The Body Control Module (BCM) is faulty and causes the alarm to go off on its own, lights inside the cluster glitch turning on by itself and drains the battery even with the key fob nowhere near its vicinity when off. Sometimes does not recognize the key fob.
COMPONENT SPOTLIGHT
Honda Civic electrical problems
1,532 distinct owner reports with an electrical-system component in this snapshot.
Includes the electrical-system component and its detailed subcategories. Related recalls and investigations must also name this component; they are not linked by narrative keyword alone.
54 crash reports59 fire reports30 injury reports
Reports by model year
YearTopic reportsRecallsInvestigations
20265
0020256
2020247
31202316
42202238
42202117
40202036
50201936
40201860
602017101
602016119
50201527
12201438
22201339
02201259
32201115
90201023
80200935
80200851
70200767
902006100
130200526
104200432
103200351
116200249
114200159
144200038
601999118
30199888
41199730
21199617
22199512
0019942
20199325
11199228
11199122
13199018
33198911
1319887
3319864
33Recall and investigation columns show each year’s full history. A report naming several years can appear in more than one row.
When problems were reported
Mileage at the reported incident
2210–25K
15925–50K
11250–75K
7775–100K
118100–150K
129150K+
816 reports with mileage · 716 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What owners actually said
1,532 reportsThe contact owns a 2024 Honda Civic. The contact stated that the front driver’s side headlight assembly had experienced water intrusion, and the headlight failed to illuminate as needed. The vehicle was taken to the local dealer who replaced the headlight assembly, and the vehicle was repaired. The contact stated that the due to…
Read full complaint
The contact owns a 2024 Honda Civic. The contact stated that the front driver’s side headlight assembly had experienced water intrusion, and the headlight failed to illuminate as needed. The vehicle was taken to the local dealer who replaced the headlight assembly, and the vehicle was repaired. The contact stated that the due to the water intrusion into the headlight assembly, the body control module failed to operate as needed. The manufacturer was notified of the failure, but no assistance was offered. The failure mileage was 11,000.
On on my dashboard due to a faulty malfunction in my ABS module that can only be done at Honda dealership and has to be removed only by Honda and sent off for Honda to rebuild and then sent back for them only to replace Seems ridiculous to pay $3000 for this when it's all over the Internet that this is an issue this is a compute…
Read full complaint
On on my dashboard due to a faulty malfunction in my ABS module that can only be done at Honda dealership and has to be removed only by Honda and sent off for Honda to rebuild and then sent back for them only to replace Seems ridiculous to pay $3000 for this when it's all over the Internet that this is an issue this is a computer issue this is ridiculous that this isn't there is no recall for this for this for this Honda issue it's all over Youtube this is the number one issue that's going around
With my steering wheel, when turning, the wheel will sometimes get “sticky”. Making it so I have to use extra force to get he wheel “unstuck”. Took it to my mechanic, they found a recall for the ‘22-‘23 year model civics for this same problem. The electric steering motor can sometimes fault and cause the wheel to get stuck while…
Read full complaint
With my steering wheel, when turning, the wheel will sometimes get “sticky”. Making it so I have to use extra force to get he wheel “unstuck”. Took it to my mechanic, they found a recall for the ‘22-‘23 year model civics for this same problem. The electric steering motor can sometimes fault and cause the wheel to get stuck while turning.This was not for the ‘21 year. I called my dealership, they said there was nothing I could do as there is no recall for my vin, although I’m having the exact same problem as the ‘22-‘23 models. He recommended I can the Honda 1-800 number. Pretty much got told the same thing. I was looking to get a goodwill extension, he said that would not apply due to Honda warranties. Next best thing was for me to be here filing a complaint.
There are hacks to cars that can control the computers remotely, possibly from devices such as programmable thingy remote control devices that can be programmed with different fuctions, or direct open door remote entry hacks into the vehicle port that remote control the cars functions.
