FROM THE FIRST DAY I DROVE THE CIVIC HOME THERE HAS ALWAYS BEEN A SEVERE VIBRATION COMING FROM THE ABS EVERYTIME I HIT A BUMP OR POTHOLE-I USUALLY FEEL THESE VIBRATION AT LOW SPEEDS AS WHEN I AM DRIVING OUT OF MY BUMPING DRIVEWAY, THE VIBRATION IS REALLY SEVERE WHEN I AM APPLY THE BRAKES TO NOT HIT A BUMP OR POTHOLE TOO HARD. I …
Read full complaint
FROM THE FIRST DAY I DROVE THE CIVIC HOME THERE HAS ALWAYS BEEN A SEVERE VIBRATION COMING FROM THE ABS EVERYTIME I HIT A BUMP OR POTHOLE-I USUALLY FEEL THESE VIBRATION AT LOW SPEEDS AS WHEN I AM DRIVING OUT OF MY BUMPING DRIVEWAY, THE VIBRATION IS REALLY SEVERE WHEN I AM APPLY THE BRAKES TO NOT HIT A BUMP OR POTHOLE TOO HARD. I REALLY DIDNT GIVE IT MUCH THOUGHT (FIGURED I WAS JUST NEEDING TO GET USED TO NEW TECHNOLOGY) UNTIL WHILE DRIVING AT SLOW SPEED (25 OR LESS) ON AN ICY CITY OF TULSA , OK, EVERTIME I APPLIED THE BRAKES GENTLY TO COME TO A STOP AT A STOP LIGHT THE FRONT BRAKES VIBRATED VIOLENTLY & LOCKED UP PREVENTING ME FROM COMING TO A SAFE STOP. ONCE THE BRAKES LOCKED THE CIVIC IMMEDIATELY WENT INTO A SLIDE & ONLY STOPPED WHEN IT'S MOMENTUM SLOWED DOWN. THE BRAKES WERE ABSOLUTELY USELESS IN STOPPING THE VEHICLE BY GENTLY SLOWING IT DOWN AS HAS BEEN NORMAL WITH EVERY OTHER VEHICLE I HAVE EVER OWNED. I WAS SO AFRAID OF THE BRAKES THAT I TESTED THEM ON THE BUMPING GRAVEL ROAD JUST BEFORE I GOT HOME THAT AFTERNOON AND SURE ENOUGH THEY LOCKED UP AGAIN UNDER MORE PRESSURE THAN NEEDED UNDER NORMAL BRAKING CONDITIONS. I DISCUSSED THIS PROBLEM WITH DON CARLTON HONDA'S SERVICE SUPERVISOR TODAY (02/16/01) WHEN I TOOK THE CAR IN FOR IT'S OIL CHANGE. I WAS TOLD THAT THIS IS THE WAY HONDA'S ABS OPERATES AND THE BRAKES ARE DESIGNED FOR DRY WEATHER & SMOOTH ROAD CONDITIONS AND IF THE BRAKES EVER SENSE SLIPPING OR ROUGH CONDITIONS THEY WILL "ALWAYS" LOCK UP BECAUSE OF THEIR DESIGN AND THAT THERE IS NOTHING TO BE FIXED OR THAT CAN BE DONE BY HONDA TO CORRECT THE PROBLEM. I FIND THIS EXPLANATION "ABSURD" AND "RIDICULOUS" -HOW COULD BRAKES THIS DANGEROUS BE CONSIDERED NORMAL. THE ONLY REASON I DIDN'T PLOW INTO SOMEONE THAT ICY DAY IS BECAUSE LUCKILY FOR ANYONE ELSE & ME THERE WAS NO CAR OR PERSON IN FRONT OF ME WHEN I TRIED TO STOP ON THE ICY CITY STREET. PLEASE HELP ME IF YOU CAN-I AM NOW SCARED TO DRIVE THIS CAR. *AK
NHTSA ODI #741033
Mileage unknown · Jan 18, 2001
Air BagsService Brakes, HydraulicCrash
WHILE DRIVING 65MPH APPLIED BRAKES TO SLOW DOWN, RELEASED BRAKES, AND APPLIED BRAKES AGAIN. BUT, HAD NO BRAKES, AND REAR ENDED ANOTHER VEHICLE IN FRONT. UPON IMPACT, AIR BAGS DID NOT DEPLOY. NO INJURIES. *AK
NHTSA ODI #878513
Mileage unknown · Dec 15, 2000
Air BagsService Brakes, HydraulicCrash
WHILE DRIVING ABOUT 55 MPH AND APPLYING BRAKES TO REDUCE SPEED, REAR ENDED ANOTHER VEHICLE. BUT, NONE OF THE AIR BAGS DEPLOYED. *AK
Honda (American Honda Motor Co.) is recalling certain 1998 Acura 2.2CL, 1998-1999 Acura 2.3CL, 1998-1999 Acura 3.0CL, 2001 Acura 3.2CL and Acura MDX, 1998-2000 Honda Accord Coupe, Accord Sedan, Civic Sedan, Odyssey and Acura 3.5RL, 1999-2000 Acura 3.2TL, 1996-2000 Civic Coupe, 1997-2000 CR-V, 1997-1998 EV Plus, and 1998-1999 Isuzu Oasis vehicles. These vehicles were equipped with Non-Azide Driver air bag Inflators (NADI) and do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb moisture, causing the inflators to rupture or the air bag cushion to underinflate.
Consequence & remedy
Consequence: In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag cushion may not properly protect the occupant. These scenarios increase the risk of serious injury or death.
Remedy: Honda will notify owners, and dealers will inspect the driver frontal air bag inflator, and replace it if necessary, with an inflator of a different design, free of charge. The recall began October 1, 2020. Owners may contact American Honda's Customer Support & Campaign Center at 1-888-234-2138 or Isuzu customer service at 1-800-255-6727.
