I was driving along I-20/59 Northbound approaching Bessemer, Al near or between mile marker 102-104. Suddenly I heard a “pop” sound coming from behind me and noticed in my rear view mirror the rear windshield had a small hole in it. I had just merged into the far left passing lane when this occurred and then proceeded to merge t…
Read full complaint
I was driving along I-20/59 Northbound approaching Bessemer, Al near or between mile marker 102-104. Suddenly I heard a “pop” sound coming from behind me and noticed in my rear view mirror the rear windshield had a small hole in it. I had just merged into the far left passing lane when this occurred and then proceeded to merge to exit onto Exit 104 (McAshan Dr./ McCalla). As I continued to drive glass began to shatter and the hole expanded. I was initially startled and afraid because I didn’t know what was happening. Once I exited, I parked at the Flying J truck stop and exited the vehicle to further assess. I called my parents and then a Bessemer Police officer to file a report. I’m not certain if something hit my windshield, if this is the result of a manufacturing malfunction, or other unknown occurrence due to external factors.
NHTSA ODI #11733477
32,000 miles · Apr 9, 2026
Structure
The contact owns a 2023 Honda CR-V. The contact stated that while driving at an undisclosed speed, the vehicle suddenly started to shudder abnormally. No warning light was illuminated. The vehicle was taken to a local dealer, where it was diagnosed and determined that the hood needed to be replaced. The vehicle was not repaired …
Read full complaint
The contact owns a 2023 Honda CR-V. The contact stated that while driving at an undisclosed speed, the vehicle suddenly started to shudder abnormally. No warning light was illuminated. The vehicle was taken to a local dealer, where it was diagnosed and determined that the hood needed to be replaced. The vehicle was not repaired due to the cost. The manufacturer was made aware of the failure. The failure mileage was approximately 32,000.
NHTSA ODI #11730180
Mileage unknown · Jan 26, 2026
Air BagsService BrakesStructure
no problem
NHTSA ODI #11713308
Mileage unknown · Jan 26, 2026
Air BagsService BrakesStructure
thank you
NHTSA ODI #11713305
Mileage unknown · Aug 1, 2025
Structure
Hood wobbles crazy while driving highway speed as if it is going to open or come out. Seem the outer panel of hood has rust by the joints where it is joined to the inner panel of the hood. Almost all the joints seem to be not joined well together. This is a structural body issue, car is less than 3 years old. And Currently I hav…
Read full complaint
Hood wobbles crazy while driving highway speed as if it is going to open or come out. Seem the outer panel of hood has rust by the joints where it is joined to the inner panel of the hood. Almost all the joints seem to be not joined well together. This is a structural body issue, car is less than 3 years old. And Currently I have about 55K miles on it. Noticed the hood wobble when it had less than 30,000 miles but upon checking under the hood there were no visible signs of defect. But recently(51K mile roughly) after a car wash I opened the hood to see the inside of the car, that's when I noticed that the hood inner joints have rust and are not joint together properly with inner panel of the hood. Reached out to the dealership but they deny to fix this as it has been more than 36000 miles. At the dealership there was another person with 2025 Honda crv, I checked with the owner to let me see if his car had similar issue or not. Upon checking the hood his car's one of the joint was loose ( given that car is less than an year old so there was no rust.) Seems Honda is used some adhesive to stick the metal panels of the hood together which start to deteriorate over time. There are many crv owners who are having similar issue but the dealership resolves the issue for them given that they have less than 36000 miles on it. Honda does have "Rust Perforation Limited warranty" which is valid until 5 years, But for them to fix the car there has to be rust perforation aka hole in the panel inside out to fix it. Does this mean I have to wait for another 2 years and 5 months for the rust to progress and cause a hole in the panel inside out?? What if i start seeing the rust perforation right after 5 years. Honda will fix this for me or I have to pay out of my pocket to get it fixed. Also my car has never been in any kind of accident, it has the panel which came from the Honda Factory. Also it is not a flood vehicle either for it to start getting rust. Please see attached pics.
NHTSA ODI #11677800
Mileage unknown · Apr 24, 2025
Structure
LEFT SIDE (DRIVERS SIDE) MIRROR VIBRATES AT HIGH SPEEDS. THIS CREATES A DISTORTION WITH THE INABILITY TO SAFELY JUDGE DISTANCES FROM OTHER CARS, ANY OBJECTS NEAR BY, MAKES ATTEMPTS AT LANE CHANGES UNSAFE.
NHTSA ODI #11656650
Mileage unknown · Apr 10, 2025
Structure
The hood seems to wobble/shake during highway speeds. Very noticeable when wind speed is high. Seems to be a common problem with 2023 CRv Hybrids. There should be a recall to have hoods fixed since this is a major safety problem.
NHTSA ODI #11653883
Mileage unknown · Mar 4, 2025
SteeringStructureUnknown Or Other
I was in the collision accident on the service road when my new Honda CR-V 2023 started skidding to the left while I was making the smooth turn to the right, the vehicle was pulling to the left side of the road, hitting the metal guardrail on the driver side. Looked like I lost traction and skid from left then to the right , un…
Read full complaint
I was in the collision accident on the service road when my new Honda CR-V 2023 started skidding to the left while I was making the smooth turn to the right, the vehicle was pulling to the left side of the road, hitting the metal guardrail on the driver side. Looked like I lost traction and skid from left then to the right , unable to control and maneuver the steering wheel. The vehicle was in steering recall but I was not aware of that, did not receive any notice of the recall. If this accident had never happened I probably would continue driving the unsafe vehicle and be more in a severe crash. The vehicle' steering column did not work and the vehicle was not drivable after the accident, and was towed to the car repair shop. I immediately notified the State Farm insurance about the collision but nobody told me I had to call the police.
