On three separate occasions, the brake pedal has gone all the way to the floor, with braking power reduced to a scary, dangerous level. An independent mechanic ran a diagnostic scan on one of those occasions and received an ABS Module fault. They bled the system, and the brakes worked well (fault went away) -- until the next inc…
Read full complaint
On three separate occasions, the brake pedal has gone all the way to the floor, with braking power reduced to a scary, dangerous level. An independent mechanic ran a diagnostic scan on one of those occasions and received an ABS Module fault. They bled the system, and the brakes worked well (fault went away) -- until the next incident, in which the car decided to randomly 'fix' itself about 20 minutes later. Independent shop and the dealership performed in-depth inspections of the entire braking system and could not find the issue. This hydraulic failure is a documented safety problem on other Edge models and should be the subject of a recall for the 2014 Ford Edge.
NHTSA ODI #11736795
Mileage unknown · Apr 17, 2026
Service Brakes
Brake pedal felt mushy, took vehicle to repair shop and had master cylinder replaced. Problem persisted so took vehicle to a different repair shop and had brake booster replaced. Pedal felt firmer but then a hissing sound could be heard while driving without using brakes. Had brake booster replaced again as well as the vacuum ho…
Read full complaint
Brake pedal felt mushy, took vehicle to repair shop and had master cylinder replaced. Problem persisted so took vehicle to a different repair shop and had brake booster replaced. Pedal felt firmer but then a hissing sound could be heard while driving without using brakes. Had brake booster replaced again as well as the vacuum hose connected to booster. Now Pedal goes all the way the floor requiring excessive pressure to stop vehicle and a high pitched hissing sound is heard when applying pressure to brake pedal. Hissing sound still present while car in motion without touching brakes. Vehicle had to be put into neutral to stop. Backing out of driveway, vehicle continues to roll slightly even when Pedal pushed to floor. Mo warning lights have ever come on and brake fluid reservoir needs frequent additions of fluid.
NHTSA ODI #11731754
Mileage unknown · Jan 29, 2026
Service Brakes
Ford has the abs valve on back order for over 700 vehicles with no delivery date in sight. The vehicles are worthless at this point because they can’t be fixed or driven safely.
NHTSA ODI #11714261
Mileage unknown · Jan 19, 2026
Service Brakes
In busy traffic brake pedal went all the way to floor almost causing me to hit vehicle in front of me. Vehicle was towed to my mechanic at which time he informed me this is an ongoing issue with Ford and is recall issue. I have contacted my local Ford dealer as well as Ford Motor company and filed a claim.Vehicle has not been r…
Read full complaint
In busy traffic brake pedal went all the way to floor almost causing me to hit vehicle in front of me. Vehicle was towed to my mechanic at which time he informed me this is an ongoing issue with Ford and is recall issue. I have contacted my local Ford dealer as well as Ford Motor company and filed a claim.Vehicle has not been repaired. I hope sooner than later Ford will acknowledge this ongoing issue as this is a very catastrophic loss!!
NHTSA ODI #11711812
Mileage unknown · Jan 15, 2026
Service Brakes
My ABS module/ hydraulic control unit isn’t working . My ford dealership, Autonation Lincoln Clearwater, could not find a replacement and were told that they weren’t making them anymore . I found that there were recalls on years 2015 and 2016
NHTSA ODI #11711106
Mileage unknown · Nov 25, 2025
Service Brakes
I am an automotive service technology teacher, retired. The ABS system on this vehicle failed without warning and without any trouble codes. No lights, no codes. The pedal sinks nearly to the floor, but does engage the brakes once the ABS chambers fill with fluid. But, by the time brakes begin to engage, one's heart skips a be…
Read full complaint
I am an automotive service technology teacher, retired. The ABS system on this vehicle failed without warning and without any trouble codes. No lights, no codes. The pedal sinks nearly to the floor, but does engage the brakes once the ABS chambers fill with fluid. But, by the time brakes begin to engage, one's heart skips a beat and it actually takes 1/2 second longer for the brakes to actually work. If not for my tall stature, I might not be able to reach the distance it takes to get hydraulic pressure. Brakes work, but marginally due to interference with floor. My research indicates this is a relatively common problem with these vehicles. Folks need to be warned! A recall is in order; at the very least a service bulletin and a customer notification. I'll fix it, but I shouldn't need to. I'll save the old unit and ship it if anybody wants to inspect it.
