I was traveling 58 mph on hwy 270 in Malvern Arkansas. The power steering turned off, the emergency brake engaged and flashed, and the ABS shut off. I replaced the steering sensor with an original mopar part off of my vin number and if i turn tightly it still triggers a code. The entire sensor and spring has been relplaced. It…
Read full complaint
I was traveling 58 mph on hwy 270 in Malvern Arkansas. The power steering turned off, the emergency brake engaged and flashed, and the ABS shut off. I replaced the steering sensor with an original mopar part off of my vin number and if i turn tightly it still triggers a code. The entire sensor and spring has been relplaced. It was obvious the original part shorted out It is VERY SENSITIVE to heat, the hotter it gets the more shut down of power steering, and activating the emergency brake while driving is experienced. I bought this car new and have taken excellent care of it.
NHTSA ODI #11751658
Mileage unknown · Dec 30, 2025
SteeringUnknown Or Other
Over 2 years ago I took my vehicle in for an oil change and asked them to drive it and see why it sometimes pulls the steering when going around a curve to the left. they drove it and said it never did pull. Since then, it now pulls to the right when going around curves to the right also. It is doing it more frequently and I …
Read full complaint
Over 2 years ago I took my vehicle in for an oil change and asked them to drive it and see why it sometimes pulls the steering when going around a curve to the left. they drove it and said it never did pull. Since then, it now pulls to the right when going around curves to the right also. It is doing it more frequently and I am in fear that it will either cause me to go off the road or hit someone when it all of a sudden jerks, like it is catching on something in the tire or something. I wouldn't even let my grandson drive it when he got his learners permit. I have since then decided to look for a safer vehicle and will be trading it since no one can figure out the issue. It jerks hard all of a sudden and you have to make sure you are holding the steering wheel tight. I am reporting to hopefully prevent an accident.
NHTSA ODI #11707706
Mileage unknown · Mar 15, 2023
SteeringUnknown Or Other
AC still smells meldo thru the vents fixed it last year or so still issues steering makes piping noise when backing up to the right
NHTSA ODI #11512076
Mileage unknown · Dec 6, 2022
Electrical SystemFuel/propulsion SystemSteering
Instrument cluster and radio “monitor “stopped displaying vehicle information causing everything to disrupt driving while driving in traffic. Steering was swaying and difficult to drive. There was a recall # Safety Recall V32/NHTSA 19V-203 for the same problem so it now has the same issues.
NHTSA ODI #11496206
Mileage unknown · Jul 8, 2022
SteeringSuspensionWheels
When making a right turn at approximately 5 miles per hour the front driver side suspension arm failed catastrophically causing the wheel, brake assembly, part of the suspension arm, and a small part of the frame of the vehicle to break off and roll approximately 75 feet into traffic. This also caused my break system to fail ent…
Read full complaint
When making a right turn at approximately 5 miles per hour the front driver side suspension arm failed catastrophically causing the wheel, brake assembly, part of the suspension arm, and a small part of the frame of the vehicle to break off and roll approximately 75 feet into traffic. This also caused my break system to fail entirely. The week of the incident the Vehicle had been driven approximately 120 miles under conditions that would be considered normal for the vehicle. There were no warning lights illuminated and there were no sounds or signs that failure was imminent. Vehicle is pending inspection from insurance company. Photos available upon request, parts available for inspection upon request.
NHTSA ODI #11472845
Mileage unknown · May 26, 2022
Electrical SystemSteeringUnknown Or Other
The vehicles first issue I had was about a month of owning the vehicle , with the Uconnect infotainment system not wanting to turn off or on and being frozen with only showing a still image of the back camera. I fixed it after I disconnected the battery for about 2 minutes. Then I had a transmission problem which needed servic…
Read full complaint
The vehicles first issue I had was about a month of owning the vehicle , with the Uconnect infotainment system not wanting to turn off or on and being frozen with only showing a still image of the back camera. I fixed it after I disconnected the battery for about 2 minutes. Then I had a transmission problem which needed servicing not even a year into owning the vehicle. I had to go to the service center to have part replaced, took about a month to get replaced due to back order. Then in June of 2021 the car wouldn't go in reverse or drive. As if the emergency brake was on and wouldn't budge. Had to tow the car to the dealership and leave overnight. When the car was dropped off at the dealership it had to be shaken off the tow bed. Was called to come pick the care up the next day because "no issues were found and car is functioning properly". Now in April of 2022 the steering wheel makes a grinding sound as if it's chewing rocks inside. When it was taken to the dealership was advised the steering column would need to be replaced and the part would be available in the first week of May. When I called to follow up, they advised it would be in May 12th. I called to confirm if that was true and was told the part would now come May 26th. Called again and part won't be available until June 9th. When making turns in vehicle steering wheel sticks and power steering is disabled. feels like I'm going to crash or flip the vehicle.
