2026 Hyundai Palisade

Following Hyundai Recall 296 on my 2026 Hyundai Palisade Calligraphy, the second-row “car seat friendly” tilt-and-slide seat functionality changed significantly after the required software update. Prior to the recall update, the seats operated with a one-touch tilt-and-slide function that allowed easy third-row access while using car seats and booster seats. After the recall update: - the seat now requires continuously holding the button during operation, - the seat no longer returns to its previous seating position correctly, - the seatback returns at an unusually upright angle, - and multiple additional manual adjustments are required afterward to reposition the seat properly. As a parent using booster seats daily, I am concerned this updated behavior creates usability issues for children independently accessing the third row and may result in children sitting in improperly adjusted seating positions unless an adult fully readjusts the seat each time. I understand and support the original safety recall, but I wanted to formally document concerns regarding the significantly altered functionality and real-world family usability following the recall remedy.

My vehicle is subject to Manufacturer Recall 297/NHTSA Recall 26V169. My dashboard is indicating that the third row driver seat is buckled when it is not. Also, when the seat belt is actually buckled, it will sometimes indicate that it is not. This is a safety issue as I cannot tell whether the seat belt is actually buckled or not. Additionally, the seat will not fold because it thinks a person is sitting in the seat. I have taken my vehicle for to Great Lakes Hyundai of Dublin twice (May 6 and April 16th) to complete the recall. Both times they did not complete the recall as they did not have the parts, said they could not order them, and did not know exactly when they would receive them.

I am reporting a safety concern following an over-the-air (OTA) recall update (Hyundai Recall #296) on my 2026 Hyundai Palisade Calligraphy AWD (software version 263Q.LX3.USA.ccNC.001.001.260326). I understand this recall was issued in response to a fatal incident involving the second-row seat system, which is why this issue is especially concerning. Since the update, the second-row walk-in seat function used for third-row access is not operating correctly. When I press the button near the headrest, the seat does not move fully forward, and I have to use the manual slide forward/back button to move it the rest of the way. When returning the seat, it does not go all the way back, and the seatback remains tilted forward at about a 70–80 degree angle instead of returning to its normal upright position, requiring manual adjustment using the recline button. In addition, during one occurrence when the second-row seat was activated, the front passenger seat moved slightly on its own without any input. This unexpected movement of another seat is especially concerning. This behavior began only after the recall update and appears to be a malfunction, possibly related to seat calibration or software coordination between seat systems. This creates a potential safety issue involving unintended seat movement and improper seat positioning.

I went to start the car and it was totally dead. It is used 7 days a week and driven back and forth to work 5 days a week. There was no warning and nothing was left on, just dead. I took the car to the dealer yesterday and they did an electrial system analysis and only found the battery had a slight discharge. Which is frustrating because I don't know when or where this could happen again. The dealer charged the battery and it seems ok at this point.

I am reporting that Hyundai’s Recall 296 remedy appears inadequate and that Hyundai closed the recall on my vehicle even though the underlying rear-seat safety hazard remained unresolved. My complaint involves the second- and third-row powered seat system, including the fold/stow and walk-in functions. My core safety complaint is that the second-row seat continued to move under powered operation despite resistance from a properly installed child seat using LATCH. I also reported that the third-row seat could still collapse under powered operation despite the presence of an object. This is a crush/entrapment hazard, especially for children. I presented the vehicle for this same rear-seat safety concern multiple times. Even after Hyundai and the dealer treated the recalls as completed, the condition remained unresolved and I returned the vehicle again for the same issue. Hyundai and the dealer changed and used inconsistent completion dates while continuing software/update activity and then still failed to acknowledge my real-world safety concerns after the supposed repair. I also reported additional post-update problems including fluctuating cabin air temperature, blower speed fluctuation without input, and reduced ventilated-seat cooling. Hyundai ultimately took the position that those systems were operating normally and instructed the dealer to release the vehicle. My complaint is not merely that Hyundai issued a recall. My complaint is that Hyundai treated Recall 296 as completed, changed the vehicle’s seat functionality by disabling or limiting previously available automatic features, used inconsistent completion timing, and still failed to correct or acknowledge the underlying safety defect I continued reporting. I am asking NHTSA to review whether Recall 296 is actually correcting the defect in service, or whether affected vehicles remain unsafe after Hyundai marks the recall complete.

I picked up my vehicle from the dealership after it being there for almost 2 weeks for multiple DTC codes, a dash cam component replacement, and recall updates. On the way home, my check engine light flashed on and off multiple times while driving at highway speeds (although no codes were recorded in my Hyundai app diagnostics). When I exited the highway, I came to a stop sign on the off ramp and waited till cross traffic cleared. I went to accelerate into traffic, but my car would barely move. This happened 4 more times in the short drive to my home. This could pose a serious safety risk if I'm unable to accelerate to merge into traffic and get stuck in cross traffic.

I am reporting an inadequate and deceptive remedy for NHTSA Recall 296 (Hyundai Recall 296) regarding the 2026 Palisade Calligraphy. The original safety defect involved the failure of the power-folding 2nd and 3rd-row seats to detect obstructions, leading to a known fatality. However, instead of repairing the defective sensors with functional hardware, Hyundai’s 'remedy' involves a software update that permanently disables advertised vehicle functionality.The 'One-Touch' automatic folding feature, which was a primary selling point of this $55,000+ luxury trim, has been deleted. Furthermore, all touchscreen controls for these seats have been disabled. Owners are now forced to manually hold physical buttons for the duration of the seat movement. This 'fix' shifts the burden of safety onto the consumer rather than repairing the vehicle's faulty equipment. I believe this remedy is a 'feature-stripping' measure to avoid the cost of a proper hardware repair, and it constitutes a substantial loss of vehicle value and utility.

While driving on a California freeway at approximately 70mph, the engine check light began flashing, the vehicle experienced a sudden and severe power loss, entered reduced power mode, and began violently shaking. Engine braking occurred without brake light activation, creating an immediate rear-end collision risk from following traffic. The vehicle would not stop shaking until restarted. This occurred twice — once in January 2026 and again in March 2026, both on the freeway with passengers in the vehicle. The dealer confirmed fault codes P0303 (Cylinder 3 Misfire), P0306 (Cylinder 6 Misfire), and P0300 (Random/Multiple Misfire) on both visits. On the first visit the dealer called the codes normal and returned the vehicle unrepaired. The second visit lasted 44 days. The dealer could not reproduce the fault during the entire 44-day period. A Hyundai Field Service Engineer physically visited the dealership and applied a special software update to the Engine Control Module. The closed repair order documents this as "UPDATE SPECIAL SOFTWARE INTO ENGINE CONTROL UNIT" with no TSB number, no software version before or after, and no GDS event number. The dealer confirmed they have no access to this update and cannot verify what was changed. No Proof of Correction was issued for California emissions compliance. The two recalls performed on the same repair order both have proper TSB numbers and STUI documentation. The ECM update has none. Concerned about emissions compliance and potential fault code suppression on a California-registered vehicle.

My [XXX] old was sitting in the middle right captain chair in her carseat. My [XXX] daughter was in the third row. My [XXX] daughter accidentally hit the power seat tilt button making the seat my [XXX] old was sitting in push up against the back of the front right passenger seat, crushing my [XXX] olds feet, where she suffered a broken foot where the toes meet the rest of the foot. We had to bring my [XXX] to the emergency room and podiatrist where xrays confirmed the injury. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)