I called for a jumpstart for my truck after it cut off while I was turning onto a parking lot I hit a bump and it just cut off. I had to turn the truck completely off then start it again, after it started I made it completely onto the lot and parked it. When I went to start it again it wouldn’t turn over or startup. I used my St…
Read full complaint
I called for a jumpstart for my truck after it cut off while I was turning onto a parking lot I hit a bump and it just cut off. I had to turn the truck completely off then start it again, after it started I made it completely onto the lot and parked it. When I went to start it again it wouldn’t turn over or startup. I used my State Farm app to request for a jumpstart or possible tow 2/23/25. On 3/9/25 the truck wouldn’t start again and I requested for another jumpstart. The engine light came on shortly thereafter saying that the AWD wasn’t available and that the FWD train was only available. I took it in for a battery replacement and that seemed to help for a couple of months, then my headlights started going out one at a time. The passenger side bulb went out first. I replaced it with a new one at Valvoline and then the driver side bulb went out two weeks or so later and I replaced it then the check engine light came back on and I eventually had to take into the dealership for repairs and maintenance. They said they fixed it. It worked for about a 12 days and then the headlights started dimming over time as the week went on the engine light came back on and the driver side bulb was out again. So from 12/23/25 to 1/5/2026 was the length of time the truck worked but still poorly performance wise. The gas goes very quickly still and I have to fill it way too often now in its condition. I’ve spent about $5400.00 in total with trying to repair and keep gasoline in it to work. I’m taking it back to the dealership today after reporting this to NHTSA.
NHTSA ODI #11708766
Mileage unknown · Mar 5, 2025
Power Train
shudder in the torque converter of certain 2013–2018 Toyota RAV4 models. The shudder could occur while driving at light throttle between 25–50 miles per hour.
NHTSA ODI #11646411
Mileage unknown · Apr 23, 2024
Power Train
While driving around 60 mph the engine suddenly started jumping revs and would not catch back into gear. Turned engine off and on and vehicle would shift normally from 1-3 but would not go into 4-6 gear. Had to place transmission in manual mode and select gear 3 to drive home. Brought to a local transmission shop and was told it…
Read full complaint
While driving around 60 mph the engine suddenly started jumping revs and would not catch back into gear. Turned engine off and on and vehicle would shift normally from 1-3 but would not go into 4-6 gear. Had to place transmission in manual mode and select gear 3 to drive home. Brought to a local transmission shop and was told it was the torque converter. This issue also cause the check engine light, TSC light to come on. It was also throwing codes for faulty shift solonoids.
NHTSA ODI #11584752
Mileage unknown · Feb 15, 2024
Power Train
Delayed/harsh shifting when accelerating or maintaining speeds of 60 - 70 mph. Shuddering sporadically when RPMs are between 2000 - 3000. Marysville Toyota of Washington reproduced and confirmed the issue noted above. They diagnosed the vehicle with a failed Torque Converter. No warning light have come on and the dealership…
Read full complaint
Delayed/harsh shifting when accelerating or maintaining speeds of 60 - 70 mph. Shuddering sporadically when RPMs are between 2000 - 3000. Marysville Toyota of Washington reproduced and confirmed the issue noted above. They diagnosed the vehicle with a failed Torque Converter. No warning light have come on and the dealership was made aware of this as well. Due to no warning lights, it came as a surprise when the vehicle jolted. I was on the highway maintaining speed when all of a sudden there was a delay and the vehicle began to reduce speed then after 20 - 30 seconds the vehicle forced itself over 3000 RPM and began to regain speed. As the vehicle would suddenly reduce speed without warning I utilized the right lane until I was able to exit from the highway as I was becoming a hazard on the road due to the issuing my vehicle was having.
NHTSA ODI #11572248
Mileage unknown · Dec 10, 2023
Electrical SystemPower TrainService BrakesCrash
While exiting slowly from the parking lot, the Toyota started to make a beeping alarm noise, then suddenly lurched forward. Applying the brake had no effect, and the car accelerated across the LRT tracks, climbed onto the passenger platform, and only stopped when it collided with an electrical box there.
