1996 Ford Taurus Sho

CAMSHAFTS IN THE 1996-1999 TAURUS SHO. I HAVE HAD A FAILURE LIKE MANY OTHERS, THERE HAVE BEEN OVER 250 FAILURES OF THIS TYPE, MINE WAS FAILURE NUMBER 221. I WAS DRIVING THE CAR AND THE ENGINE SEIZED CAUSING THE CAR TO DART TO THE RIGHT, IF THERE WAS A VEHICLE THERE, WE WOULD HAVE COLLIDED. $8500.00 IN DAMAGE, FORD WILL NOT COVER ANY OF IT, THIS IS A QUOTE FROM A FORD REP. "METAL WEARS" BUT AT THE RATE THAT THIS IS HAPPENING IS ALARMING, 18 CARS SO FAR SINCE 02-01-2002. AT ABOUT $8000.00 EACH CAR IS $144,000.00 DAMAGES FEBUARY ALONE, FOR ALL 250 CARS, IT IS $2,000,000.00 IN DAMAGES (ESTIMATED). THIS IS A SERIOUS PROBLEM WITH THE DESIGN OF THE CAMSHAFT, AND SHOULD BE LOOKED INTO.

I AM WRITING YOU NOW, ONE YEAR AFTER THE FACT, BECAUSE I HAVE LEARNED THERE OVER 100 MORE SHO OWNERS WITH THIS SAME PROBLEM. MY ENGINE SHUT OFF WITH ONLY A MINUTE OR TWO WARNING, LOST ALL POWER, AND I HAD TO MAKE AN EMERGENCY STOP OFF THE SIDE OF THE ROAD (WITH MY TWO BABIES ON BOARD). I WAS LUCKILY ON A RURAL ROAD IN THE COUNTRY, IF I WERE ON A HIGHWAY, FREEWAY, OR MORE TRAVELED AREA, I KNOW I WOULD HAVE BEEN HIT. I AM VERY CONCERNED ABOUT THE SAFETY OF THOSE OUT THERE WHO ARE DRIVING THE SAME MAKE AND MODEL CAR. WE HAVE ALREADY CONTACTED FORD MANY TIMES, AND THEY ARE NOT LISTENING. PLEASE HELP.*AK

MY 1996 FORD TAURUS SHO STARTED MAKING A CHATTER NOISE ON THE TOP END OF ENGINE. I TOOK IT TO A FORD DEALER IN ALBANY, NY. THE DEALER WAS ORANGE MOTORS. THEY CHARGED ME 100.00 TO DIAGNOS THE PROBLEM. THEY SAID I NEEDED A NEW ENGINE AND THE COST WAS GOING TO BE $12,000.00. SINCE I WAS IN SHOCK WITH THE PRICE, I LOOKED INTO THE PROBLEM MYSELF AND FOUND A WEBSITE V8SHO.COM. THEY DESCRIBED MY EXACT FAILRURE. THIS IS A COMMON FAILURE AMONG ALL 1996,97,98,AND 99 SHO'S. THE ENGINE IS BUILT BY YAMAHA FOR FORD. THE PROBLEM IS THE DESIGN OF THE CAM SHAFT. THE TIMING GEAR SPROCKET IS PRESSED ONTO THE CAM AND CAN COME LOOSE AT ANY TIME. IF YOU HEAR THE AUDIBLE CHATTER FROM THE ENGINE, YOU MUST STOP DRIVING IMMEDIATELY. IF YOU CONTINUE TO DRIVE THE GEAR WILL SLIP ON THE CAM AND THE ENGINE WILL SELF DESTRUCT BENDING VALVES AND DESTROYING THE ENGINE. IT DOESN'T MATTER HOW AN INDIVIDUAL MAINTAINS THE CAR. THIS CAN HAPPEN TO ANYONE AT ANYTIME. FORD KNOWS OF THE PROBLEM. THEY ISSUED SPECIAL SERVICE BULLITEN 15879 TO CHECK FOR THE PROBLEM. IN MY CASE THE FORD DEALER WHERE I TOOK THE SHO DIDN'T EVEN TELL ME NOT TO DRIVE THE CAR ANY FURTHER. WHEN THIS IS CAUGHT IN THE BEGINNING STAGES YOU CAN WELD THE SPROKETS TO THE CAM. AFTER TAKING MY CAR APART MYSELF, I FOUND BOTH FRONT CAMS TO HAVE A PROBLEM. ONE MOVES LEFT AND RIGHT ON THE SPROKET AND THE OTHER IS LOOSE ON THE CAM.(READY TO SPIN COMPLETELY LOOSE AND KILL THE ENGINE. THE COST OS THIS SAFETY ISSUE SHOULD NOT BE THE CONSUMER'S RESPONSIBILITY. THIS IS A LATENT DEFECT BY THE MANUFACTURER.*AK

THE CAR DIED WHILE DRIVING ON A MAJOR HIGHWAY AND AFTER AVOIDING TRAFFIC AND COASTING OFF OF THE HIGHWAY WAS TOWED TO THE LOCAL FORD DEALERSHIP. THEIR DIAGNOSIS IS THAT THE SPLINES ON THE CAMSHAFT GEAR OF THE INTAKE CAMSHAFT ON THE REAR CYLINDER HEAD ARE STRIPPED AND THE SPLINES ON THE EXHAUST CAMSHAFT ARE IN POOR CONDITION. ESTIMATED COST OF REPAIR $4500 - $5000. THE CAR CURRENTLY HAS APPROXIMATELY 68K MILES ON IT.*AK

CAM SHAFT FAILURE ON 3.4L V8 SHO ENGINE. VEHICLE HAD TICKING NOISE, THEN VEHICLE LOST POWER AND MAJOR ENGINE FAILURE. UPON INSPECTION, CAM IS STRIPPED AND WILL NEED REPLACEMENT. ESTIMATED REPAIR COST OVER $4,000 USD OR REPLACEMENT ENGINE. I HAVE 47 DOCUMENTED CASES OF CAM SHAFT FAILURE IN 1996-1998 TAURUS SHO'S WILL MILEAGE BETWEEN 40,000 TO 100,000. MEDIAN MILEAGE IS 85,000. FORD MECHANICS SEEM TO THINK PROBLEM IS POOR DESIGN OF THE PART, AND THEY ARE DESTINED TO FAIL. FORD DOES NOT WANT TO RECALL DUE TO VEHICLE IS NO LONGER IN PRODUCTION. THIS FAILURE CAN BE DANGEROUS AS MOST FAILURES ARE COMING WHEN VEHICLE IS DRIVING, AND VEHICLE JUST SHUTS DOWN. *AK