The contact owns a 2019 Toyota C-HR. The contact stated that while driving at 40 MPH, the vehicle stalled. The vehicle was sputtering while driving after 20 minutes of driving. Their vehicle failed to accelerate. There were no warning lights illuminated. The local dealer was contacted, who confirmed there was no recall coverage.…
Read full complaint
The contact owns a 2019 Toyota C-HR. The contact stated that while driving at 40 MPH, the vehicle stalled. The vehicle was sputtering while driving after 20 minutes of driving. Their vehicle failed to accelerate. There were no warning lights illuminated. The local dealer was contacted, who confirmed there was no recall coverage. The vehicle was diagnosed, and it was determined that the failure was due to the fuel pump. The vehicle was not repaired. An independent mechanic was contacted, who determined the failure was due to the fuel pump. The manufacturer was contacted, who referred him to the NHTSA hotline. The failure mileage was approximately 39,000.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019-2020 C-HR and 2020 Corolla and Corolla Hybrid vehicles equipped with rear seat belt assemblies with a dual-mode locking mechanism. The seat belt webbing sensor locking mechanism may not lock as intended.
Consequence & remedy
Consequence: In the event of a crash involving multiple impacts, the seat belt may not properly restrain the occupant, increasing the risk of injury.
Remedy: Toyota will notify owners, and dealers will inspect the rear seat belt assembly production dates, and replace the assemblies, as necessary, free of charge. The recall began February 7, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are 19TB22 and 19TA22.
Additional source detail variants (2)
Seat Belts: Rear/other:buckle Assembly
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019-2020 C-HR and 2020 Corolla and Corolla Hybrid vehicles equipped with rear seat belt assemblies with a dual-mode locking mechanism. The seat belt webbing sensor locking mechanism may not lock as intended.
Consequence: In the event of a crash involving multiple impacts, the seat belt may not properly restrain the occupant, increasing the risk of injury.
Remedy: Toyota will notify owners, and dealers will inspect the rear seat belt assembly production dates, and replace the assemblies, as necessary, free of charge. The recall began February 7, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are 19TB22 and 19TA22.
Seat Belts:rear/other
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019-2020 C-HR and 2020 Corolla and Corolla Hybrid vehicles equipped with rear seat belt assemblies with a dual-mode locking mechanism. The seat belt webbing sensor locking mechanism may not lock as intended.
Consequence: In the event of a crash involving multiple impacts, the seat belt may not properly restrain the occupant, increasing the risk of injury.
Remedy: Toyota will notify owners, and dealers will inspect the rear seat belt assembly production dates, and replace the assemblies, as necessary, free of charge. The recall began February 7, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are 19TB22 and 19TA22.
Gulf States Toyota (GST) is recalling certain 2019 C-HR, 4Runner, Avalon, Avalon Hybrid, Camry, Camry Hybrid, Highlander, Land Cruiser, Prius, RAV4, Sequoia, Tacoma, Sienna, Tundra and Yaris vehicles. The text on the load capacity label may become illegible. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: If the driver cannot read the label, they may unknowingly overload the vehicle, increasing the risk of a crash.
Remedy: GST will notify owners, and dealers will provide corrected load carrying capacity modification labels, free of charge. The recall began May 24, 2019. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 19R1.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2019 Toyota C-HR vehicles. The rear axle hub bearing bolts may have been insufficiently tightened, causing the bolts to loosen and damage the rear brake components or cause a rear wheel to detach.
Consequence & remedy
Consequence: If the bolts loosen and damage the rear brake components, or cause a rear wheel to detach, it would increase the risk of a crash.
Remedy: Toyota will notify owners, and dealers will inspect the rear axle hub bearing bolts. If a bolt is found to be loose or detached, the dealer will replace the rear axle hub bearing assembly and rear axle carrier sub-assembly, free of charge. The recall began November 6, 2018. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0Y.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
2019 Toyota C-HR Problems, Complaints & Recalls | Skip That Year
Illustration