2008 Honda CR-V

The contact owns a 2008 Honda CR-V. The contact stated that while having an inspection performed on the vehicle, she was informed that the rear sub frame was corroded and had holes. The vehicle was taken to the local dealer where the vehicle was repaired under NHTSA Campaign Number: 23V228000 (Structure). The contact stated that the rear support brace was added. The vehicle was repaired but the mechanic informed the contact that the vehicle was not drivable. The manufacturer was contacted but provided no additional assistance. The failure mileage was approximately 128,000.

The contact owns a 2008 Honda CR-V. The contact received notification of NHTSA Campaign Number: 23V228000 (Structure) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

The contact owns a 2008 Honda CR-V. The contact received notification of NHTSA Campaign Number: 23V228000 (Structure) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

The contact owns a 2008 Honda CR-V. The contact received notification of NHTSA Campaign Number: 23V228000 (Structure) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

The contact's son owned a 2008 Honda CR-V. The contact stated that while her son was driving at approximately 35 MPH, the rear axle detached from the vehicle. No warning lights were illuminated. A police report was filed. The vehicle was towed to a local dealer. The vehicle was then towed on two occasions to two separate independent mechanics, who related the failure to NHTSA Campaign Number: 23V228000 (Structure) and deemed the vehicle inoperable. The vehicle was not repaired and was towed to a salvage yard. The manufacturer was made aware of the failure. The approximate failure mileage was 130,000. The VIN was not available.

The contact owns a 2008 Honda CR-V. The contact stated that while her son was driving at 35 MPH, the rear subframe detached. The vehicle was towed to the residence. The contact related the failure to NHTSA Campaign Number: 23V228000 (Structure). The vehicle was not diagnosed nor repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure. The failure mileage was approximately 155,000.

Honda is aware of an issue affecting many CR-V's. Honda has recently issued a recall of the 2007-2011 model-year CR-V's in Canada for a rusting problem that could result in a rear suspension control arm separating from the vehicle. This recall applies to vehicles in all provinces from Ontario east, which experience heavy road salt usage and humid operating environments. Dealers were instructed to inspect the rear frame stiffeners and to apply corrosion protection. When a vehicle does not pass the inspection, Honda will offer to repurchase it. My son is 17 years old and is driving an affected CR-V. We live near Detroit in Michigan. I contacted Honda USA and lodged a complaint. I was given the following case #013293139 and instructed to set an appointment with a local Honda dealership for an inspection. Following the inspection, I was told and given a service invoice which stated, "SUBFRAME INSPECTION FOR HONDA CASE NUMBER 13293139 TECH FOUND REAR OF FRAME RUSTED THROUGH, TECH ADVISED STARTING WITH REMOVING REAR PART OF FRAME AND WELDING IN NEW METAL. VEHICLE NOT SAFE TO OPERATE IN CURRENT CONDITION. AMERICAN HONDA WILL NOT COVER REPAIR." This rust problem also affects other Honda vehicles and Honda is slowly issuing recalls. Recently, American Honda recalled 2006-2014 Ridgelines for "Rear Frame Corrosion." I would like Honda to repair my son's CR-V. This is not normal wear and tear. The corrosion problem continues to be focused on the rear driver side (subframe mounting to frame) of Honda vehicles. This is not safe for the public and this is not an acceptable response from American Honda as noted in the service invoice response listed above.

The contact owns a 2008 Honda CR-V. The contact stated while driving approximately 20-25 MPH, the rear passenger's side frame stiffeners detached and separated from the vehicle. The contact veered to the side of the road. The vehicle was towed to the contact's residence. Additionally, the contact stated that the frame stiffeners were severely rusted. The dealer and the manufacturer were not notified of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 262,000.

This vehicle had a wheel separation while traveling at low speed. The right rear wheel separated from the car. The cause is excessive rust to the trailing arm and specifically to the subframe to which the trailing arm is attached. The car is available for inspection. I also have photographs that show the problem. The safety issue is clear. After separation the car cannot be controlled if in motion. This particular vehicle has not been inspected. The wheel separation was reported by me to Honda in North America, to "Chris" in "client relations." A case number was issued for my complaint, #00499145. An insurance claim was made, but the insurer denied the claim. My research shows that this model CRV has been recalled in Canada for this precise problem. In Canada, Honda states that this model CRV has "excessive" rust, leading to failure. Further, that the problem is not readily apparent on inspection, and in fact this car is inspected annually as part of North Carolina licensure, and no inspection ever revealed the excessive rust threat. Here is the Honda press release: " January 23, 2019 Honda has voluntarily recalled approximately 83,953 2007-2011 CR-V vehicles in Canada to address potential excessive corrosion to the rear frame stiffener(s). On affected vehicles, one or both rear frame stiffener(s) may become excessively corroded over time. Such excessive corrosion may be more prevalent where a vehicle is regularly operated in regions where road de-icing salt is frequently used during the winter season. Although a certain amount of corrosion is expected to occur from everyday operation of the vehicle, excessive corrosion to the rear frame may result in frame stiffener perforation and, in extreme cases, cause the rear-trailing arm to separate from the vehicle’s frame structure. A separated rear-trailing arm may cause the vehicle to be difficult to control, increasing the risk of a crash."