NHTSA ODI #11559394
Mileage unknown · Feb 14, 2021
Power TrainUnknown Or Other
IT SAYS IS SOMETHING WRONG WITH THE ECO OR PCM
NHTSA ODI #11396199
130,000 miles · Jul 8, 2020
Power Train
TL* THE CONTACT OWNS A 2016 TOYOTA RAV4. THE CONTACT STATED THAT WHILE DRIVING AT VARIOUS SPEEDS, BETWEEN 2,000-3,000 RPM, THE VEHICLE JOLTED BACKWARD AND STALLED WITHOUT WARNING. THE VEHICLE SHUDDERED AND THE BRAKE PEDAL WAS DEPRESSED TO REGAIN CONTROL OF THE VEHICLE. THE CONTACT TOOK THE VEHICLE TO JACK TAYLOR'S ALEXANDRIA TOY…
Read full complaint
TL* THE CONTACT OWNS A 2016 TOYOTA RAV4. THE CONTACT STATED THAT WHILE DRIVING AT VARIOUS SPEEDS, BETWEEN 2,000-3,000 RPM, THE VEHICLE JOLTED BACKWARD AND STALLED WITHOUT WARNING. THE VEHICLE SHUDDERED AND THE BRAKE PEDAL WAS DEPRESSED TO REGAIN CONTROL OF THE VEHICLE. THE CONTACT TOOK THE VEHICLE TO JACK TAYLOR'S ALEXANDRIA TOYOTA (3750 RICHMOND HWY, ALEXANDRIA, VA 22305) WHERE A DIAGNOSTIC TEST WAS PERFORMED. THE CONTACT WAS INFORMED THAT THE DEFECT WAS RELATED TO THE TORQUE CONVERTER. THE CONTACT WAS INFORMED THAT THE TORQUE CONVERTER NEEDED TO BE REPLACED, AND WAS GIVEN AN ESTIMATE FOR THE REPAIR. THE MANUFACTURER HAD YET TO BE NOTIFIED OF THE FAILURE. THE VEHICLE HAD YET TO BE REPAIRED. THE FAILURE MILEAGE WAS 130,000.
NHTSA ODI #11338271
30,000 miles · Feb 1, 2019
Power Train
I HAVE PROBLEM WITH CV JOINT LESS 30,000 MILES, TOYOTA TELL ME EVERYTHING IS GOOD WITH THE SUV, BUT HAVE SOME NOISE, NOW DON'T HAVE GOOD STABILITY WHEN A DRIVE
NHTSA ODI #11173443
9,000 miles · Nov 28, 2016
Power Train
I HAVE NOTICED THAT WHEN SHIFTING FROM REVERSE INTO DRIVE THE TRANSMISSION CAN TAKE 2-3 SECONDS TO ACTUALLY "SHIFT" INTO THE DRIVE GEAR AND HAVE THE GAS PEDAL MOVE CAR FORWARD. DURING THE 2-3 SECONDS, PRESSING THE GAS DOES NOTHING BUT REV/INCREASE THE RPM IN THE ENGINE. IF YOU DO PRESS THE GAS AND THE "SHIFT" TAKES PLACE IT WILL…
Read full complaint
I HAVE NOTICED THAT WHEN SHIFTING FROM REVERSE INTO DRIVE THE TRANSMISSION CAN TAKE 2-3 SECONDS TO ACTUALLY "SHIFT" INTO THE DRIVE GEAR AND HAVE THE GAS PEDAL MOVE CAR FORWARD. DURING THE 2-3 SECONDS, PRESSING THE GAS DOES NOTHING BUT REV/INCREASE THE RPM IN THE ENGINE. IF YOU DO PRESS THE GAS AND THE "SHIFT" TAKES PLACE IT WILL JERK THE VEHICLE FORWARD A BIT.
NHTSA ODI #10928394
Mileage unknown · Sep 29, 2016
Power Train
VEHICLE HAS WHISTLE OR WHINING NOISE ON ACCELERATION AT 55-70 MPH. (PREVIOUSLY THE VEHICLE MADE THIS NOISE AT LOWER SPEEDS AND THE TRANSMISSION WAS REPLACED (REPAIR ORDER WAS OPENED ON 6/1 AND CLOSED ON 6/9/2016). AS STATED ABOVE THE VEHICLE NOW WHINES/WHISTLES AT 55-70 MPH. APPARENTLY REPLACING THE TRANSMISSION DID NOT RESOL…
Read full complaint
VEHICLE HAS WHISTLE OR WHINING NOISE ON ACCELERATION AT 55-70 MPH. (PREVIOUSLY THE VEHICLE MADE THIS NOISE AT LOWER SPEEDS AND THE TRANSMISSION WAS REPLACED (REPAIR ORDER WAS OPENED ON 6/1 AND CLOSED ON 6/9/2016). AS STATED ABOVE THE VEHICLE NOW WHINES/WHISTLES AT 55-70 MPH. APPARENTLY REPLACING THE TRANSMISSION DID NOT RESOLVE THE ISSUE.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2013-2018 RAV4 vehicles. Certain replacement 12-volt batteries may not fit properly in the battery tray, allowing the battery to move and contact the hold-down bracket, possibly causing a short circuit.
