Service Brakes. Review the 57 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Electrical System. Review the 56 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Power Train. Review the 56 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

14 crash reports0 fire reports6 injury reports

What owners actually said

382 reports

9,000 miles · Jun 11, 2014

Service BrakesVehicle Speed Control

Read full complaint

TL* THE CONTACT OWNS A 2014 FORD EDGE. WHILE DRIVING APPROXIMATELY 35 MPH, THE CONTACT EXPERIENCED HARD BRAKING WHEN THE BRAKE PEDAL WAS DEPRESSED. THERE WERE NO INDICATORS ILLUMINATED ON THE INSTRUMENT PANEL. THE DEALER STATED THAT THERE WAS A GLITCH AND WOULD NOT REPAIR THE VEHICLE. THE MANUFACTURER WAS NOTIFIED. THE APPROXIMATE FAILURE MILEAGE WAS 9,000. UPDATED 08/19/14*LJ THE CONSUMER STATED WHEN THE CRUISE CONTROL WA ACTIVATED AND DRIVING ON A STRAIGHT ROAD, THE BRAKES WOULD ACTIVATE. UPDATED 08/21/14

NHTSA ODI #10597600

295 miles · Jun 5, 2014

Visibility

Read full complaint

FIVE DAYS AFTER TAKING DELIVERY OF MY 2014 FORD EDGE I GOT INTO THE VEHICLE AND NOTICED A HAIRLINE CRACK IN THE WINDSHIELD STARTING ROUGHLY IN THE CENTER FROM THE BASE OF THE WINDSHIELD GOING UPWARD IN A SINUOUS DIRECTION. THE CAR HAD 295 MILES ON IT AT THE TIME. NO STONES OR ROCKS HIT THE WINDSHIELD. I IMMEDIATELY CALLED MY SALES PERSON TO REPORT THE CRACK AS I FELT IT WAS A MANUFACTURE DEFECT RATHER THAN DRIVER NEGLIGENCE FIXED BY AN INSURANCE CLAIM. SALES PERSON TALKED TO A MANAGER WHO SAID IF I HADN'T PURCHASED THE INCIDENTAL INSURANCE "COMPLETE TITANIUM PLUS", THEN IT WOULD HAVE TO BE REPORTED TO MY INSURANCE. THE NEXT DAY I WENT INTO THE DEALERSHIP WITH MY BROTHER, TALKED TO THE SALESMAN WHO SAID THIS ISN'T COVERED UNDER THE 3 YR/36,000 MILE WARRANTY (WHICH IT ISN'T). HOWEVER, IN FORD'S OWNER MANUAL THERE IS A 12,000 MILE 12 MONTH WARRANTY AGAINST MANUFACTURE DEFECTS. SALES PERSON BROUGHT OUT THE USED CAR SALES MANAGER WHO TRIED TO TELL US THIS WAS NOT MY FAULT, NOT HIS FAULT AND THIS IS WHY A PERSON CARRIES INSURANCE. WE TOLD HIM THIS IS UNACCEPTABLE ON A BRAND NEW CAR WHICH I HAD LESS THAN A WEEK WITH ONLY 295 MILES ON IT. WE TOLD HIM THIS IS A MANUFACTURERS DEFECT AND HE NEEDS TO WORK WITH FORD TO FIX IT. HE TRIED TO PLAY IT OFF AS HE THOUGHT I BOUGHT A USED CAR (APPEARED TO BE A GIMMICK) AND TOLD SALES PERSON TO BE MORE CLEAR ON NEW VS. USED (AGAIN, APPEARED TO BE A GIMMICK). HIS TUNE CHANGED AND THE SERVICE DEPARTMENT LOOKED AT THE CRACK AND SNAPPED PHOTOS OF WINDSHIELD TO SUBMIT TO FORD. TURNS OUT, FORD IS GOING TO FIX THE WINDSHIELD WITH NO COST TO ME. THE DEALER IS ALSO GIVING ME A LOANER CAR WHILE THE WORK IS BEING DONE. *TR

NHTSA ODI #10596361

Official recalls

20V692000 · Power Train:axle Assembly:axle Shaft

Nov 10, 2020

Ford Motor Company (Ford) is recalling certain 2014-2016 Explorer, 2014-2015 Taurus and 2014 Edge vehicles equipped with 2.0L or 2.3L engines and front wheel drive. The support bracket for the front drive axle halfshaft may fail.