NHTSA ODI #11701585
Mileage unknown · Sep 22, 2025
Air BagsService BrakesUnknown Or OtherCrash
I purchased my 2014 Ford Edge in December 2023. March 2023, I started having issues with the driver side door lock sensor malfunction as shown in the last photo. The door would not automatically lock when I started driving, sensing that the driver’s side door was still open. It was not. I kept pushing the lock button to lock it,…
Read full complaint
I purchased my 2014 Ford Edge in December 2023. March 2023, I started having issues with the driver side door lock sensor malfunction as shown in the last photo. The door would not automatically lock when I started driving, sensing that the driver’s side door was still open. It was not. I kept pushing the lock button to lock it, but it kept unlocking even while driving. Eventually it would lock. The cost to fix that was around $600 which I could not afford, and my limited warranty expired. July/August 2025 my ABS and traction control sensor lights were lit on my dash. I took the car for service and my very reputable mechanic diagnosed with no codes showing up a few times. Performed a reset twice and the lights came back on after only driving a couple of miles. He contacted Ford who advised he couldn't sell the part because there was a "national hold" on the part. On 9/2 my brakes and traction control failed resulting me rear ending another vehicle. The other safety issue is that my airbags did not deploy upon the collision. I contacted Ford Corporation and was advised that Ford will not do anything since my vehicle was older than 10 years. The vehicle is a total loss leaving me with a loan balance of approximately $4,700.00. This is neither fair nor right for a multimillion-dollar company that will not or choose not to address or acknowledge their responsibility regarding these two very serious safety issues. Since I didn’t die or get seriously hurt, I guess it’s not that big a deal to Ford.
NHTSA ODI #11688877
Mileage unknown · Sep 13, 2025
Service Brakes
Abs module failed
NHTSA ODI #11687113
Mileage unknown · Aug 19, 2025
Forward Collision AvoidanceService Brakes
My vehicle started having a "spongy" pedal feel when I pushed on my brakes going to work and returning home. I was going to be taking my grandchildren to Branson, MO, on Thursday morning, [XXX], and was able to get Marvin Merritt, mechanic, to look at my vehicle before leaving to make sure we would be okay traveling. Marvin n…
Read full complaint
My vehicle started having a "spongy" pedal feel when I pushed on my brakes going to work and returning home. I was going to be taking my grandchildren to Branson, MO, on Thursday morning, [XXX], and was able to get Marvin Merritt, mechanic, to look at my vehicle before leaving to make sure we would be okay traveling. Marvin notified me that my brake booster needed replace and it was not safe to travel. I made other arrangements to go to Branson. When I got back I paid Marvin for services rendered and got my letter from the Ford Motor Company Dated March 2024. I took my letter, the invoice from Marvin Merritt and turned it into Friendly Ford Dealership / Service man, Derrick and he filed a claim for me and said he did not see any reason why they would deny my claim based on the information I turned in. I waited 4 week, calling weekly for updates, before being told my claim was being denied. Derrick gave me the following number to call 1-800-392-3673 and they stated they would not honor the warrenty because it was not fixed at a Ford Dealership. I asked for an email or mailing address so I could send my information to them and was denied. She stated she would give me a claim number which was case # [XXX]. and I shared the following information on the phone. 1.“I received Ford’s March 2024 letter stating that if my vehicle had exceeded 150,000 miles, coverage would continue through November 30, 2025. My vehicle had exceeded that mileage, so I relied on this written coverage.” 2.“I had the brake booster repaired on July 11, 2025—well within the coverage period Ford outlined. Despite this, my claim was denied.” 3.“I am requesting Ford to honor its written commitment and reimburse the cost of my repair. Given that this matter involves a brake system safety issue, I trust Ford will resolve this promptly. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Ford Motor Company (Ford) is recalling certain 2014-2016 Explorer, 2014-2015 Taurus and 2014 Edge vehicles equipped with 2.0L or 2.3L engines and front wheel drive. The support bracket for the front drive axle halfshaft may fail.
Consequence & remedy
Consequence: The failed bracket could result in a loss of park function which can cause unintended vehicle movement, and loss of motive power while driving which increases the risk of a crash.