Consequence & remedy
Consequence: A battery short circuit increases the risk of a fire.
Remedy: Dealers will replace the battery clamp sub-assembly, battery tray, and positive terminal cover, free of charge. Owner letters were mailed December 27, 2024, to 2013-2014 RAV4 owners. Additional owner notification letters will be mailed in phases, phase 2 will begin on May 14, 2025, and phase 3 in late July 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 23TB13 and 23TA13.
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2016 Toyota Yaris, Rav4, Land Cruiser and 4Runner vehicles, and Scion FR-S, iM, and TC vehicles manufactured January 28, 2016, to March 14, 2016. The Load Carrying Capacity Modification Label may not reflect the correct added weight of the installed accessories. As a result, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims for Passenger Cars."
Consequence & remedy
Consequence: An incorrect label may result in the vehicle being overloaded, increasing the risk of a crash.
Remedy: SET will notify owners, and provide them a corrected label to be installed over the inaccurate label, free of charge. The recall began on June 3, 2016. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET16A.
Additional source detail variants (2)
Equipment:other:labels
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2016 Toyota Yaris, Rav4, Land Cruiser and 4Runner vehicles, and Scion FR-S, iM, and TC vehicles manufactured January 28, 2016, to March 14, 2016. The Load Carrying Capacity Modification Label may not reflect the correct added weight of the installed accessories. As a result, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims for Passenger Cars."
Consequence: An incorrect label may result in the vehicle being overloaded, increasing the risk of a crash.
Remedy: SET will notify owners, and provide them a corrected label to be installed over the inaccurate label, free of charge. The recall began on June 3, 2016. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET16A.
Tires
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2016 Toyota Yaris, Rav4, Land Cruiser and 4Runner vehicles, and Scion FR-S, iM, and TC vehicles manufactured January 28, 2016, to March 14, 2016. The Load Carrying Capacity Modification Label may not reflect the correct added weight of the installed accessories. As a result, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims for Passenger Cars."
Consequence: An incorrect label may result in the vehicle being overloaded, increasing the risk of a crash.
Remedy: SET will notify owners, and provide them a corrected label to be installed over the inaccurate label, free of charge. The recall began on June 3, 2016. Owners may contact SET customer service at 1-866-405-4226. SET's number for this recall is SET16A.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2016 Toyota RAV4 vehicles manufactured October 30, 2015, to February 3, 2016, 2016 Lexus RX350 vehicles manufactured October 26, 2015, to February 8, 2016, and 2016 Lexus ES350 vehicles manufactured September 1, 2015, to February 29, 2016. These vehicles are equipped with an ABS actuator that may have a damaged O-ring which could result in improper brake fluid pressure control during ABS, Traction Control, or Stability Control activation. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control Systems."
Consequence & remedy
Consequence: Insufficient brake fluid pressure may cause a loss of vehicle control, increasing the risk of a crash.
Remedy: Toyota will notify owners, and dealers will inspect the brake actuator, replacing it as necessary, free of charge. The recall began on May 4, 2016, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is G0I, GLC.
Additional source detail variants (2)
Electronic Stability Control (esc)
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2016 Toyota RAV4 vehicles manufactured October 30, 2015, to February 3, 2016, 2016 Lexus RX350 vehicles manufactured October 26, 2015, to February 8, 2016, and 2016 Lexus ES350 vehicles manufactured September 1, 2015, to February 29, 2016. These vehicles are equipped with an ABS actuator that may have a damaged O-ring which could result in improper brake fluid pressure control during ABS, Traction Control, or Stability Control activation. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control Systems."
Consequence: Insufficient brake fluid pressure may cause a loss of vehicle control, increasing the risk of a crash.
Remedy: Toyota will notify owners, and dealers will inspect the brake actuator, replacing it as necessary, free of charge. The recall began on May 4, 2016, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is G0I, GLC.
Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2016 Toyota RAV4 vehicles manufactured October 30, 2015, to February 3, 2016, 2016 Lexus RX350 vehicles manufactured October 26, 2015, to February 8, 2016, and 2016 Lexus ES350 vehicles manufactured September 1, 2015, to February 29, 2016. These vehicles are equipped with an ABS actuator that may have a damaged O-ring which could result in improper brake fluid pressure control during ABS, Traction Control, or Stability Control activation. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 126, "Electronic Stability Control Systems."
Consequence: Insufficient brake fluid pressure may cause a loss of vehicle control, increasing the risk of a crash.
