IllustrationThe switch to start the vehicle has to be pushed down and turned at the same time. Vehicle starts but shuts the engine down when the key returns sometimes. On one occasion vehicle shut down while driving.
2012 Dodge RAM 2500
Owner reports · Recalls · Investigations
Similar to other model years
Owner complaints for the 2012 Dodge RAM 2500 do not stand out strongly from the model-year median of 275.
About this comparison →How this year compares
Owner complaints by model year
Compare all RAM 2500 years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
390–25K
4625–50K
3050–75K
2275–100K
20100–150K
22150K+
179 reports with mileage · 104 unknown
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Steering. Review the 109 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 51 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 44 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
8 crash reports12 fire reports4 injury reports
What owners actually said
283 reportsWe purchased our 2012 Dodge Ram heavy duty with tow package new. At just over 152000 miles, the engine started knocking while on vacation. We were not towing at the time. We put in injector cleaner to try and help the knocking. During our vacation, we were on the freeway when we suddenly lost power, the service engine light popp…
Read full complaint
We purchased our 2012 Dodge Ram heavy duty with tow package new. At just over 152000 miles, the engine started knocking while on vacation. We were not towing at the time. We put in injector cleaner to try and help the knocking. During our vacation, we were on the freeway when we suddenly lost power, the service engine light popped on, and the engine died. We were literally driving one minute and the next were trying to get out of the traffic lane with no control. We restarted the engine, the knocking had stopped and power was restored. Two days later, another episode of power decrease but with no engine service light. We used premium gas, injector cleaner and listened for the knocking that came and went, to drive home. We were told by our local dealership it is a lifter failure and the truck needs a replacement engine.
My passenger headlights keeps going in and out. The wiring harness has been replaced twice and it still does it. My check engine light keeps coming on for the evap system even though its been replaced.
Our 2012 RAM 2500 truck with 135k miles, had it's fuel tank fail. The dealership in Oak Ridge, TN tested the vehicle and found that the gas tank tubes were broken causing us to not be able to fill the tank. The dealership recommended "NEED TO REPLACE GAS TANK". Mopar aka Stellantis does not make the fuel tank anymore, the "r…
Read full complaint
Our 2012 RAM 2500 truck with 135k miles, had it's fuel tank fail. The dealership in Oak Ridge, TN tested the vehicle and found that the gas tank tubes were broken causing us to not be able to fill the tank. The dealership recommended "NEED TO REPLACE GAS TANK". Mopar aka Stellantis does not make the fuel tank anymore, the "replacement" fuel tank does not work (completely wrong configuration), there is not an aftermarket tank. We have a Million Mile bumper to bumper warranty with MOPAR. "Customer Care" does not care.
Recall T79 or 17V-821 or break transmission shift pin stuck in open position. This is the 2nd time this has happened and serious damage has occurred to the vehicle. Dodge won't do anything about it. Vehicle was parked, turned off, no key. I came out of building and it shifted into gear on its own and rolled backwards into a pol…
Read full complaint
Recall T79 or 17V-821 or break transmission shift pin stuck in open position. This is the 2nd time this has happened and serious damage has occurred to the vehicle. Dodge won't do anything about it. Vehicle was parked, turned off, no key. I came out of building and it shifted into gear on its own and rolled backwards into a pole.
The contact owns a 2012 Ram 2500. The contact stated while driving at an undisclosed speed, the vehicle drove over a bump in the roadway and started to shake violently. The vehicle was taken to an independent mechanic where it was determined that the reinforcement bracket over the front track bar bracket had failed and needed to…
Read full complaint
The contact owns a 2012 Ram 2500. The contact stated while driving at an undisclosed speed, the vehicle drove over a bump in the roadway and started to shake violently. The vehicle was taken to an independent mechanic where it was determined that the reinforcement bracket over the front track bar bracket had failed and needed to be replaced. The vehicle was repaired; however, the failure recurred. Neither the dealer nor the manufacturer were notified of the failure. The failure mileage was approximately 205,000.
The contact owns a 2012 Ram 2500. The contact stated while the vehicle was parked, the vehicle rolled away. The contact was standing near the vehicle with the key fob. There were no warning lights illuminated. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The contact related the failure to NHTSA …
Read full complaint
The contact owns a 2012 Ram 2500. The contact stated while the vehicle was parked, the vehicle rolled away. The contact was standing near the vehicle with the key fob. There were no warning lights illuminated. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The contact related the failure to NHTSA Campaign Number: 17V821000 (Power Train). The manufacturer was not contacted. The failure mileage was approximately 220,000.
