2025 Toyota Camry Hybrid

I am reporting an issue with the driver seat in my 2025 Toyota Camry. The seat exhibits abnormal movement, shifting, instability, and popping sensations in the seatback area during normal driving conditions. The issue feels like looseness or movement of internal seat components and creates a distraction and potential safety concern while operating the vehicle. I brought the vehicle to a Toyota dealership for inspection. The dealership acknowledged the issue and opened a TAS (Technical Assistance System) case with Toyota Motor Corporation. An attempted repair and inspection were performed; however, the issue still persists. After researching online owner forums and discussions, I found multiple reports from other Toyota Camry owners describing similar driver seat problems, suggesting this may not be an isolated incident. The ongoing seat movement negatively affects driver confidence and comfort and may create a safety risk by distracting the driver or altering seating position while driving.

The driver’s seat backrest (lumbar support area) constantly pops and shifts (makes physical movement) while accelerating, braking, going over bumps, and when making body adjustments. I have already visited the Toyota dealership five times for this defect, but Toyota has been unable to fix the issue. The Toyota dealer first replaced the lumbar support, and subsequent attempts involved temporary measures such as installing foam and felt tape, but the defect still persists. A Toyota dealer technician mentioned that the “seat lumbar is shifting around on the metal support rail.” The popping and shifting sensation has gotten worse since last year. This is very distracting and has nearly caused an accident when felt during braking. As seen on many online forums, a lot of 2025 Camry owners (the first redesign year) are experiencing this issue, but Toyota is trying to sweep it under the rug by claiming this is a normal vehicle characteristic instead of releasing an updated or redesigned lumbar support. A driver’s seat that physically shifts and pops while driving is a safety issue.

On April 28 at 9:35AM I was exiting the parking lot in my 2025 Toyota Camry and I experienced a sudden and unintended surge of acceleration. My foot was not on the accelerator. I was coasting with foot off accelerator to exit parking lot at a speed of under 8mph when the car suddenly jerked forward and surged to 30mph. The car came to a sudden stop in the middle of the road after running stop sign and exiting the parking lot without driver input. I was jerked forward after driving very fast over a very large curb.

The vehicle has encountered repeated hybrid system and battery-related issues. Symptoms have included stalling, sudden loss of power, hybrid warning messages, charging/battery malfunction warnings, electrical system irregularities, and unsafe driving behavior. The exact root cause is currently UNKNOWN. However, based on the recurring issues and vehicle behavior, the concern appears related to the hybrid battery and/or associated electrical systems. The condition has affected the vehicle’s reliability and safe operation.

Upon shifting into reverse, the rearview camera system failed to provide a usable image, displaying only a solid white screen. This total loss of visibility occurred without warning and is a direct non-compliance with FMVSS 111. This failure mode is consistent with the Parking Assist ECU software errors currently being investigated and recalled under NHTSA 25V-744 for 2025 Toyota vehicles. The lack of a functioning rearview image directly resulted in a collision

1.The driver-side bumper/bumper cover and/or bumper attachment clips, brackets, or mounting points failed or malfunctioned. The bumper was protruding on the driver’s side and was not staying properly secured to the vehicle. Repairs have already been completed by an independent auto body shop. I have repair documentation, photos, and/or invoices available to support the complaint. 2.My safety and the safety of others were put at risk because the bumper was protruding and not properly secured on the driver’s side. I was concerned that the bumper could become further detached while driving, especially at highway speeds, creating a road hazard for other drivers or pedestrians. The protruding bumper could also affect the vehicle’s exterior safety structure, cause distraction while driving, or worsen if the vehicle hit a bump, pothole, or experienced normal road vibration. 3.Yes. The problem was confirmed by an independent auto body shop. They inspected the bumper issue and repaired it. I was also advised by the shop that they have seen similar issues with Toyota bumpers and that this appears to be a common problem. The repair cost was approximately $1,000 out of pocket. 4. The vehicle/component was inspected by an independent auto body shop. To my knowledge, it has not yet been inspected by Toyota, police, or insurance representatives. I am filing this complaint so the issue can be documented and reviewed as a possible safety or manufacturing-related concern. 5.There were no warning lamps or dashboard messages related to this issue. The main symptom was visible: the bumper began protruding on the driver’s side and was not staying properly attached. I first noticed the issue on or around June 10, 2025. The condition appeared to worsen or remain unresolved until I had it repaired by an independent auto body shop. I am filing this complaint regarding a bumper issue on my Toyota vehicle. The driver-side bumper/bumper cover began protruding and was not staying properly

While pulling out of my driveway, I heard a loud popping sound. Immediately afterward, there was a burning plastic-type odor. At that time, there were no visible signs of damage, no warning lights on the dashboard, and the vehicle appeared to be operating normally. Later that day, while driving, I noticed a shimmering effect in the bottom right corner of the windshield that caught my attention. Upon closer inspection, I realized that the windshield had cracked. It appeared that the earlier popping sound was caused by the initial crack, which was now beginning to spread. I took the vehicle to the dealership that same afternoon to have the issue documented. The technician on duty inspected the windshield, along with a sales advisor and my original salesperson, who was present at the time. The following day, I returned to the dealership, where the service director examined the windshield and found no evidence of impact damage. I was then instructed to bring the vehicle back for evaluation by an official manufacturer representative. After a visual inspection by the Toyota rep, I was informed that the damage would not be covered under warranty. This was over a month after I initially reported the issue and the crack had spread much further by that point. The windshield appears to have broken spontaneously, yet the manufacturer has declined to repair or replace it under warranty coverage. The damage came from the interior portion of the glass which seems like a manufacturing defect.