On over a dozen occasions my vehicle’s check engine light randomly comes on and then my car stalls out while driving and begins decelerating quickly. It is very dangerous and scary when this has happened on the freeway or in places where there is nowhere to pull off the road. My Honda Civic is less than 2 years old and has alrea…
Read full complaint
On over a dozen occasions my vehicle’s check engine light randomly comes on and then my car stalls out while driving and begins decelerating quickly. It is very dangerous and scary when this has happened on the freeway or in places where there is nowhere to pull off the road. My Honda Civic is less than 2 years old and has already been in the service department at Honda for a combined total of more than 30 days. Honda keeps trying to replace things but the issue keeps happening and they haven’t been able to properly diagnose or fix the problem. It is unsafe to drive this car and Honda has been unable to fix it. I bought this car brand new with 0 miles and the issues started early on before I reached 20,000 miles. I attached one of the most recent invoices from Honda where they noted the fuel injectors failing and codes of misfires in all cylinders. They most recently tried replacing the fuel injector but it still hasn’t fixed the problem. This car is unsafe to drive and has been in the shop multiple times for more than 30 days for the same issue that they can’t seem to fix.
While driving, the hood prop rod dislodged from its securing clip and fell onto the positive terminal of the battery. This caused an electrical short, which led to the rod heating up rapidly and igniting a fire under the hood. The fire damaged the headlight assembly and the surrounding trim panel, though the wiring fortunately d…
Read full complaint
While driving, the hood prop rod dislodged from its securing clip and fell onto the positive terminal of the battery. This caused an electrical short, which led to the rod heating up rapidly and igniting a fire under the hood. The fire damaged the headlight assembly and the surrounding trim panel, though the wiring fortunately did not catch fire. A nearby police officer was able to extinguish the fire before it spread further. This incident posed a serious safety risk and could have resulted in more extensive damage or injury. There were no warning lights or symptoms before the failure. The issue appears to stem from the design or failure of the clip that holds the hood prop rod in place. The vehicle has not been modified and was being driven under normal conditions. A local auto body shop inspected the vehicle afterward and confirmed that the loose prop rod made contact with the battery terminal, creating a serious fire hazard. They advised reporting this as a safety issue. The manufacturer has not yet inspected the vehicle. The incident was witnessed by a police officer, and the damage was evaluated by an independent repair shop following the fire.
Our battery died in April 2025. We've had this car since October 2021 with only 8 miles on it. We've replaced: The PCV valve The PCV valve tube The MAF sensor The sparks plugs 3 times which was $90 each time Replaced our battery 2 times since April 2025 3 oil changes And finally replacing our entire fuel injector system with …
Read full complaint
Our battery died in April 2025. We've had this car since October 2021 with only 8 miles on it. We've replaced: The PCV valve The PCV valve tube The MAF sensor The sparks plugs 3 times which was $90 each time Replaced our battery 2 times since April 2025 3 oil changes And finally replacing our entire fuel injector system with the hard fuel line. And replacing the battery the first time is what revealed all these issues because we kept getting codes on our obd-ii scanner of P0172, U0038 and U0100. Honda told us once the fuel injectors were replaced then our car would be fixed but that is not the case. The car can't travel further then 5 minutes before the spark plus burn. We replaced the spark plugs on Sunday morning and we went to the store and they were charred after that drive same day.
