2023 Hyundai Tucson

When I push the brake and push start button at the same time to start the vehicle, it will appear as if it is fully started. It is not until I put the vehicle in reverse that I notice the vehicle is not fully started. This happens on cold or hot starts and anytime of the day sometimes multiple times a day. The battery, malfunction indicator light, immobilizer, and engine oil pressure lights/lamps are on.The service department advisor did say my vehicle replicated but the vehicle was not hooked up to reader at the time. After that no service technician has been able to reproduce the problem. The vehicle has been to the dealership on 3 different occasions and I have provided them with a video.

I was driving on the highway at 60/70 mph and there was nothing in front of my car. The brakes went on for a second stopping the car abruptly and I swerved. This happened once more. It then happened another time on a turn as I tried to regain control of the car it swerved from side to side and almost got into an accident or spun out.

The contact owns a 2023 Hyundai Tucson. The contact stated while driving at 55 MPH with the cruise control activated, the Forward Collision Avoidance Warning system activated, and the vehicle inadvertently applied the automatic braking before releasing. The contact stated no other vehicles or objects were nearby. The Forward Collision Avoidance warning light was illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 2,000.

The contact owns a 2023 Hyundai Tucson. The contact received notification of NHTSA Campaign Number: 23V526000 (Power Train) however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

The contact owns a 2023 Hyundai Tucson. The contact stated while driving at an undisclosed speed, the ABS, check engine, low oil pressure, and Forward Collision Avoidance warning lights illuminated. The vehicle was taken to the dealer but was not yet diagnosed. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 6,200.

When driving the car and stopping at red lights, stop signs, or any other stops in traffic on roads and expressways, the car engine randomly dies and cannot restart between 3 and 10 mins. There is no warning when this is about to happen – the car engine simply dies and dashboard lights come on. There is no response from the car after shifting in Neutral or Park by pressing the start button with foot on brake. After some amount of time, the car will start. There is no warning before this is going to happen. The dealer (Patrick Hyundai) has inspected the car three times and has not been able to reproduce the problem as this happens randomly. They told me on my third visit to not bring the car back as they don't know what the problem is. The first time this happened was 4 months after I owned the car and has happened in excess of 6 times I now fear for my life when I drive this car. I was almost hit twice. I was stopped on a busy main street at a red light when the light turned green and all cars drove away and the truck approaching me assumed I would drive also but couldn’t because the car was stalled in the middle of the road. The truck veered away as last second to avoid my stationary car. The 2nd time was on expressway during traffic when stop and go driving was occurring and my car engine died again. As in previous case, vehicle behind me anticipated I would move forward like other cars but couldn’t and stopped inches from back bumper.

I was driving at normal speed and all of a sudden the vehicle accelerated to a high speed. Took to dealer with all the other issues and they could not create the problem. They are trying to blame it on me for have two sets of mats. Also navigation unit is not the correct unit in car. When I apply the brake to stop it seems as if the frame is creaking.

This is copy and pasted from your site. Hyundai does not have a recall ready, so I am filing a complaint. Is this the correct action? THE TRANSMISSION ELECTRIC OIL PUMP FOR THE IDLE STOP & GO SYSTEM (ISG) IN THE SUBJECT VEHICLES MIGHT HAVE BEEN ASSEMBLED WITH PRINTED CIRCUIT BOARDS (PCB) THAT WERE DAMAGED DURING MANUFACTURING BY THE OIL PUMP CONTROLLER SUPPLIER. A DAMAGED CAPACITOR ON THE PUMP CONTROLLER PCB COULD IMPACT ELECTRICAL OPERATION LEADING TO HEAT DAMAGE TO THE ELECTRIC OIL PUMP CIRCUIT BOARD, CONNECTOR, AND WIRING HARNESS. THE HEAT DAMAGE AT THE PUMP INCREASES THE RISK OF A VEHICLE FIRE IN ADDITION TO A POTENTIAL CONTROLLER AREA NETWORK (CAN) COMMUNICATION DISRUPTION FOR MULTIPLE ONBOARD CONTROLLERS. Thanks for your time.

The contact owns a 2023 Hyundai Tucson. The contact stated while driving 45 MPH, the oil warning light illuminated. The contact pulled over and checked the oil level and became aware that there was no oil in the engine. The contact added oil however, the failure recurred. The vehicle was towed to the dealer and the dealer confirmed that there was no oil in the engine however, the cause of the failure was not found. The vehicle was not repaired. The manufacturer was contacted and stated that an oil consumption test needed to be performed. The failure mileage was 49,000.