Remedy: Ford will notify owners, and dealers will replace the link shaft bracket, free of charge. Parts are not currently available. Owners received an interim notification detailing safety risk December 8, 2020. A second letter will be mailed when parts become available in January 2021. The recall began February 2, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S63.
Ford Motor Company (Ford) notified the agency on January 8, 2015, that they are recalling certain model year 2014 Ford Escape vehicles manufactured April 15, 2014, to May 8, 2014, and 2015 Lincoln MKC vehicles manufactured April 21, 2014, to May 15, 2014. On April 30, 2015, Ford expanded the recall to cover an additional 45,505 vehicles, including certain model year 2014-2015 Ford Transit Connect vehicles manufactured November 11, 2013, to August 29, 2014, 2014-2015 Ford Fiesta vehicles manufactured April 10, 2014, to June 17, 2014 and 2014 Ford Edge vehicles manufactured April 30, 2014, to May 21, 2014. Improper nickel plating of components within the fuel pump may result in the fuel pump failing.
Consequence & remedy
Consequence: If the fuel pump fails, the vehicle may stall without warning, increasing the risk of a crash.
Remedy: Ford will notify owners, and dealers will replace the fuel pump, free of charge. The recall began on February 27, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S30.
Ford Motor Company (Ford) is recalling certain model year 2012-2014 Ford Edge and Lincoln MKX vehicles manufactured September 2, 2010, to November 30, 2013; 2013-2014 Ford Taurus and Lincoln MKS vehicles manufactured August 25, 2011, to November 30, 2013; and 2013-2014 Ford Flex and Lincoln MKT vehicles manufactured September 12, 2011, to November 30, 2013. In the affected vehicles, the halfshaft retention circlip may not have been properly installed, and as a result, the halfshaft may move outward and disengage from the linkshaft while driving and without prior warning.
Consequence & remedy
Consequence: If the halfshaft and linkshaft become disengaged while driving, power will no longer be transmitted to the wheels, increasing the risk of a vehicle crash. Additionally, if the parking brake is not applied before exiting the vehicle, the vehicle may roll away despite the transmission being placed in 'Park', increasing the risk of injury to exiting occupants and bystanders.
Remedy: Ford will notify owners, and dealers will inspect the vehicles to make sure that the halfshaft is properly retained. If it is not, dealers will replace the linkshaft and also replace the halfshaft if it shows evidence of spline damage, free of charge. The recall began on August 4, 2014. Owners may contact Ford customer service at 1-800-392-3673. Ford's number for this recall is 14S10.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
PE15020 · Wheel Separation
Opened May 20, 2015 · Closed Jan 4, 2016
Status: closed (inferred from source dates) · Wheels:rim
On November 29, 2014, ODI received a complaint reporting the complete separation of an original equipment 22-inch alloy wheel rim mounted on the right front position of a model year 2014 Ford Edge vehicle (VOQ 10661278).The driver indicated that the right-front corner of the vehicle suddenly dropped while driving, causing the vehicle to go off the road to the right and into a field.The right-front wheel rim was found to have broken into two pieces. The owner said that there was no prior warning or wheel related problems with the vehicle. The vehicle had been driven approximately 8,500 miles at the time of the incident.On May 29, 2015 ODI sent an information request to Ford asking for detailed information related to the specific 22 inch alloy wheel used on the Edge as well as any peer vehicles which used the same type of wheel.On July 17, 2015 Ford provided ODI with the requested information. Ford's search showed that the single incident reported to ODI is the only instance of a wheel failure on the subject or peer vehicles.The failed wheel was sent to the National Transportation Service Board (NTSB) materials analysis laboratory for examination. The NTSB determined that the wheel failed because of a severe impact that caused a crack that rapidly propagated around the circumference of the wheel, The rim fracture surface had a predominantly rough appearance consistent with an overstress fracture (rapid fracture)There were no abnormalities or unique features associated with the fracture initiation site.Metallurgical analysis of the rim found that the material was within specification and no anomalies were identified that could have contributed to the failure.See the full NTSB report for more details.Based on the absence of additional failures and the results of the wheel material testing and failure analysis, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency will continue to monitor complaints and other information relating to the alleged defect in the subject vehicles and take further action in the future if warranted.The following VOQ is associated with this investigation: 10661278
2014 Ford Edge Problems, Complaints & Recalls | Skip That Year