While driving at high speed on the freeway at 65mph, my Honda Civic Hybrid experienced a sudden and complete electrical failure of the hybrid battery control module (IPU/MCM). This happened without any warning lamps, messages, or prior symptoms. The hybrid system instantly shut down, causing a dramatic loss of power and forcing …
Read full complaint
While driving at high speed on the freeway at 65mph, my Honda Civic Hybrid experienced a sudden and complete electrical failure of the hybrid battery control module (IPU/MCM). This happened without any warning lamps, messages, or prior symptoms. The hybrid system instantly shut down, causing a dramatic loss of power and forcing me to pull off the road in high-speed traffic. This placed me and other drivers at serious risk of a high-speed collision due to the abrupt power loss and inability to accelerate. The failed component is still installed and available for inspection. The issue has since been diagnosed and confirmed by an independent hybrid specialist, who identified the malfunctioning IPU. I was told this exact failure is covered by Honda Service Bulletin 20-030, which extends the warranty for affected Civic Hybrids to 10 years or 150,000 miles, however, my VIN is not included, despite the failure being identical in nature. Honda has refused to provide any assistance, stating that only specific VINs are eligible, which I believe is misleading and unjust. This defect is clearly broader than the TSB acknowledges. The sudden failure of a critical propulsion system at high speed without warning is a major safety hazard and should not be limited by an arbitrarily narrow VIN list. I urge the NHTSA to investigate this issue and require Honda to expand the scope of TSB 20-030. This defect compromises driver safety and has caused me significant financial and emotional stress, not to mention the danger it poses to others on the road. This is not an isolated incident. Many other Honda Civic Hybrid owners have reported the exact same issue, sudden IPU failure, no warnings, dangerous loss of power, on public forums and complaint databases. The narrow VIN range in TSB 20-030 is artificially limited and fails to reflect the true scope of the defect.
I have a 2016 Civic LX, and the steering is sticking when on center when the vehicle has been driving for a while/is warmed up. I have read multiple instances and reports of this issue and the EPS/rack being the culprit even when this car was released 10 years ago. There was never a bulletin or a recall for this model year but i…
Read full complaint
I have a 2016 Civic LX, and the steering is sticking when on center when the vehicle has been driving for a while/is warmed up. I have read multiple instances and reports of this issue and the EPS/rack being the culprit even when this car was released 10 years ago. There was never a bulletin or a recall for this model year but it is the same issue for the 2022-2025 model years, and it is frustrating that it is still occurring. It requires more pressure than needed to move the wheel and then it jerks as it comes loose causing need to over correction. This is very unsettling when traveling at highway speeds. I purchased the vehicle in late September of 2024, and I believe the vehicle was doing it then but i did not recognize the issue and it wasn't consistent, especially as temps were cold. The issue has gotten worse, especially as the warm weather is coming around.
Related Official recalls
210V364000 · Electrical System:ignition
Aug 5, 2010
HONDA IS RECALLING CERTAIN MODEL YEAR 2003 HONDA ACCORD, CIVIC TWO AND FOUR DOOR, AND MODEL YEAR 2003-2004 HONDA ELEMENT VEHICLES. THE INTERLOCK LEVER OF THE IGNITION SWITCH MAY UNEXPECTEDLY DEFORM, WHICH CAN ALLOW THE INTERLOCK FUNCTION OF A VEHICLE WITH AN AUTOMATIC TRANSMISSION TO BE DEFEATED.
Consequence & remedy
Consequence: REMOVAL OF THE IGNITION KEY WHEN THE GEAR SELECTOR OF A VEHICLE WITH AN AUTOMATIC TRANSMISSION HAS NOT BEEN SHIFTED TO THE PARK POSITION CAN ALLOW THE VEHICLE TO ROLL AWAY, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL REMOVE THE ORIGINAL INTERLOCK PIN AND LEVER WITHIN THE IGNITION SWITCH, AND REPLACE THEM WITH NEW, DESIGNED COMPONENTS. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 7, 2010. OWNERS MAY CONTACT HONDA AT 1-800-999-1009.
02V120000 · Electrical System:ignition:switch
May 16, 2002
ON CERTAIN SEDANS, COUPES, HATCHBACKS, AND SPORT UTILITY VEHICLES, ELECTRICAL CONTACTS IN THE IGNITION SWITCH CAN DEGRADE DUE TO THE HIGH ELECTRICAL CURRENT PASSING THROUGH THE SWITCH WHEN THE VEHICLE IS STARTED.