NHTSA ODI #11466220
Mileage unknown · Sep 21, 2020
Steering
TOTAL LOSS OF POWER STEERING WHILE DRIVING. WE WERE TRAVELING ON A MAIN ROAD DOING 30 MPH WITH AUTOS IN FRONT AND BEHIND US. SLOWED DOWN AND ATTEMPTED TO TURN ONTO SIDE STREET. IT WAS VERY HARD TO TURN ONTO THE SIDE STREET SINCE THERE WAS ABOUT 10 % OF POWER STEERING ASSIST. YOU COULD BARELY STEER INTO A PARKING SPOT. I CALLED…
Read full complaint
TOTAL LOSS OF POWER STEERING WHILE DRIVING. WE WERE TRAVELING ON A MAIN ROAD DOING 30 MPH WITH AUTOS IN FRONT AND BEHIND US. SLOWED DOWN AND ATTEMPTED TO TURN ONTO SIDE STREET. IT WAS VERY HARD TO TURN ONTO THE SIDE STREET SINCE THERE WAS ABOUT 10 % OF POWER STEERING ASSIST. YOU COULD BARELY STEER INTO A PARKING SPOT. I CALLED FOR A TOW TRUCK TO DELIVER THE 2019 DODGE CHARGER SRT HELLCAT TO MY RESIDENCE. I WILL BE CALLING THE CLOSEST DODGE DEALER/ REPAIR CENTER FOR DIAGNOSTIC AND REPAIRS TO BE MADE. THANK GOD NO PEOPLE, INJURED, PROPERTIES OR VEHICLES WERE DAMAGED OR KILLED. .
NHTSA ODI #11360134
Mileage unknown · May 4, 2020
Service BrakesSteeringWheels
I TOOK MY CAR TO GET A OIL CHANGE AT THE DODGE DEALERSHIP. WHEN IT WAS RETURNED TO ME I NOTICE THAT WHEN I TURN MY WHEEL ALL THE WAY TO A CERTAIN SIDE IT MAKES A LOUD RUBBING NOISE. THEY ROTATED MY TIRES AND CHANGED MY FLUIDS SO I BELIEVE IT WOULD EVENTUALLY GO AWAY. IT HASN'T
NHTSA ODI #11323222
600 miles · Apr 16, 2019
Steering
WE'VE PURCHASED 15 PURSUIT RATED CHARGERS THIS YEAR. OUT OF THE 15 WE HAVE FOUND 2 SO FAR WITH STEERING FAILURES. ONE FAILURE WAS DURING IDLING FOR A PERIOD OF TIME, THE OTHER AFTER A HIGH SPEED PURSUIT CAUSING THE POWER STEERING TO FAIL UNDER EXTREME DRIVING CONDITIONS.*DT CONSUMER PURCHASED VEHICLES WITH THESE 2 VINS[XXX] …
Read full complaint
WE'VE PURCHASED 15 PURSUIT RATED CHARGERS THIS YEAR. OUT OF THE 15 WE HAVE FOUND 2 SO FAR WITH STEERING FAILURES. ONE FAILURE WAS DURING IDLING FOR A PERIOD OF TIME, THE OTHER AFTER A HIGH SPEED PURSUIT CAUSING THE POWER STEERING TO FAIL UNDER EXTREME DRIVING CONDITIONS.*DT CONSUMER PURCHASED VEHICLES WITH THESE 2 VINS[XXX] AND [XXX]. THE VIN PROVIDED HAS NO DISPLAYABLE RECORDS. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR *DT VEHICLE TAKEN TO SERVICE DEALER.*JB
Chrysler (FCA US, LLC) (Stellantis) is recalling certain 2018-2021 Dodge Charger and Chrysler 300 vehicles. The right and left side curtain air bag inflators may rupture due to a manufacturing defect.
Consequence & remedy
Consequence: An inflator rupture may result in sharp metal fragments striking occupants, resulting in injury or death.
