Counts are not failure probabilities and are not adjusted for sales, age, mileage exposure or reporting. One report may name several categories. Comparison method and limitations.
Lane Assist Issues. During the time inwhiche I've had the Honda Lane Assist on I've experienced the car wanting to abruptly change direction, system acted as if it was trying to avoid a collision or navigate a non existing turn object in path. I'm also experiencing issues with the TSR system - Honda Traffic Sign Recognition…
Read full complaint
Lane Assist Issues. During the time inwhiche I've had the Honda Lane Assist on I've experienced the car wanting to abruptly change direction, system acted as if it was trying to avoid a collision or navigate a non existing turn object in path. I'm also experiencing issues with the TSR system - Honda Traffic Sign Recognition (TSR). This system will show a stop sign, yield sign when there isn't any sign of any type around. I'm also experiencing time when it's indicates I'm traveling in a wrong way direction as a sign in instrument panel will appear showing a red sign with a black mark across which indicates a do not enter. This could cause an accident if happening to a driver in a unfamiliar area as they might come to an ubrupt stop thinking their going in a wrong direction or going to run a stop sign. Note: I keep my car extremely clean, taking care to clean windshield a area where radar is placed on front grill.
NHTSA ODI #11624579
Mileage unknown · Jan 10, 2024
Back Over PreventionForward Collision Avoidance
I was trying to back up and the car would not go. A warning on the dash came on that said collision Mitigation System problem, see your dealer. I put the car in drive and it hesitated like a brake was on. .I couldn't get above 10 miles per hour. It was like I was trying to go forward, but someone was pulling me back at the same …
Read full complaint
I was trying to back up and the car would not go. A warning on the dash came on that said collision Mitigation System problem, see your dealer. I put the car in drive and it hesitated like a brake was on. .I couldn't get above 10 miles per hour. It was like I was trying to go forward, but someone was pulling me back at the same time. I took it to the dealer and they said nothing was wrong.
Honda (American Honda Motor Co.) is recalling certain 2023-2024 Honda Accord, Accord Hybrid, Civic Sedan, Civic Hatchback, Pilot, and 2024 HR-V, Acura Integra and Acura Integra Type S vehicles. The driver's seat cushion frame may not have been tightened properly, which can result in an unsecured seat. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 207, "Seating Systems."
Consequence & remedy
Consequence: An unsecured driver's seat may not adequately restrain the driver during a crash, increasing the risk of injury.
Remedy: Dealers will replace the driver's seat cushion frame, free of charge. Owner notification letters were mailed January 6, 2025. Owners may contact Honda customer service at 1-888-234-2138.
Honda (American Honda Motor Co.) is recalling certain 2023-2024 Honda Accord, Accord Hybrid, 2023-2025 Honda CR-V Hybrid, and 2025 Honda Civic and Civic Hybrid vehicles. The high-pressure fuel pump may crack and leak fuel.
Consequence & remedy
Consequence: A fuel leak in the presence of an ignition source can increase the risk of a fire.
Remedy: Dealers will inspect and replace the high-pressure fuel pump as necessary, free of charge. Owner letters were mailed February 20, 2025. Owners may contact Honda customer service at 1-888-234-2138. Honda's number for this recall is PJW.
Honda (American Honda Motor Co.) is recalling certain 2023-2024 Accord and HR-V vehicles. The front seat belt pretensioners may be missing the rivet that secures the quick connector and wire plate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection," 209, "Seat Belt Assembles," and 210, "Seat Belt Assembly Anchorages."
Consequence & remedy
Consequence: A seat belt pretensioner missing a rivet will not properly restrain the occupant, increasing the risk of injury during a crash.
Remedy: Dealers will inspect and replace the seat belt pretensioner assemblies as necessary, free of charge. Owner notification letters were mailed January 8, 2024. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are MG7 and NG5.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Defect investigations
1
RQ24006 · Front Seat Belt Assemblies May Be Missing The Rivet That Secures The Quick Connector And Wire Plate
On April 4, 2024, the Office of Defects Investigations (ODI) opened RQ24006 to investigate American Honda Motor Co.’s (Honda’s) proposed remedy for recall 23V-782 as well as scope of the vehicles involved. Honda issued recall 23V-782 on November 21, 2023, which concerns certain model year (MY) 2023-2024 Honda Accord, Honda Accord Hybrid, and Honda HR-V vehicles. Recall 23V-782 states that the driver and front passenger seat belt pretensioner assemblies may have been manufactured without a rivet that secures the pretensioner quick connector and wire plate. Recall documentation states that seat belt pretensioner assemblies that are missing the rivet will not properly restrain the occupant in the event of a collision, increasing the risk of injury.Subject defective seat belt assemblies are installed as original equipment for both the driver and front passenger positions for the HR-V, but only for the driver position for the Accord and Accord Hybrid. The recall remedy for 23V-782 instructs the technician to inspect both front seat belt pretensioner assemblies and, if necessary, replace them. The inspection procedure requires the technician to utilize a pull force gauge to determine whether the subject component is missing the subject rivet and requires replacement. Parts requiring replacement are determined by whether the pretensioner quick connector separates from the pretensioner assembly while the technician is pulling on the seat belt. If no separation occurs, then the part is determined to be not defective and not require replacement. There have been no reports alleging a failure of seat belt pretensioner assemblies after the inspect and replace remedy for recall 23V-782 was performed. Additionally, no comparable failures have been observed in field data for similar vehicles outside of the scope of the recall. As of the 4th quarter of 2024, the recall completion rate is at approximately 84% of the total recalled population. In view of the lack of failures after the remedy for recall 23V-782 was performed, and the lack of failures in similar vehicles outside of the scope of the recall, ODI is closing this Recall Query (RQ). The Agency reserves the right to take additional action if warranted by future circumstances.