Consequence & remedy
Consequence: WORN CONTACTS COULD CAUSE THE ENGINE TO STALL WITHOUT WARNING, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL REPLACE THE IGNITION SWITCH. OWNER NOTIFICATION BEGAN JUNE 14, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HONDA AT 1-800-999-1009 OR ACURA AT 1-800-382-2238.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Related NHTSA investigations
4EA11012 · Low Beam Headlights Stop Illuminating
Opened Sep 12, 2011 · Closed Sep 17, 2012
Status: closed (inferred from source dates) · Electrical System:wiring:interior/under Dash; Exterior Lighting:headlights; Exterior Lighting:headlights:high/low Beam Dimmer Switch; Exterior Lighting:headlights:switch
This investigation was prompted by Preliminary Evaluation (PE) 11-017, and was based on reports from consumers alleging that both low beam headlights stopped illuminating simultaneously.Some complainants also reported that the combination switch (switch) that controls the headlights and turn signals, and/or its electrical wiring harness connector were damaged by overheating.ODI's PE information request letter asked Honda for certain data on model years (MY) 2002-2006 CR-V, 2003-2008 Pilot, 2003-2008 Element, 2001-2005 Civic, and 2000-2001 S 2000 vehicles.Analysis of complaint and Honda data show that a complete low beam headlight circuit failure occurs in models with 2-bulb headlight systems (i.e., a single bulb on each side for high and low beam).Models with 2-bulb systems include MY 2002-2004 CR-V, 2003-2005 Pilot, 2001-2003 Civic, and 2003-2008 Element.Models with 4-bulb headlight systems (i.e., two bulbs on each side, one for high and one for low beam) have different electrical circuits for the headlights and do not experience the same failure mechanism as the 2-bulb system.MY 2000-2001 S 2000 models with 2-bulb high intensity discharge headlights also have different electrical circuits for the headlights and do not experience the same failure mechanism.Honda introduced the 4-bulb headlight system in CR-V in MY 2005, in Pilot in MY 2006, and in Civic in MY 2004.On March 29, 2012 Honda submitted a defect information report (DIR) to recall 554,428 vehicles, including MY 2002-2004 CR-V and MY 2003 Pilot.In the DIR, Honda stated that tension from the combination switch wiring harness to the electrical terminal for the low beam headlight circuit could cause a small amount of motion as the combination switch was operated.This motion, over time, can wear the surface of the terminal creating copper oxide, increasing electrical resistance, which may cause the terminal to melt within the harness connector.ODI continued its investigation, and on August 31, 2012 Honda submitted another DIR to recall an additional 820,789 vehicles.This report included the MY 2002 Civic vehicles which were not subject to a prior safety recall (04V-086) for headlights, all of MY 2003 Civic, and MY 2004-2005 Pilot.Honda's DIR advised that operation of the turn signal switch lever at high speed and/or with heavy force can cause movement between the combination switch body and the sub-harness wiring connector.This can cause wear and continued movement can create copper oxide, increasing electrical resistance, and potentially causing the terminal to melt within the harness connector. Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recall 12V-136 for complete details.Honda also provided additional information on the Element model, stating that it was not recalled due to it's very low failure rate.Honda sold 301,497 Element vehicles in the United States and received 17 reports, while ODI received one report (see VOQ 10395219).Honda's technical explanation for the low rate, which was submitted under request for confidentiality, is that the headlight switch, as installed in the Element, reacts differently to the forces applied to it as compared to the recalled models.See attachment for additional information.
