VEHICLE DESCRIPTION: MEDIUM DUTY TRUCKS EQUIPPED WITH 7.0L LIQUEFIED PETROLEUM GAS (LPG) ENGINE OR 7.0L EFI (GASOLINE) ENGINE WITH THE OPTIONAL CAB FLOOR PAN REINFORCEMENT. THE ENGINE WIRING HARNESS OR BATTERY CABLE CAN BE PINCHED BETWEEN THE OPTIONAL CAB REINFORCEMENT AND THE FRAME CAUSING AN ABRASION WHICH COULD RESULT IN AN ELECTRICAL SHORT CIRCUIT.
Consequence & remedy
Consequence: A SHORT CIRCUIT CAN CAUSE OVERHEATING AND ARCING.
Remedy: DEALERS WILL MODIFY THE REINFORCEMENT(S) AND, IF NECESSARY, REPOSITION THE ENGINE WIRING HARNESS (INCLUDING INSTALLATION OF THE REVISED ENGINE WIRE HARNESS RETENTION BRACKET) AND BATTERY CABLE.
Additional source detail variants (2)
Electrical System:wiring:front Underhood
VEHICLE DESCRIPTION: MEDIUM DUTY TRUCKS EQUIPPED WITH 7.0L LIQUEFIED PETROLEUM GAS (LPG) ENGINE OR 7.0L EFI (GASOLINE) ENGINE WITH THE OPTIONAL CAB FLOOR PAN REINFORCEMENT. THE ENGINE WIRING HARNESS OR BATTERY CABLE CAN BE PINCHED BETWEEN THE OPTIONAL CAB REINFORCEMENT AND THE FRAME CAUSING AN ABRASION WHICH COULD RESULT IN AN ELECTRICAL SHORT CIRCUIT.
Consequence: A SHORT CIRCUIT CAN CAUSE OVERHEATING AND ARCING.
Remedy: DEALERS WILL MODIFY THE REINFORCEMENT(S) AND, IF NECESSARY, REPOSITION THE ENGINE WIRING HARNESS (INCLUDING INSTALLATION OF THE REVISED ENGINE WIRE HARNESS RETENTION BRACKET) AND BATTERY CABLE.
Electrical SYSTEM:12V/24V/48V Battery:cables
VEHICLE DESCRIPTION: MEDIUM DUTY TRUCKS EQUIPPED WITH 7.0L LIQUEFIED PETROLEUM GAS (LPG) ENGINE OR 7.0L EFI (GASOLINE) ENGINE WITH THE OPTIONAL CAB FLOOR PAN REINFORCEMENT. THE ENGINE WIRING HARNESS OR BATTERY CABLE CAN BE PINCHED BETWEEN THE OPTIONAL CAB REINFORCEMENT AND THE FRAME CAUSING AN ABRASION WHICH COULD RESULT IN AN ELECTRICAL SHORT CIRCUIT.
Consequence: A SHORT CIRCUIT CAN CAUSE OVERHEATING AND ARCING.
Remedy: DEALERS WILL MODIFY THE REINFORCEMENT(S) AND, IF NECESSARY, REPOSITION THE ENGINE WIRING HARNESS (INCLUDING INSTALLATION OF THE REVISED ENGINE WIRE HARNESS RETENTION BRACKET) AND BATTERY CABLE.
THE HAND THROTTLE CABLE CAN WEAR THE BRASS SWIVEL BLOCK ON THE GOVERNOR LEVER THROUGH WHICH IT PASSES.
Consequence & remedy
Consequence: THIS WEAR CAN RESULT IN THE GOVERNOR JAMMING IN THEDAMAGED SWIVEL AND COULD PREVENT THE GOVERNOR LEVER FROM RETURNING TO THE IDLE POSITION.
Remedy: DEALERS WILL INSTALL A REVISED GOVERNOR LEVER WITH A STAINLESS STEEL SWIVEL. ALSO LETTERS WILL BE SENT TO VEHICLE OWNERS THAT HAVE THE SAME VEHICLES BUT DO NOT HAVE A FORD INSTALLED HAND THROTTLE ADVISING THEM THAT THEY MAY REQUIRE SERVICE IF THEY HAVE HAD AN AFTER MARKET HAND THROTTLE INSTALLED.
A CONNECTOR IN THE WIRING WHERE THE TILT HOOD MOUNTED LAMPS ATTACH TO THE VEHICLE WIRING HARNESS WAS BUILT WITHOUT SEALING PLUGS. MOISTURE, ROAD SALT OR OTHER CONTAMINANTS CAN ENTER THE CONNECTION RESULTING IN CROSSED CIRCUITS, SHORTS OR CORROSION OF THE WIRING OF THE CONNECTOR.
Consequence & remedy
Consequence: THE HEADLAMPS OR OTHER FRONT-END LIGHTING SYSTEMS CAN MALFUNCTION AS A RESULT OF THIS CONDITION INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.
Remedy: DEALERS WILL INSPECT THE CONNECTOR AND INSTALL SEALING PLUGS IN THE OPEN CAVITIES. IF THE INSPECTION REVEALS CORROSION, A NEW CONNECTOR WILL BE INSTALLED.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
1994 Ford F700 Problems, Complaints & Recalls | Skip That Year
Illustration