2024 Hyundai Santa Fe

I purchased my new vehicle in June or July of 2024. I had to replace my windshield on September 26, 2024, then again on December 13, 2025 due to a crack. I recently have received another chip in my windshield on or about March 18, 2026. I am unsure whether all of these were due to rocks, but it seems unbelievable that a windshield would need to be replaced so often. I have safety concerns that the windshield is easily breakable and if it were in a crash, what would happen. I also had to pay $100 each replacement and now my insurance is going up because of these claims.

2024 Hyundai Santa Fe purchased new in May 2024. On three occasions since December 2025, while driving, the dashboard went completely black as if the vehicle shut off. The Hyundai startup logo then reappeared while the vehicle was still moving, and the vehicle lost acceleration. The most recent event occurred at highway speed, approximately 65-70 mph, requiring us to coast to the shoulder. No warning lights appeared before the event. A video of the most recent incident is available. Dealer inspected vehicle but could not duplicate the problem and reported no error codes.

This is related to the recent issue with a '26 Palisade Calligraphy and the stop sale due to the 2nd row seat killing a [XXX] . I just went out and tried this on my ’24 Santa Fe Calligraphy with the 2nd row captains chairs and the electric button on the top of the seat. First off, if the seatbelt is secured, the button is disabled. Our rear facing car seat is a Britax click tight which uses the seatbelt to secure it. If the seatbelt is not secured, the button works. I sat in the seat (adult male), reached back and pushed button, and the seat started to compress me while sitting in it. Once I started to resist, the seat stopped, but it did not back off. I had to use more pressure than expected. I had to reach back and push the button again to get out. I did the same test again this time using my arm and I had to put moderate pressure to get the seat to stop. More pressure than I expected was required. I don’t know many details on the tragic death of the [XXX] old but I believe they were in a rear facing car seat that was not using the seat belt and instead using the latch connectors to secure it to the seat. This means the button in the Palisade was operable (assuming it’s like the Santa Fe) and I can totally see the seat back coming down onto the rear facing toddler. Whatever fix Hyundai does for the Palisade needs to be done on the Santa Fe as well as it is dangerous for small kids with how it works currently. There has to be a way to detect pressure on the seat and render the button inoperable just like when the seatbelt is secured. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

A child was exiting the vehicle from the second row driver-side seat, and the seat fold-up button (on the shoulder of the seat) was accidentally tapped. The seat began to tilt forward to collapse, squeezing a toddler in a rear facing child seat between the seat and the back of the front driver seat. Thankfully, the child seat bore the brunt of the pressure, but the incident clearly demonstrated an absence of sensors or logic to disallow the button to function when a child seat (using latch) is installed. We then tested the passenger seat in the second row and found that, even if a seat occupant is present, if the seatbelt is not buckled, the button WILL continue to operate and crush the passenger. That is to say the collapse function of the seat is uninhibited by the weight or resistance of a seated passenger. This is especially alarming given our elementary age children enter and exit the car on their own with little assistance requested from us.

When making a right turn from a complete stop, the vehicle intermittently exhibits noticeable hesitation and reduced acceleration compared to normal straight-line launches. This has occurred approximately 5–6 times. The delay in power delivery creates an unsafe condition when merging from on-ramps into higher-speed traffic, as the vehicle does not accelerate as expected. This mismatch between expected and actual acceleration can lead to misjudgment of traffic gaps. No warning lights or diagnostic messages have appeared. The issue appears intermittently and specifically during right-turn launches from a stop.

What component or system failed or malfunctioned, and is it available for inspection upon request? Unsure, but likely transmission. I no longer own the vehicle, it is at Tom Ahl Hyundai in Lima, Ohio. How was your safety or the safety of others put at risk? When the vehicle was put in reverse, without pressing the gas the car would rapidly accelerate and jerk as if it was going to stall. Has the problem been reproduced or confirmed by a dealer or independent service center? Yes, the dealership. Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? The manufacturer was working on a fix but unable to figure out the issue, so I returned the car. Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? No, no warning lights.

Auto dimming headlights. The headlights have stopped auto dimming. I feel like this is a safety issue because if you have them on you have to push the switch forward and then pull backward to change them back to dim. It is not something that happens occasionally it is every time they are on. Not only is it dangerous for me but also on coming vehicles. I have taken it to the dealer and was told they were waiting on some way to test what the problem is.

Both driver and front passenger seat belts are nearly impossible to snap it and it is just as hard to get them to release. Sometimes you think it is snapped together and it comes out going down the road. I have taken it to the dealer and they said the parts are on back order and have been for a long time. This is a serious safety issue. It looks to me like they would be on top of something like this. If there is an accident I don't trust the seat belts to protect me and my family. It has not been listed as a recall yet so I do not understand why they would be on back order for so long.