Additional source detail variants (4)
Electrical System:wiring:interior/under Dash
This investigation was prompted by Preliminary Evaluation (PE) 11-017, and was based on reports from consumers alleging that both low beam headlights stopped illuminating simultaneously.Some complainants also reported that the combination switch (switch) that controls the headlights and turn signals, and/or its electrical wiring harness connector were damaged by overheating.ODI's PE information request letter asked Honda for certain data on model years (MY) 2002-2006 CR-V, 2003-2008 Pilot, 2003-2008 Element, 2001-2005 Civic, and 2000-2001 S 2000 vehicles.Analysis of complaint and Honda data show that a complete low beam headlight circuit failure occurs in models with 2-bulb headlight systems (i.e., a single bulb on each side for high and low beam).Models with 2-bulb systems include MY 2002-2004 CR-V, 2003-2005 Pilot, 2001-2003 Civic, and 2003-2008 Element.Models with 4-bulb headlight systems (i.e., two bulbs on each side, one for high and one for low beam) have different electrical circuits for the headlights and do not experience the same failure mechanism as the 2-bulb system.MY 2000-2001 S 2000 models with 2-bulb high intensity discharge headlights also have different electrical circuits for the headlights and do not experience the same failure mechanism.Honda introduced the 4-bulb headlight system in CR-V in MY 2005, in Pilot in MY 2006, and in Civic in MY 2004.On March 29, 2012 Honda submitted a defect information report (DIR) to recall 554,428 vehicles, including MY 2002-2004 CR-V and MY 2003 Pilot.In the DIR, Honda stated that tension from the combination switch wiring harness to the electrical terminal for the low beam headlight circuit could cause a small amount of motion as the combination switch was operated.This motion, over time, can wear the surface of the terminal creating copper oxide, increasing electrical resistance, which may cause the terminal to melt within the harness connector.ODI continued its investigation, and on August 31, 2012 Honda submitted another DIR to recall an additional 820,789 vehicles.This report included the MY 2002 Civic vehicles which were not subject to a prior safety recall (04V-086) for headlights, all of MY 2003 Civic, and MY 2004-2005 Pilot.Honda's DIR advised that operation of the turn signal switch lever at high speed and/or with heavy force can cause movement between the combination switch body and the sub-harness wiring connector.This can cause wear and continued movement can create copper oxide, increasing electrical resistance, and potentially causing the terminal to melt within the harness connector. Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recall 12V-136 for complete details.Honda also provided additional information on the Element model, stating that it was not recalled due to it's very low failure rate.Honda sold 301,497 Element vehicles in the United States and received 17 reports, while ODI received one report (see VOQ 10395219).Honda's technical explanation for the low rate, which was submitted under request for confidentiality, is that the headlight switch, as installed in the Element, reacts differently to the forces applied to it as compared to the recalled models.See attachment for additional information.
Exterior Lighting:headlights:high/low Beam Dimmer Switch
This investigation was prompted by Preliminary Evaluation (PE) 11-017, and was based on reports from consumers alleging that both low beam headlights stopped illuminating simultaneously.Some complainants also reported that the combination switch (switch) that controls the headlights and turn signals, and/or its electrical wiring harness connector were damaged by overheating.ODI's PE information request letter asked Honda for certain data on model years (MY) 2002-2006 CR-V, 2003-2008 Pilot, 2003-2008 Element, 2001-2005 Civic, and 2000-2001 S 2000 vehicles.Analysis of complaint and Honda data show that a complete low beam headlight circuit failure occurs in models with 2-bulb headlight systems (i.e., a single bulb on each side for high and low beam).Models with 2-bulb systems include MY 2002-2004 CR-V, 2003-2005 Pilot, 2001-2003 Civic, and 2003-2008 Element.Models with 4-bulb headlight systems (i.e., two bulbs on each side, one for high and one for low beam) have different electrical circuits for the headlights and do not experience the same failure mechanism as the 2-bulb system.MY 2000-2001 S 2000 models with 2-bulb high intensity discharge headlights also have different electrical circuits for the headlights and do not experience the same failure mechanism.Honda introduced the 4-bulb headlight system in CR-V in MY 2005, in Pilot in MY 2006, and in Civic in MY 2004.On March 29, 2012 Honda submitted a defect information report (DIR) to recall 554,428 vehicles, including MY 2002-2004 CR-V and MY 2003 Pilot.In the DIR, Honda stated that