSTANCES THE HOSE STUCK TO THE MANDREL TIGHTLY AND THE OPERATOR HAD TO APPLY A SIGNIFICANT AMOUNT OF FORCE TO PULL THE HOSE FROM THE MANDREL.IF THIS OPERATION WAS PERFORMED ROUGHLY, THE INTERIOR OF THE HOSE COULD BE DAMAGED BY THE MANDREL EDGE. NISSAN ALSO STATES, BECAUSE OF THE WAY THE HOSES RECEIVED INTERNAL DAMAGE, A DAMAGED HOSE WAS PRODUCED AS A RARE, RANDOM EVENT RATHER THAN SYSTEMATICALLY.THE TRANSMISSION HOSE SUPPLIER, COOPER STANDARD AUTOMOTIVE, IMPLEMENTED PROCESS IMPROVEMENTS THAT LIMIT EXCESSIVE STRESS ON THE HOSE DURING MANUFACTURE. NISSAN HAS SHOWN THAT THIS TRANSMISSION COOLER HOSE WAS ASSEMBLED ON MY 2007 AND MY 2008 MAXIMA VEHICLES.NISSAN REDESIGNED THE TRANSMISSION COOLER HOSE ON MY 2009 MAXIMA, AND THE HOSE IS MANUFACTURED BY A NEW SUPPLIER.NISSAN HAS ALSO SHOWN THAT THE LEAKS MOSTLY OCCUR WITHIN THE FIRST 2000 MILES OF SERVICE WITH A SEVERE DROP IN INCIDENTS BEYOND 2000 MILES OF SERVICE.MOST LEAKS HAVE ALREADY OCCURRED, AND THE ONE FIRE WAS MINOR. A SAFETY-RELATED DEFECT HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.ACCORDINGLY THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.
Power Train:automatic Transmission
THIS PE WAS OPENED FOR MODEL YEAR (MY) 2008 NISSAN MAXIMA VEHICLES BASED ON EARLY WARNING DATA THAT THE AUTOMATIC TRANSMISSION COOLER HOSE MAY HAVE PINHOLES AND/OR CRACKS RESULTING IN A TRANSMISSION FLUID LEAK.THE LEAKED FLUID CAN CONTACT THE EXHAUST SYSTEM AND IGNITE.NISSAN HAS SHOWN THAT THE ROOT CAUSE OF THE PINHOLES AND/OR CRACKS IN THE HOSE IS EXCESSIVE STRESS DURING THE MANUFACTURE FORMING PROCESS RESULTING IN HOSE DEFORMATION AT LOADING ONTO A MANDREL, OR DAMAGE DURING UN-LOADING.REGARDING LOADING STRESS, NISSAN STATES, WHEN EXCESSIVE STRESS IS APPLIED WHILE LOADING THE HOSE ONTO THE MANDREL, HOSE DEFORMATION (WHICH LOOKS LIKE A BULGE) CAN OCCUR AROUND THE BENDING AREA.A CRACK WILL START TO FORM ON THE INSIDE OF THE HOSE AT THE AREA OF DEFORMATION.REGARDING UNLOADING STRESS, NISSAN STATES, AFTER THE CURING PROCESS, IN SOME INSTANCES THE HOSE STUCK TO THE MANDREL TIGHTLY AND THE OPERATOR HAD TO APPLY A SIGNIFICANT AMOUNT OF FORCE TO PULL THE HOSE FROM THE MANDREL.IF THIS OPERATION WAS PERFORMED ROUGHLY, THE INTERIOR OF THE HOSE COULD BE DAMAGED BY THE MANDREL EDGE. NISSAN ALSO STATES, BECAUSE OF THE WAY THE HOSES RECEIVED INTERNAL DAMAGE, A DAMAGED HOSE WAS PRODUCED AS A RARE, RANDOM EVENT RATHER THAN SYSTEMATICALLY.THE TRANSMISSION HOSE SUPPLIER, COOPER STANDARD AUTOMOTIVE, IMPLEMENTED PROCESS IMPROVEMENTS THAT LIMIT EXCESSIVE STRESS ON THE HOSE DURING MANUFACTURE. NISSAN HAS SHOWN THAT THIS TRANSMISSION COOLER HOSE WAS ASSEMBLED ON MY 2007 AND MY 2008 MAXIMA VEHICLES.NISSAN REDESIGNED THE TRANSMISSION COOLER HOSE ON MY 2009 MAXIMA, AND THE HOSE IS MANUFACTURED BY A NEW SUPPLIER.NISSAN HAS ALSO SHOWN THAT THE LEAKS MOSTLY OCCUR WITHIN THE FIRST 2000 MILES OF SERVICE WITH A SEVERE DROP IN INCIDENTS BEYOND 2000 MILES OF SERVICE.MOST LEAKS HAVE ALREADY OCCURRED, AND THE ONE FIRE WAS MINOR. A SAFETY-RELATED DEFECT HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.ACCORDINGLY THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION DOES NOT CONSTITUTE A FINDING BY NHTSA THAT NO SAFETY-RELATED DEFECT EXISTS.THE AGENCY RESERVES THE RIGHT TO TAKE FURTHER ACTION IF WARRANTED BY THE CIRCUMSTANCES.
2007 Nissan Maxima Problems, Complaints & Recalls | Skip That Year
Illustration