Additional source detail variants (2)
Seat Belts:front
On April 4, 2024, the Office of Defects Investigations (ODI) opened RQ24006 to investigate American Honda Motor Co.’s (Honda’s) proposed remedy for recall 23V-782 as well as scope of the vehicles involved. Honda issued recall 23V-782 on November 21, 2023, which concerns certain model year (MY) 2023-2024 Honda Accord, Honda Accord Hybrid, and Honda HR-V vehicles. Recall 23V-782 states that the driver and front passenger seat belt pretensioner assemblies may have been manufactured without a rivet that secures the pretensioner quick connector and wire plate. Recall documentation states that seat belt pretensioner assemblies that are missing the rivet will not properly restrain the occupant in the event of a collision, increasing the risk of injury.Subject defective seat belt assemblies are installed as original equipment for both the driver and front passenger positions for the HR-V, but only for the driver position for the Accord and Accord Hybrid. The recall remedy for 23V-782 instructs the technician to inspect both front seat belt pretensioner assemblies and, if necessary, replace them. The inspection procedure requires the technician to utilize a pull force gauge to determine whether the subject component is missing the subject rivet and requires replacement. Parts requiring replacement are determined by whether the pretensioner quick connector separates from the pretensioner assembly while the technician is pulling on the seat belt. If no separation occurs, then the part is determined to be not defective and not require replacement. There have been no reports alleging a failure of seat belt pretensioner assemblies after the inspect and replace remedy for recall 23V-782 was performed. Additionally, no comparable failures have been observed in field data for similar vehicles outside of the scope of the recall. As of the 4th quarter of 2024, the recall completion rate is at approximately 84% of the total recalled population. In view of the lack of failures after the remedy for recall 23V-782 was performed, and the lack of failures in similar vehicles outside of the scope of the recall, ODI is closing this Recall Query (RQ). The Agency reserves the right to take additional action if warranted by future circumstances.
Seat Belts
On April 4, 2024, the Office of Defects Investigations (ODI) opened RQ24006 to investigate American Honda Motor Co.’s (Honda’s) proposed remedy for recall 23V-782 as well as scope of the vehicles involved. Honda issued recall 23V-782 on November 21, 2023, which concerns certain model year (MY) 2023-2024 Honda Accord, Honda Accord Hybrid, and Honda HR-V vehicles. Recall 23V-782 states that the driver and front passenger seat belt pretensioner assemblies may have been manufactured without a rivet that secures the pretensioner quick connector and wire plate. Recall documentation states that seat belt pretensioner assemblies that are missing the rivet will not properly restrain the occupant in the event of a collision, increasing the risk of injury.Subject defective seat belt assemblies are installed as original equipment for both the driver and front passenger positions for the HR-V, but only for the driver position for the Accord and Accord Hybrid. The recall remedy for 23V-782 instructs the technician to inspect both front seat belt pretensioner assemblies and, if necessary, replace them. The inspection procedure requires the technician to utilize a pull force gauge to determine whether the subject component is missing the subject rivet and requires replacement. Parts requiring replacement are determined by whether the pretensioner quick connector separates from the pretensioner assembly while the technician is pulling on the seat belt. If no separation occurs, then the part is determined to be not defective and not require replacement. There have been no reports alleging a failure of seat belt pretensioner assemblies after the inspect and replace remedy for recall 23V-782 was performed. Additionally, no comparable failures have been observed in field data for similar vehicles outside of the scope of the recall. As of the 4th quarter of 2024, the recall completion rate is at approximately 84% of the total recalled population. In view of the lack of failures after the remedy for recall 23V-782 was performed, and the lack of failures in similar vehicles outside of the scope of the recall, ODI is closing this Recall Query (RQ). The Agency reserves the right to take additional action if warranted by future circumstances.
An investigation is not a finding of a defect, and closure does not prove a vehicle is problem-free.
Illustration