Steering. Review the 324 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Forward Collision Avoidance. Review the 37 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Lane Departure. Review the 30 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

21 crash reports1 fire reports15 injury reports

Exterior Lighting complaints

5 reports

Clear category filter

Mileage unknown · Feb 9, 2026

Exterior Lighting

Read full complaint

Vehicle: 2023 Honda CR-V Hybrid Sport Touring (OEM headlights; no aftermarket lighting modifications) Issue Type: Exterior Lighting – Headlights (low-beam performance/visibility) Description of Problem: I am submitting a safety complaint regarding the low-beam headlights on my 2023 Honda CR-V Hybrid Sport Touring. The low beams provide poor foreground illumination and create a distinct dark area directly in front of the vehicle. In real-world nighttime driving, the beam pattern leaves an obvious “dead zone”/shadowed region in the near-field (close to the front of the car), which reduces my ability to see road hazards, debris, pedestrians/animals, and lane-edge detail in time to react safely. The problem is most noticeable on unlit roads and in wet conditions, where the lack of usable light in the foreground makes it difficult to judge road surface changes and identify objects near the vehicle’s path. The cutoff/beam pattern appears abnormal in that the area immediately ahead is not properly lit despite the headlights being on and functioning. This is not related to dirty lenses, aftermarket bulbs, or modifications. Safety Impact: This headlight performance issue reduces forward visibility at night and increases the risk of a collision because hazards in the roadway may not be visible until the vehicle is very close. The dark zone in front of the vehicle is consistent and repeatable, not an occasional flicker or intermittent failure. Low-Speed Navigation: When making turns into unlit driveways or onto dark side streets, the area where the vehicle is turning remains pitch black, making it impossible to see pedestrians, cyclists, or road obstacles. Object Avoidance: At highway speeds, the "dark zone" prevents the driver from seeing road debris or potholes until they are directly under the vehicle, leaving zero time for evasive maneuvers. Headlights are original equipment and the vehicle has not been modified.

NHTSA ODI #11716835

Mileage unknown · Aug 15, 2025

Exterior Lighting

Read full complaint

Vehicle: 2023 Honda CR-V EX-L Problem: Headlights – poor visibility Complaint Description: The LED headlights on my 2023 Honda CR-V EX-L provide inadequate illumination at night. The beam is shadowy with dark zones, making it difficult to see pedestrians, signs, and road hazards, especially in rainy conditions. Even after checking alignment, the visibility remains unsafe. Other drivers often flash their high beams at me, mistaking my lights for being too dim or misaligned. This design presents a significant nighttime driving hazard.

NHTSA ODI #11681011

Mileage unknown · Dec 11, 2023

Exterior Lighting

This vehicle has the new "signature" Honda headlights. The low beam has two illuminated lights which oncoming drivers mistake as high beams. They flash their high beams at me to inform me that I am driving with high beams turned on when I am not temporarily blinding me and creating an unsafe situation. I live in a rural area wi…

Read full complaint

NHTSA ODI #11559511

Mileage unknown · Sep 25, 2023

Electrical SystemExterior LightingStructure

The reverse camera works poorly and is not clearly especially if it’s wet outside. Water smears on the camera more easily than other cars I have owned even if it’s not actively raining. My 2013 g37 and 2017 Mercedes glc300 never had visibility issues for the camera and the Infiniti is 11 years older. Honda states it’s normal. I …

Read full complaint

NHTSA ODI #11546355

Mileage unknown · Aug 15, 2023

Exterior Lighting

Driver side headlight stopped working, including low beam, high beam, turn signal. Dealer replaced whole headlight assembly under warrenty.

NHTSA ODI #11538708

Official recalls

24V744000 · Steering

Oct 3, 2024

Honda (American Honda Motor Co.) is recalling certain 2023-2025 Acura Integra, Civic Type R, CR-V Hybrid, CR-V, HR-V, 2022-2025 Civic, Civic Hatchback, 2024-2025 Acura Integra Type S, 2025 CR-V Fuel Cell EV, Civic Hybrid, and Civic Hatchback Hybrid vehicles. The steering gearbox assembly may have been manufactured incorrectly, which can cause excessive internal friction and lead to difficulty steering the vehicle.

Consequence & remedy

Consequence: Difficulty steering can increase the risk of a crash.

Remedy: Dealers will replace the worm gear spring and redistribute or add grease as necessary, free of charge. Owner notification letters were mailed November 18, 2024. Owners may contact Honda Customer Service at 1-888-234-2138. Honda's numbers for this recall are SJS, MJU, QJT and VJV.