Remedy: Toyota will notify owners, and dealers will inspect the brake actuator, replacing it as necessary, free of charge. The recall began on May 4, 2016, 2016. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is G0I, GLC.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
PE21005 · Battery Hold Down Bracket Thermal Events
Opened Feb 25, 2021 · Closed Aug 12, 2024
Status: closed (inferred from source dates) · Electrical SYSTEM:12V/24V/48V Battery
The Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE) to understand the contributing factors and frequency of vehicle fires originating from the battery region of the engine compartment in Model Year (MY) 2013-2018 Toyota RAV4 vehicles on 25 February 2021. At the time of opening, ODI attributed eleven allegations and additional EWR events to this PE. PE21005 focused on replacement batteries installed in the subject vehicles. No reported fire event identified in PE21005 involved the originally supplied 12V battery. The reported fires took place in vehicles known to contain aftermarket batteries or whose age exceeded the expected life of the original equipment battery. ODI identified battery dimensioning as it relates to the battery retention system (hold down bracket, radiator support bolt, J-hook, and battery tray) as the main factor set in the contact between the battery hold down bracket contacting the positive terminal of the 12V battery. The subject vehicles carried over the same battery tray and retention system from the prior generation (MY2006 – MY2012) of RAV4 vehicles. However, the subject vehicles were equipped with a dimensionally smaller battery (Group 35) than the prior generation (Group 24F). The smaller- length measurement in the Group 35 battery size in a battery tray originally designed to fit a Group 24F battery contributed to increased potential for battery movement which was exacerbated by the diversity in aftermarket battery configuration and irregularities intrinsic to battery replacement procedures. Battery movement coupled with the proximity of the B+ terminal on the battery and the grounded electrically conductive hold down bracket set the stage for a short to ground leading to an engine stall (if in operation) followed by a vehicle fire. This investigation was not able to classify the installation status, battery size, or cause of every allegation due to the fire event causing damage to the area, inaccessible vehicle, modification to the battery retention system after the event, and/or inconclusive photographic evidence. Toyota's investigation of the issue identified aftermarket battery catalogs that listed an improper battery replacement size (Group 26R) that would nevertheless fit into the subject vehicles whose battery retention system is incapable of reliably restraining a Group 26R battery. On 18 November 2021, Toyota initiated a consumer advisory campaign (21TG01) to the subject vehicle owners, notifying them of the correct size battery and offering a free inspection of the battery and retention hardware, a caution label to affix to the hold down bracket, and a discounted replacement 12V battery. This investigation with Toyota established three broad categories to characterize the battery retention system state of a given vehicle: "correct", "minor mis-installation", and "major mis-installation". - The "correct" terminology references the front bolt, bracket, and J-hook installed in a position not in contact with the positive battery terminal and the front bolt torqued to 17 Nm and the J-hook engaged with the tray hole and torqued to 4.9 Nm. - A "minor mis-installation" would describe the three retention components installed in the prescribed location, however not to the correct torque values. - The "major mis-installation" condition would constitute a retention component missing or disconnected from the system. Toyota's own testing used five exemplar batteries installed on a subject vehicle in each battery categorization resulted in: - Contact between the B+ terminal and hold down bracket in "major mis-installations" - Movement of the battery in "minor mis-installations" - No observable motion in "correct" installations. ODI conducted its own evaluation of the Toyota- specified replacement battery and 5 aftermarket Group 35 batteries. The six batteries tested conformed to the Group 35 Battery Council International (BCI) standard on overall dimensional tolerance and terminal location. That standard does not define the edge shape or material of battery casing. Physical interaction between the hold down bracket and the battery case and the friction between the casing material and the battery tray resulted in a large variability in movement forces required to incite movement when the battery was installed in the "correct" condition. Resulting in movement at an induced lateral load between 0.6 G and 1.91 G equivalent force across each battery. This force is higher than a typical vehicle could exert in a steady state turn and would only experience loads through brief shock or impulses. Multiple shock or impulse loads across time would contribute to a delay between the replacement battery installation and the fire event. Likelihood of a fire event increases as the installation method degraded from the "correct", to "minor mis-installation", and then to "major mis-installation". Protruding vent caps atop some of the batteries tested aided in restricting battery movement relative to the hold down. An absence of vent caps permitted additional movement. Following several discussions and vehicle inspections with ODI during this investigation, on 01 November 2023, Toyota filed a safety recall (NHTSA 23V-734) of 1,853,568 MY 2013 through MY 2018 Toyota RAV4 vehicles to reduce the risk of a vehicle fire with redesigned battery retention components. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Illustration