tension from the combination switch wiring harness to the electrical terminal for the low beam headlight circuit could cause a small amount of motion as the combination switch was operated.This motion, over time, can wear the surface of the terminal creating copper oxide, increasing electrical resistance, which may cause the terminal to melt within the harness connector.ODI continued its investigation, and on August 31, 2012 Honda submitted another DIR to recall an additional 820,789 vehicles.This report included the MY 2002 Civic vehicles which were not subject to a prior safety recall (04V-086) for headlights, all of MY 2003 Civic, and MY 2004-2005 Pilot.Honda's DIR advised that operation of the turn signal switch lever at high speed and/or with heavy force can cause movement between the combination switch body and the sub-harness wiring connector.This can cause wear and continued movement can create copper oxide, increasing electrical resistance, and potentially causing the terminal to melt within the harness connector. Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recall 12V-136 for complete details.Honda also provided additional information on the Element model, stating that it was not recalled due to it's very low failure rate.Honda sold 301,497 Element vehicles in the United States and received 17 reports, while ODI received one report (see VOQ 10395219).Honda's technical explanation for the low rate, which was submitted under request for confidentiality, is that the headlight switch, as installed in the Element, reacts differently to the forces applied to it as compared to the recalled models.See attachment for additional information.
Exterior Lighting:headlights
This investigation was prompted by Preliminary Evaluation (PE) 11-017, and was based on reports from consumers alleging that both low beam headlights stopped illuminating simultaneously.Some complainants also reported that the combination switch (switch) that controls the headlights and turn signals, and/or its electrical wiring harness connector were damaged by overheating.ODI's PE information request letter asked Honda for certain data on model years (MY) 2002-2006 CR-V, 2003-2008 Pilot, 2003-2008 Element, 2001-2005 Civic, and 2000-2001 S 2000 vehicles.Analysis of complaint and Honda data show that a complete low beam headlight circuit failure occurs in models with 2-bulb headlight systems (i.e., a single bulb on each side for high and low beam).Models with 2-bulb systems include MY 2002-2004 CR-V, 2003-2005 Pilot, 2001-2003 Civic, and 2003-2008 Element.Models with 4-bulb headlight systems (i.e., two bulbs on each side, one for high and one for low beam) have different electrical circuits for the headlights and do not experience the same failure mechanism as the 2-bulb system.MY 2000-2001 S 2000 models with 2-bulb high intensity discharge headlights also have different electrical circuits for the headlights and do not experience the same failure mechanism.Honda introduced the 4-bulb headlight system in CR-V in MY 2005, in Pilot in MY 2006, and in Civic in MY 2004.On March 29, 2012 Honda submitted a defect information report (DIR) to recall 554,428 vehicles, including MY 2002-2004 CR-V and MY 2003 Pilot.In the DIR, Honda stated that tension from the combination switch wiring harness to the electrical terminal for the low beam headlight circuit could cause a small amount of motion as the combination switch was operated.This motion, over time, can wear the surface of the terminal creating copper oxide, increasing electrical resistance, which may cause the terminal to melt within the harness connector.ODI continued its investigation, and on August 31, 2012 Honda submitted another DIR to recall an additional 820,789 vehicles.This report included the MY 2002 Civic vehicles which were not subject to a prior safety recall (04V-086) for headlights, all of MY 2003 Civic, and MY 2004-2005 Pilot.Honda's DIR advised that operation of the turn signal switch lever at high speed and/or with heavy force can cause movement between the combination switch body and the sub-harness wiring connector.This can cause wear and continued movement can create copper oxide, increasing electrical resistance, and potentially causing the terminal to melt within the harness connector. Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recall 12V-136 for complete details.Honda also provided additional information on the Element model, stating that it was not recalled due to it's very low failure rate.Honda sold 301,497 Element vehicles in the United States and received 17 reports, while ODI received one report (see VOQ 10395219).Honda's technical explanation for the low rate, which was submitted under request for confidentiality, is that the headlight switch, as installed in the Element, reacts differently to the forces applied to it as compared to the recalled models.See attachment for additional information.
