2014 Hyundai Veloster

The contact owns a 2014 Hyundai Veloster. The contact stated that while driving at an undisclosed speed and attempting to accelerate, the vehicle failed to accelerate above 50 MPH. The check engine warning light was illuminated. The vehicle was taken to the dealer, who determined that the vehicle required an engine fluid flush. The vehicle was repaired, but the failure reoccurred. The vehicle was taken back to the dealer, who was unable to duplicate the failure. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 135,000.

The contact owns a 2014 Hyundai Veloster. The contact stated while driving at an undisclosed speed, the contact noticed an extremely loud knocking sound coming from the vehicle which increased louder while driving. The contact drove the vehicle to the shoulder of the road. The vehicle was towed to an independent mechanic however, the vehicle was not diagnosed or repaired. The vehicle was taken to another independent mechanic where it was diagnosed with engine failure. The contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 98,000.

The car lost power gradually ;when I was driving ; We were on the freeway and I couldn’t continue driving 60 miles per hour , therefore I turned on the turn signals cause I just could drive at 35 miles per hour and the car just start shaking ; I just look for the next exit by the time We were on risk on the emergency lane for along time cause the next exit was to far from there .and the car was too slow ,when we finally got exit I call and I stop my car and call the mechanic to ask for help and he help me plug in the scanner machine to my car and there was a problem with some cylinders and one valve and I decided to called to the dealer to get an appointment:. My Vehicule already was checking for Hyundai but they just text me a message ; they said my car needs to replace a motor ,turbo ; some broken valves causing zero pounds of compression on cylinder 4-long block repair-new intake and exhaust manifolds (including turbo)required due to broken valve sending metal through the entire system -quote long block/intake and exhaust manifolds /turbo /all necessary gaskets and fluids for repair : I just was noted my car was consuming too much oil, cause the car board showed me 3 weeks ago and I need to add oil ,and the mechanic plugged in the scanner; but it doesn’t showed something else ;therefore 3 weeks ago I added 1/4 or more ; then was 2 week ago; I added 1/4 of oil again and then just last week I added 1/4 or more oil again ;I just was checking the oil constantly.; and it should be noted that the car was not leaking oil but I didn’t understand why it was running out so quickly .

The contact owns a 2014 Hyundai Veloster. The contact stated while driving at an undisclosed speed and coming to a stop light, the vehicle lost motive power with the check engine warning light illuminated. The vehicle was towed to the dealer but was not diagnosed or repaired. The dealer stated that no failures were found after the vehicle was inspected. The contact also stated that the vehicle was consuming an excessive amount of engine oil. The manufacturer was notified of the failure. The failure mileage was approximately 89,000.

Engine started knocking at 117,xxx miles with oil changes less then 5,000 miles. Dealership acknowledged and confirmed that the rod bearings were bad. If requested could remove the rod bearings. Dealership and corporate Hyundai acknowledged the problem, but would not help cover any of the costs. The vehicle was also losing around 1 quart for every 1,000 miles which was not addressed by the dealer. This is a huge safety risk, if the bearing completely failed the vehicle would have stalled on the interstate. No check engine light is present or was present. The issues with the Veloster Turbo is well know and document from 2012-2017 regarding the failure of rod bearings prematurely. Other Kia and Hyundai vehicles have recalls for this same problem, unfortunately the Veloster does not.

There is a current recall since September, 2023, with no remedy to date. In addition, I have driven this vehicle very little after last having my car serviced at the dealership, just over a year now, which seemed to not be sounding right in the engine, so it alarmed me, and all started feeling overwhelming since going to the dealership for repairs. I see there is an engine recall on the 2015 Veloster, though not the 2014? Yet they are claiming that both issues can cause fires. My vehicle has less than 100K miles if I remember correct from when I last looked. it's been months since I've even driven the vehicle, as I've not felt safe or comfortable doing so. My vehicle seems to have a lot of the same symptoms as the 2015 Veloster recall. i have been nervous to take it back to the same dealer, though I've also been too nervous to let just any mechanic look at it. When the dealer last changed my oil, a bunch leaked out in my driveway, and I was told there's a safety overflow. In addition, my oil light came on, and I was simply told they forgot to reset it.

The contact owns a 2014 Hyundai Veloster. The contact stated that while driving approximately 50 MHP, there was a loud knocking sound coming from the engine compartment before the vehicle lost motive power and stalled. The vehicle was towed to the local dealer who diagnosed that the engine had failed and needed to be replaced. The vehicle was not yet repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was 94,000.