Consequence & remedy

Consequence: The failed bracket could result in a loss of park function which can cause unintended vehicle movement, and loss of motive power while driving which increases the risk of a crash.

Remedy: Ford will notify owners, and dealers will replace the link shaft bracket, free of charge. Parts are not currently available. Owners received an interim notification detailing safety risk December 8, 2020. A second letter will be mailed when parts become available in January 2021. The recall began February 2, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S63.

15V005000 · Fuel System, Gasoline:delivery:fuel Pump

Jan 9, 2015

Ford Motor Company (Ford) notified the agency on January 8, 2015, that they are recalling certain model year 2014 Ford Escape vehicles manufactured April 15, 2014, to May 8, 2014, and 2015 Lincoln MKC vehicles manufactured April 21, 2014, to May 15, 2014. On April 30, 2015, Ford expanded the recall to cover an additional 45,505 vehicles, including certain model year 2014-2015 Ford Transit Connect vehicles manufactured November 11, 2013, to August 29, 2014, 2014-2015 Ford Fiesta vehicles manufactured April 10, 2014, to June 17, 2014 and 2014 Ford Edge vehicles manufactured April 30, 2014, to May 21, 2014. Improper nickel plating of components within the fuel pump may result in the fuel pump failing.

Consequence & remedy

Consequence: If the fuel pump fails, the vehicle may stall without warning, increasing the risk of a crash.

Remedy: Ford will notify owners, and dealers will replace the fuel pump, free of charge. The recall began on February 27, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S30.

14V393000 · Power Train:axle Assembly:axle Shaft

Jul 2, 2014

Ford Motor Company (Ford) is recalling certain model year 2012-2014 Ford Edge and Lincoln MKX vehicles manufactured September 2, 2010, to November 30, 2013; 2013-2014 Ford Taurus and Lincoln MKS vehicles manufactured August 25, 2011, to November 30, 2013; and 2013-2014 Ford Flex and Lincoln MKT vehicles manufactured September 12, 2011, to November 30, 2013. In the affected vehicles, the halfshaft retention circlip may not have been properly installed, and as a result, the halfshaft may move outward and disengage from the linkshaft while driving and without prior warning.

Consequence & remedy

Consequence: If the halfshaft and linkshaft become disengaged while driving, power will no longer be transmitted to the wheels, increasing the risk of a vehicle crash. Additionally, if the parking brake is not applied before exiting the vehicle, the vehicle may roll away despite the transmission being placed in 'Park', increasing the risk of injury to exiting occupants and bystanders.

Remedy: Ford will notify owners, and dealers will inspect the vehicles to make sure that the halfshaft is properly retained. If it is not, dealers will replace the linkshaft and also replace the halfshaft if it shows evidence of spline damage, free of charge. The recall began on August 4, 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S10.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

PE15020 · Wheel Separation

Opened May 20, 2015 · Closed Jan 4, 2016

Status: closed (inferred from source dates) · Wheels:rim

On November 29, 2014, ODI received a complaint reporting the complete separation of an original equipment 22-inch alloy wheel rim mounted on the right front position of a model year 2014 Ford Edge vehicle (VOQ 10661278).The driver indicated that the right-front corner of the vehicle suddenly dropped while driving, causing the vehicle to go off the road to the right and into a field.The right-front wheel rim was found to have broken into two pieces. The owner said that there was no prior warning or wheel related problems with the vehicle. The vehicle had been driven approximately 8,500 miles at the time of the incident.On May 29, 2015 ODI sent an information request to Ford asking for detailed information related to the specific 22 inch alloy wheel used on the Edge as well as any peer vehicles which used the same type of wheel.On July 17, 2015 Ford provided ODI with the requested information. Ford's search showed that the single incident reported to ODI is the only instance of a wheel failure on the subject or peer vehicles.The failed wheel was sent to the National Transportation Service Board (NTSB) materials analysis laboratory for examination. The NTSB determined that the wheel failed because of a severe impact that caused a crack that rapidly propagated around the circumference of the wheel, The rim fracture surface had a predominantly rough appearance consistent with an overstress fracture (rapid fracture)There were no abnormalities or unique features associated with the fracture initiation site.Metallurgical analysis of the rim found that the material was within specification and no anomalies were identified that could have contributed to the failure.See the full NTSB report for more details.Based on the absence of additional failures and the results of the wheel material testing and failure analysis, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency will continue to monitor complaints and other information relating to the alleged defect in the subject vehicles and take further action in the future if warranted.The following VOQ is associated with this investigation: 10661278