Honda (American Honda Motor Co.) is recalling certain 2001-2002 Acura 3.2CL, 2000-2003 Acura 3.5RL, 2000-2001 Acura 3.2TL, Honda CR-V and Honda Odyssey, 2001-2002 Acura MDX and 2000 Accord Coupe, Accord Sedan, Civic Coupe, and Civic Sedan vehicles. These vehicles may have received a replacement driver frontal air bag module as part of a vehicle repair. Due to a manufacturing issue, the replacement NADI inflator may absorb moisture, causing the inflator to rupture or the air bag cushion to underinflate.
Consequence & remedy
Consequence: In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag cushion may not properly protect the occupant. These scenarios increase the risk of serious injury or death.
Remedy: Honda will notify owners, and dealers will inspect the air bags in the vehicles, replacing the driver frontal air bag inflator with an inflator of a different design, as necessary, free of charge. The recall began October 1, 2020. Owners may contact American Honda's Customer Support & Campaign Center at 1-888-234-2138.
ON CERTAIN COMPRESSED NATURAL GAS (CNG) VEHICLES, IN THE EVENT OF A SEVERE INTERIOR FIRE IN THE AREA OF THE REAR SEAT, THE CNG TANK MAY BE HEATED UNEVENLY, PREVENTING THE PRESSURE RELIEF DEVICE FROM VENTING THE CONTENTS OF THE TANK AS DESIGNED.
Consequence & remedy
Consequence: THIS COULD RESULT IN A TANK RUPTURE, EXPLOSION, AND EJECTION OF THE TANK FROM THE VEHICLE.
Remedy: DEALERS WILL INSTALL A HEAT INSULATOR MATERIAL TO THE REAR SEAT BACK. AN INTERIM OWNER LETTER WAS MAILED TO OWNERS BEGINNING NOVEMBER 26, 2007. WHEN PARTS ARE AVAILABLE, OWNERS WILL BE RENOTIFIED ASKING THEM TO BRING IN THEIR VEHICLE FOR REPAIR. OWNERS MAY CONTACT HONDA AT 1-800-999-1009.
ON CERTAIN SEDANS, COUPES, HATCHBACKS, AND SPORT UTILITY VEHICLES, ELECTRICAL CONTACTS IN THE IGNITION SWITCH CAN DEGRADE DUE TO THE HIGH ELECTRICAL CURRENT PASSING THROUGH THE SWITCH WHEN THE VEHICLE IS STARTED.
Consequence & remedy
Consequence: WORN CONTACTS COULD CAUSE THE ENGINE TO STALL WITHOUT WARNING, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL REPLACE THE IGNITION SWITCH. OWNER NOTIFICATION BEGAN JUNE 14, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HONDA AT 1-800-999-1009 OR ACURA AT 1-800-382-2238.
CERTAIN SEDANS AND COUPES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES." CERTAIN REAR SEAT BELT BUCKLES WERE IMPROPERLY MANUFACTURED.
Consequence & remedy
Consequence: THE REAR SEAT BELTS WILL WORK PROPERLY AND PROVIDE PROTECTION IN A CRASH, BUT THE OWNER MAY EXPERIENCE DIFFICULTY UNFASTENING THE BELT AFTER THE CRASH.
Remedy: IN A PREVIOUS RECALL (01V-380), ONLY RIGHT AND LEFT BUCKLES WERE INSPECTED. THE REAR CENTER BUCKLE SHOULD ALSO BE INSPECTED AND CORRECTED IF NECESSARY. THIS RECALL IS BEING CONDUCTED ONLY FOR THE CENTER BUCKLE. DEALERS WILL INSPECT THE VEHICLES AND REPLACE THE SEAT BELT ASSEMBLIES THAT WERE IMRPOPERLY MANUFACTURED. ONLY BUCKLES THAT ARE MARKED (ON THE BACK SIDE OF THE BUCKLE) WITH AN ASSEMBLY NUMBER BEGINNING WITH 00185, 00186, OR 00187, WILL BE REPLACED. OWNERS SHOULD CONTACT THEIR DEALER FOR THIS REPLACEMENT. OWNER NOTIFICATION BEGAN MARCH 5, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HONDA AT 1-800-999-1009.
VEHICLE DESCRIPTION: CERTAIN SEDANS AND COUPES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 209, "SEAT BELT ASSEMBLIES." CERTAIN REAR SEAT BELT BUCKLES WERE IMPROPERLY MANUFACTURED.
Consequence & remedy
Consequence: THE REAR SEAT BELTS WILL WORK PROPERLY AND PROVIDE PROTECTION IN A CRASH, BUT THE OWNER MAY EXPERIENCE DIFFICULTY UNFASTENING THE BELT AFTER THE CRASH.
Remedy: DEALERS WILL INSPECT THE VEHICLES AND REPLACE THE SEAT BELT ASSEMBLIES THAT WERE IMPROPERLY MANUFACTURED. ONLY BUCKLES THAT ARE MARKED (ON THE BACK SIDE OF THE BUCKLE) WITH AN ASSEMBLY NUMBER BEGINNING WITH 00185, 00186, OR 00187, WILL BE REPLACED. OWNERS SHOULD CONTACT THEIR DEALER FOR THIS REPLACEMENT. OWNER NOTIFICATION BEGAN JANUARY 22, 2002. OWNERS WHO TAKE THEIR VEHICLES TO AN AUTHORIZED DEALER ON AN AGREED UPON SERVICE DATE AND DO NOT RECEIVE THE FREE REMEDY WITHIN A REASONABLE TIME SHOULD CONTACT HONDA AT 1-800-999-1009.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Illustration