Exterior Lighting:headlights:switch
This investigation was prompted by Preliminary Evaluation (PE) 11-017, and was based on reports from consumers alleging that both low beam headlights stopped illuminating simultaneously.Some complainants also reported that the combination switch (switch) that controls the headlights and turn signals, and/or its electrical wiring harness connector were damaged by overheating.ODI's PE information request letter asked Honda for certain data on model years (MY) 2002-2006 CR-V, 2003-2008 Pilot, 2003-2008 Element, 2001-2005 Civic, and 2000-2001 S 2000 vehicles.Analysis of complaint and Honda data show that a complete low beam headlight circuit failure occurs in models with 2-bulb headlight systems (i.e., a single bulb on each side for high and low beam).Models with 2-bulb systems include MY 2002-2004 CR-V, 2003-2005 Pilot, 2001-2003 Civic, and 2003-2008 Element.Models with 4-bulb headlight systems (i.e., two bulbs on each side, one for high and one for low beam) have different electrical circuits for the headlights and do not experience the same failure mechanism as the 2-bulb system.MY 2000-2001 S 2000 models with 2-bulb high intensity discharge headlights also have different electrical circuits for the headlights and do not experience the same failure mechanism.Honda introduced the 4-bulb headlight system in CR-V in MY 2005, in Pilot in MY 2006, and in Civic in MY 2004.On March 29, 2012 Honda submitted a defect information report (DIR) to recall 554,428 vehicles, including MY 2002-2004 CR-V and MY 2003 Pilot.In the DIR, Honda stated that tension from the combination switch wiring harness to the electrical terminal for the low beam headlight circuit could cause a small amount of motion as the combination switch was operated.This motion, over time, can wear the surface of the terminal creating copper oxide, increasing electrical resistance, which may cause the terminal to melt within the harness connector.ODI continued its investigation, and on August 31, 2012 Honda submitted another DIR to recall an additional 820,789 vehicles.This report included the MY 2002 Civic vehicles which were not subject to a prior safety recall (04V-086) for headlights, all of MY 2003 Civic, and MY 2004-2005 Pilot.Honda's DIR advised that operation of the turn signal switch lever at high speed and/or with heavy force can cause movement between the combination switch body and the sub-harness wiring connector.This can cause wear and continued movement can create copper oxide, increasing electrical resistance, and potentially causing the terminal to melt within the harness connector. Please see both DIRs at http://www-odi.nhtsa.dot.gov/recalls/ under safety recall 12V-136 for complete details.Honda also provided additional information on the Element model, stating that it was not recalled due to it's very low failure rate.Honda sold 301,497 Element vehicles in the United States and received 17 reports, while ODI received one report (see VOQ 10395219).Honda's technical explanation for the low rate, which was submitted under request for confidentiality, is that the headlight switch, as installed in the Element, reacts differently to the forces applied to it as compared to the recalled models.See attachment for additional information.