23V858000 · Fuel System, Gasoline:delivery:fuel Pump

Dec 18, 2023

Honda (American Honda Motor Co.) is recalling certain 2013-2023 Honda Accord, Civic Coupe, Civic Sedan, Civic Hatchback, Civic Type R, CR-V, HR-V, Ridgeline, Odyssey, Acura ILX, MDX, MDX Hybrid, RDX, RLX, TLX, 2019-2022 Honda Insight, Passport, 2020 Honda CR-V Hybrid, 2018-2019 Honda Clarity PHEV, Fit, and 2015-2020 Honda Accord Hybrid, Pilot, Acura NSX vehicles. The fuel pump inside the fuel tank may fail.

Consequence & remedy

Consequence: Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.

Remedy: Dealers will replace the fuel pump module, free of charge. Owner letters were mailed September 6, 2024. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KGC and KGD. This recall is an expansion of NHTSA recall numbers 21V-215 and 20V-314.

23V092000 · Seats:front Assembly:recliner

Feb 16, 2023

Honda (American Honda Motor Co.) is recalling certain 2023 CR-V vehicles. The front passenger seat back frame may not have been welded properly, which can cause the seat back position to fail in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 207, "Seating Systems" and 201, "Occupant Protection in Interior Impact."

Consequence & remedy

Consequence: A seat back position that fails may not adequately restrain the occupant during a crash, increasing the risk of injury.

Remedy: Dealers will replace the front passenger seat back frame assembly, free of charge. Owner notification letters were mailed March 27, 2023. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is 6PK.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

EA23003 · Momentary Increased Steering Effort

Opened Nov 29, 2023 · Closed Jan 28, 2025

Status: closed (inferred from source dates) · Steering

On November 29, 2023, the Oﬃce of Defects Investigation (ODI) opened this Engineering Analysis (EA23003) to assess allegations of momentary increase in steering eﬀort in model years (MY) 2022-2023 Honda Civic, 2023MY Honda CR-V, and 2023MY Acura Integra vehicles (subject vehicles). The complaints received by ODI alleged that the subject vehicles experienced a momentary increase in required steering eﬀort (described as “sticky steering”) occurring mostly at highway speeds after driving for an extended amount of time; these complaints could not be duplicated during dealer service technicians’ quick test drives. The complaints had been received over the previous two years with most occurring with low vehicle mileage. The steering gear of these vehicles is aided by an electrical power assist unit. This power assist unit inputs force on the steering rack via a worm gear and worm wheel assembly. During PE23005, Honda stated this condition of momentary increase in steering eﬀort occurs due to two factors within this power assist unit. First, during manufacturing, the steering worm wheel goes through annealing and component conditioning processes. These processes cause internal stress and strain within the steering worm wheel. This strain is slowly released over the ﬁrst few months of the vehicle life. Over time, the released strain causes deformation of the teeth on the worm wheel, causing the worm gear to catch on the worm wheel. This catching results in the driver’s momentary increased steering eﬀort. Second, the manufacturing process did not guarantee consistent grease application and, therefore, some subject vehicles received insufficient grease which contributed to the momentary increase in steering eﬀort. During EA23003, ODI further analyzed the potential safety related consequences of the momentary increase in steering eﬀort. NHTSA’s Vehicle Research and Test Center (VRTC) duplicated the allegations of increased steering eﬀort. In addition, VRTC discovered the steering worm wheel and worm gear tended to push grease out of the meshing area, resulting in large amounts of grease resting on top of the worm wheel. Information Request responses collected and reviewed by ODI showed Honda had also discovered this additional root cause during NHTSA’s EA. In addition, Honda discovered the preload of the worm wheel gear spring was set too high, increasing the gear slide load and resulting in higher friction and increased torque ﬂuctuation when steering. The number of consumer complaints made to ODI continued to increase with the expansion of scope from the PE to the EA. Additionally, during EA23003, ODI received ten complaints alleging a crash, in addition to the 13 complaints ODI had received as of the time it opened EA23003. In total, 23 crashes have been reported to ODI due to this alleged defect. On October 3, 2024, Honda ﬁled NHTSA Recall No. 24V-744 to address this defect. The recall will provide consumers with a new steering worm wheel gear spring with a decreased load. Additionally, dealerships will add additional grease and relocate any grease sitting on top of the worm wheel back into the meshing area. The scope of this recall includes all Honda vehicles that were manufactured with this speciﬁc improperly produced steering worm wheel and spring. In view of the recall action being taken by Honda, ODI is closing EA23003. NHTSA reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identiﬁcation Number document, go to NHTSA.gov.

Go deeper into Honda CR-V problems

Honda CR-V electrical problems →Honda CR-V transmission problems →