1991 Toyota 4RUNNER

BACK IN AUGUST 2016 I PURCHASED AND INSTALLED 4 NEW TIRES, I CLEANED AND PAINTED WHEELS BEFORE INSTALLING 4 NEW SLIME TIRE VALVES #TR 415 SLIME PART# 20261 I PURCHASED THESE VALVES AT WALMART IN SOMERSET, KY THE DATE CODE ON PACKAGE WAS 08.26.14 I PURCHASED (8) PACKS 16 TOTAL VALVES ( I STILL HAVE 3 PACKS THAT I HAVE NOT OPENED). I HAVE A TIRE CHANGER ON MY FARM AND DO MY OWN TIRE SERVICE. ON 09-26-2017 I HAD A TIRE FAILURE ON MY TOYOTA WHILE DRIVING NOTICE SLIGHT PULL. AFTER STOPPING AND INSTALLING SPARE I DETERMINED THAT ALL 4 VALVES I PUT ON LAST YEAR WERE DRY ROTTED (CRACKED). I KEEP THIS VEHICLE IN BARN WHEN NOT BEING DRIVEN (NO SUN DAMAGE SHOULD OCCURED. I CHECKED A TRAILER THAT I HAD APPLIED NEW VALVES ON FROM THE SAME LOT OF VALVES, THEY TO WERE DRY ROTTED AND ONE WAS FLAT. THESE PRODUCTS ARE DANGEROUS TO USE, THE VALVES WILL PULL APART WITH LIGHT PULLING FROM FINGERS. THESE PRODUCTS NEED TO BE RECALLED. I DID NOT CONTACT WALMART ABOUT THIS FAILURE DUE TO PRODUCT PURCHASED FROM THEM NOT MADE BY THEM! I DID CONTACT SLIME.COM WITH NO REPLY BACK AS OF 09-27-2017.

OEM STANDARD TIRES ARE 225/75R15 ON TOYOTA STEEL WHEELS. OEM FACTORY OPTION TIRES ARE W/31X10.5 ON TOYOTA BRAND ALUMINUM WHEELS. THE FACTORY OFFICIAL STICKER SHOWS THE OPTION TIRES AS FACTORY-INSTALLED. THE DRIVER DOOR PILLAR STICKER SHOWS THE FACTORY-INSTALLED TIRE AS 225/75R15. THE PILLAR STICKER IS WRONG DUE TO DEFECT IN THE MANUFACTURING PROCESS. IN RELIANCE ON THE PILLAR STICKER, A TIRE TECHNICIAN INSTALLED REPLACEMENT TIRES BASED ON THE STANDARD SIZE. THE STANDARD TIRE IS SIGNIFICANTLY SMALLER IN DIAMETER THAN THE FACTORY OPTION TIRE. SAFETY ISSUES: 1) SPEEDOMETER ERROR ~10%, CAUSING MISMATCH TO POSTED LIMIT AND FORESEEABLE TAILGATING AND OTHER ADVERSE BEHAVIORS BY SURROUNDING DRIVERS; 2) DEGRADED STABILITY ON HIGH-CENTER OF GRAVITY SUV DUE TO MISMATCH BETWEEN FACTORY OPTION SPARE TIRE AND REPLACEMENT TIRES BASED ON ERRONEOUS PILLAR STICKER. *TR