EA09001 · Ignition Shift Interlock
Opened Jan 5, 2009 · Closed Oct 14, 2010
Status: closed (inferred from source dates) · Electrical SYSTEM:IGNITION:ANTI-THEFT:CONTROL Module; Electrical System:ignition:switch
On August 4, 2010, American Honda Motor Co. (Honda) submitted a Defect Information Report (DIR) to NHTSA regarding a ignition interlock defect in approximately 384,220 model year (MY) 2003 Honda Accord and Civic and MY 2003 and 2004 Honda Element vehicles with automatic transmissions (Recall 10V-364).In a September 22, 2010 supplemental DIR, Honda expanded the scope of the recall population based on manufacturing and complaint data.The total population for the complete recall is approximately 551,498 vehicles.The information listed in this closing report refers only to the subject vehicles, MY 2003 Accords with automatic transmissions.According to Honda's DIR, Under certain conditions the interlock lever of the ignition switch may unexpectedly deform, which can allow the interlock function of a vehicle with an automatic transmission to be defeated if the driver does not follow the typical shut-down procedure of shifting the gear selector to the Park position before rotating the ignition key to the off position. Removal of the ignition key when the gear selector of a vehicle with an automatic transmission has not been shifted to the Park position can allow the vehicle to roll away, increasing the risk of a crash.Honda's dealers will be instructed to inspect the ignition interlock switch and, if necessary, replace the original interlock pin and lever within the ignition switch and replace them with new, redesigned parts.This investigation is closed.
Additional source detail variants (2)
Electrical SYSTEM:IGNITION:ANTI-THEFT:CONTROL Module
On August 4, 2010, American Honda Motor Co. (Honda) submitted a Defect Information Report (DIR) to NHTSA regarding a ignition interlock defect in approximately 384,220 model year (MY) 2003 Honda Accord and Civic and MY 2003 and 2004 Honda Element vehicles with automatic transmissions (Recall 10V-364).In a September 22, 2010 supplemental DIR, Honda expanded the scope of the recall population based on manufacturing and complaint data.The total population for the complete recall is approximately 551,498 vehicles.The information listed in this closing report refers only to the subject vehicles, MY 2003 Accords with automatic transmissions.According to Honda's DIR, Under certain conditions the interlock lever of the ignition switch may unexpectedly deform, which can allow the interlock function of a vehicle with an automatic transmission to be defeated if the driver does not follow the typical shut-down procedure of shifting the gear selector to the Park position before rotating the ignition key to the off position. Removal of the ignition key when the gear selector of a vehicle with an automatic transmission has not been shifted to the Park position can allow the vehicle to roll away, increasing the risk of a crash.Honda's dealers will be instructed to inspect the ignition interlock switch and, if necessary, replace the original interlock pin and lever within the ignition switch and replace them with new, redesigned parts.This investigation is closed.
Electrical System:ignition:switch
On August 4, 2010, American Honda Motor Co. (Honda) submitted a Defect Information Report (DIR) to NHTSA regarding a ignition interlock defect in approximately 384,220 model year (MY) 2003 Honda Accord and Civic and MY 2003 and 2004 Honda Element vehicles with automatic transmissions (Recall 10V-364).In a September 22, 2010 supplemental DIR, Honda expanded the scope of the recall population based on manufacturing and complaint data.The total population for the complete recall is approximately 551,498 vehicles.The information listed in this closing report refers only to the subject vehicles, MY 2003 Accords with automatic transmissions.According to Honda's DIR, Under certain conditions the interlock lever of the ignition switch may unexpectedly deform, which can allow the interlock function of a vehicle with an automatic transmission to be defeated if the driver does not follow the typical shut-down procedure of shifting the gear selector to the Park position before rotating the ignition key to the off position. Removal of the ignition key when the gear selector of a vehicle with an automatic transmission has not been shifted to the Park position can allow the vehicle to roll away, increasing the risk of a crash.Honda's dealers will be instructed to inspect the ignition interlock switch and, if necessary, replace the original interlock pin and lever within the ignition switch and replace them with new, redesigned parts.This investigation is closed.
DP00007 · Ignition Distributor
Opened Nov 13, 2000 · Closed Oct 25, 2001
Status: closed (inferred from source dates) · Electrical System
THE PETITION ALLEGES THAT IGNITION DISTRIBUTOR FAILURE COULD CAUSE A VEHICLE FIRE OR A TRAFFIC ACCIDENT
PE93082 · Stalling
Opened Sep 23, 1993 · Closed Jan 31, 1994
Status: closed (inferred from source dates) · Electrical System
There is no summary currently available