NHTSA ODI #11646380
Mileage unknown · Dec 30, 2024
Structure
Driver side mirror cracked vertically. Honda says it is "weather related" because I told them it happened while I was driving in snow. It is not covered under warranty. This is a safety issue!
NHTSA ODI #11633242
Mileage unknown · Sep 7, 2024
Structure
At high speeds, hood vibrates and moves abnormally up and down. The hood wobbles at highway or interstate speeds
Honda (American Honda Motor Co.) is recalling certain 2023-2025 Acura Integra, Civic Type R, CR-V Hybrid, CR-V, HR-V, 2022-2025 Civic, Civic Hatchback, 2024-2025 Acura Integra Type S, 2025 CR-V Fuel Cell EV, Civic Hybrid, and Civic Hatchback Hybrid vehicles. The steering gearbox assembly may have been manufactured incorrectly, which can cause excessive internal friction and lead to difficulty steering the vehicle.
Consequence & remedy
Consequence: Difficulty steering can increase the risk of a crash.
Remedy: Dealers will replace the worm gear spring and redistribute or add grease as necessary, free of charge. Owner notification letters were mailed November 18, 2024. Owners may contact Honda Customer Service at 1-888-234-2138. Honda's numbers for this recall are SJS, MJU, QJT and VJV.
Honda (American Honda Motor Co.) is recalling certain 2013-2023 Honda Accord, Civic Coupe, Civic Sedan, Civic Hatchback, Civic Type R, CR-V, HR-V, Ridgeline, Odyssey, Acura ILX, MDX, MDX Hybrid, RDX, RLX, TLX, 2019-2022 Honda Insight, Passport, 2020 Honda CR-V Hybrid, 2018-2019 Honda Clarity PHEV, Fit, and 2015-2020 Honda Accord Hybrid, Pilot, Acura NSX vehicles. The fuel pump inside the fuel tank may fail.
Consequence & remedy
Consequence: Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.
Remedy: Dealers will replace the fuel pump module, free of charge. Owner letters were mailed September 6, 2024. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KGC and KGD. This recall is an expansion of NHTSA recall numbers 21V-215 and 20V-314.
Honda (American Honda Motor Co.) is recalling certain 2023 CR-V vehicles. The front passenger seat back frame may not have been welded properly, which can cause the seat back position to fail in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 207, "Seating Systems" and 201, "Occupant Protection in Interior Impact."
Consequence & remedy
Consequence: A seat back position that fails may not adequately restrain the occupant during a crash, increasing the risk of injury.
Remedy: Dealers will replace the front passenger seat back frame assembly, free of charge. Owner notification letters were mailed March 27, 2023. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is 6PK.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
EA23003 · Momentary Increased Steering Effort
Opened Nov 29, 2023 · Closed Jan 28, 2025
Status: closed (inferred from source dates) · Steering
On November 29, 2023, the Office of Defects Investigation (ODI) opened this Engineering Analysis (EA23003) to assess allegations of momentary increase in steering effort in model years (MY) 2022-2023 Honda Civic, 2023MY Honda CR-V, and 2023MY Acura Integra vehicles (subject vehicles). The complaints received by ODI alleged that the subject vehicles experienced a momentary increase in required steering effort (described as “sticky steering”) occurring mostly at highway speeds after driving for an extended amount of time; these complaints could not be duplicated during dealer service technicians’ quick test drives. The complaints had been received over the previous two years with most occurring with low vehicle mileage. The steering gear of these vehicles is aided by an electrical power assist unit. This power assist unit inputs force on the steering rack via a worm gear and worm wheel assembly. During PE23005, Honda stated this condition of momentary increase in steering effort occurs due to two factors within this power assist unit. First, during manufacturing, the steering worm wheel goes through annealing and component conditioning processes. These processes cause internal stress and strain within the steering worm wheel. This strain is slowly released over the first few months of the vehicle life. Over time, the released strain causes deformation of the teeth on the worm wheel, causing the worm gear to catch on the worm wheel. This catching results in the driver’s momentary increased steering effort. Second, the manufacturing process did not guarantee consistent grease application and, therefore, some subject vehicles received insufficient grease which contributed to the momentary increase in steering effort. During EA23003, ODI further analyzed the potential safety related consequences of the momentary increase in steering effort. NHTSA’s Vehicle Research and Test Center (VRTC) duplicated the allegations of increased steering effort. In addition, VRTC discovered the steering worm wheel and worm gear tended to push grease out of the meshing area, resulting in large amounts of grease resting on top of the worm wheel. Information Request responses collected and reviewed by ODI showed Honda had also discovered this additional root cause during NHTSA’s EA. In addition, Honda discovered the preload of the worm wheel gear spring was set too high, increasing the gear slide load and resulting in higher friction and increased torque fluctuation when steering. The number of consumer complaints made to ODI continued to increase with the expansion of scope from the PE to the EA. Additionally, during EA23003, ODI received ten complaints alleging a crash, in addition to the 13 complaints ODI had received as of the time it opened EA23003. In total, 23 crashes have been reported to ODI due to this alleged defect. On October 3, 2024, Honda filed NHTSA Recall No. 24V-744 to address this defect. The recall will provide consumers with a new steering worm wheel gear spring with a decreased load. Additionally, dealerships will add additional grease and relocate any grease sitting on top of the worm wheel back into the meshing area. The scope of this recall includes all Honda vehicles that were manufactured with this specific improperly produced steering worm wheel and spring. In view of the recall action being taken by Honda, ODI is closing EA23003. NHTSA reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Illustration