Remedy: Dealers will replace both side curtain air bags, free of charge. Owner notification letters were mailed beginning February 20, 2025. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 19B.
Chrysler (FCA US LLC) is recalling certain 2018-2020 Dodge Charger Pursuit vehicles equipped with a "stealth mode." When stealth mode is selected, the backup camera rearview image will not display when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rearview Mirrors."
Consequence & remedy
Consequence: The lack of a back-up camera display increases the risk of a crash.
Remedy: Chrysler will notify owners, and dealers will update body control module software to disable stealth mode when the vehicle is shifted into "Reverse", free of charge. The recall began October 22, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is W62.
Chrysler (FCA US LLC) is recalling certain 2019 Dodge Challenger and Charger vehicles. An incompatible front wheel and brake package was installed and may allow the front tire to contact the steering knuckle, causing tire damage.
Consequence & remedy
Consequence: A damaged tire can suddenly lose air pressure and increase the risk of a crash.
Remedy: FCA US will notify owners, and dealers will replace the front wheels and inspect and replace the front tires, as necessary. In addition, dealers will inspect the wheel alignment, adjusting it if necessary. These repairs will be performed free of charge. The recall began December 19, 2019. Owners may contact FCA US customer service at 1-800-853-1403. FCA's number for this recall is VB0.
Additional source detail variants (3)
Service Brakes
Chrysler (FCA US LLC) is recalling certain 2019 Dodge Challenger and Charger vehicles. An incompatible front wheel and brake package was installed and may allow the front tire to contact the steering knuckle, causing tire damage.
Consequence: A damaged tire can suddenly lose air pressure and increase the risk of a crash.
Remedy: FCA US will notify owners, and dealers will replace the front wheels and inspect and replace the front tires, as necessary. In addition, dealers will inspect the wheel alignment, adjusting it if necessary. These repairs will be performed free of charge. The recall began December 19, 2019. Owners may contact FCA US customer service at 1-800-853-1403. FCA's number for this recall is VB0.
Wheels
Chrysler (FCA US LLC) is recalling certain 2019 Dodge Challenger and Charger vehicles. An incompatible front wheel and brake package was installed and may allow the front tire to contact the steering knuckle, causing tire damage.
Consequence: A damaged tire can suddenly lose air pressure and increase the risk of a crash.
Remedy: FCA US will notify owners, and dealers will replace the front wheels and inspect and replace the front tires, as necessary. In addition, dealers will inspect the wheel alignment, adjusting it if necessary. These repairs will be performed free of charge. The recall began December 19, 2019. Owners may contact FCA US customer service at 1-800-853-1403. FCA's number for this recall is VB0.
Tires
Chrysler (FCA US LLC) is recalling certain 2019 Dodge Challenger and Charger vehicles. An incompatible front wheel and brake package was installed and may allow the front tire to contact the steering knuckle, causing tire damage.
Consequence: A damaged tire can suddenly lose air pressure and increase the risk of a crash.
Remedy: FCA US will notify owners, and dealers will replace the front wheels and inspect and replace the front tires, as necessary. In addition, dealers will inspect the wheel alignment, adjusting it if necessary. These repairs will be performed free of charge. The recall began December 19, 2019. Owners may contact FCA US customer service at 1-800-853-1403. FCA's number for this recall is VB0.
Chrysler (FCA US LLC) is recalling certain 2019 Dodge Charger vehicles. The driver and passenger sun visors may lack the required air bag warning information. As such, these vehicles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Consequence & remedy
Consequence: Failure to provide the air bag warning information increases the risk of injury.
Remedy: Chrysler has notified owners, and dealers will replace the driver and passenger sun visors, free of charge. The recall began April 17, 2019. Owners may contact FCA US customer service at 1-800-853-1403. Chrysler's number for this recall is V35.
Chrysler (FCA US LLC) is recalling certain 2019 Dodge Challenger and Charger and Chrysler 300 vehicles. The instrument cluster may not properly illuminate driver warnings. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 101, "Control and Displays."
Consequence & remedy
Consequence: Failure of the instrument cluster to properly illuminate may prevent the driver from receiving warnings about the vehicle's systems, increasing the risk of crash.
Remedy: Chrysler has notified owners, and dealers will update the instrument cluster software, free of charge. The recall began April 8, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V32.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
2019 Dodge Charger Problems, Complaints & Recalls | Skip That Year
Illustration