The contact owns a 2012 Ram 2500. The contact stated the vehicle failed to start intermittently. The contact also stated that the air bag warning light was illuminated. The vehicle was taken to the local dealer and the dealer was made aware of the failure. The vehicle was not repaired. The manufacturer had not been informed of t…
Read full complaint
The contact owns a 2012 Ram 2500. The contact stated the vehicle failed to start intermittently. The contact also stated that the air bag warning light was illuminated. The vehicle was taken to the local dealer and the dealer was made aware of the failure. The vehicle was not repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 168,000.
I purchased a pair of Treadwright warden tires for the rear of my wife’s truck. In less than 100 miles the tread separated from the casing on one of the tires. I caught it before it completely blew out and have pictures. The replacement they sent has a blown sidewall. I mounted it and a bubble started to form that was 1/2” high …
Read full complaint
I purchased a pair of Treadwright warden tires for the rear of my wife’s truck. In less than 100 miles the tread separated from the casing on one of the tires. I caught it before it completely blew out and have pictures. The replacement they sent has a blown sidewall. I mounted it and a bubble started to form that was 1/2” high and 3” around with just 20psi, operating PSI for the tire is 80PSI. I immediately stopped inflation and contacted Treadwright. They tried to convince me that it was “overlap” and safe to use. I told them it is not over lap and showed them multiple pictures of the tire from different angles to prove it has a blown belt. They still insisted it was a serviceable tire. It’s not and I have pictures. I’ve used Treadwright tires for the last 5 or so years. Over the last year and a half to 2 years I’ve received 6 defective tires. All defects were fatal defects, all being broken belts. That’s 1 out of every 4.5 tires purchased. If I’ve received that many fault tires I can be the only one. On top of that the insistence of Treadwright trying to convince people to use fatally defective tires is negligent, reckless and dangerous.
While driving, my dodge shut off and it was hard to control my vehicle and come to a safe stop, out of the way of other motorists. Lost all power, as if I turned the key off while driving. Turns out that there is a weak/loss of connection in the WIN module. while the vehicle is running at idle, the truck will shut off as if I tu…
Read full complaint
While driving, my dodge shut off and it was hard to control my vehicle and come to a safe stop, out of the way of other motorists. Lost all power, as if I turned the key off while driving. Turns out that there is a weak/loss of connection in the WIN module. while the vehicle is running at idle, the truck will shut off as if I turned the key to the off position. This is dangerous and scary. There was no warning or heads up or any issues prior to this incident.
Official recalls
417V821000 · Power Train:automatic Transmission:lever And Linkage:column Shift
Dec 20, 2017
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the vehicle is running and in PARK may cause the Brake Transmission Shift Interlock (BTSI) pin to stick in the open position. With the pin in the open position, the transmission can be shifted out of PARK into any gear without pushing the brake pedal or having the key in the ignition.
Consequence & remedy
Consequence: Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy: Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
15V459000 · Air Bags:frontal
Jul 22, 2015
Chrysler (FCA US LLC) is recalling certain model year 2012-2014 Ram 1500, 2500, 3500, 4500, and 5500 trucks manufactured January 18, 2011, to October 7, 2014, and equipped with the Electronic Vehicle Information Center option. The affected vehicles have a steering wheel wiring harness that may rub against the driver air bag module retainer spring.
Consequence & remedy
Consequence: This abrasion may result in an electrical short that could cause driver's frontal air bag to unexpectedly deploy. Inadvertent deployment of the air bag may increase the risk of injury and the possibility of a vehicle crash.
Remedy: Chrysler will notify owners, and dealers will inspect, repair as necessary, and secure the steering wheel wiring harness. Additionally, protective caps will be added to the air bag retainer spring ends. These repairs will be done free of charge. The recall began on September 18, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R36.
14V635000 · Engine And Engine Cooling:engine:diesel; Fuel System, Diesel
Oct 8, 2014
Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.
Consequence & remedy
Consequence: If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The recall began on April 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P65.
Additional source detail variants (2)
Fuel System, Diesel
Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.
Consequence: If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The recall began on April 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P65.
Engine And Engine Cooling:engine:diesel
Chrysler Group LLC (Chrysler) is recalling certain model year 2010-2014 Ram 2500, 3500, 4500, and 5500 trucks manufactured March 27, 2009, to September 5, 2013. In the affected vehicles, the electrical connectors of the diesel fuel heater may overheat.
Consequence: If the connectors overheat, the fuel heater may leak fuel, increasing the risk of a fire.
Remedy: Chrysler will notify owners, and dealers will replace the harness side connector with a silver plated beryllium copper terminal service kit, and inspect the fuel heater for leaks, replacing it as necessary, free of charge. Chrysler issued interim notification to owners on December 8, 2014. The recall began on April 27, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P65.
13V529000 · Steering:linkages:tie Rod Assembly
Nov 6, 2013
Chrysler Group LLC (Chrysler) is recalling certain model year 2008-2012 RAM 2500 4X4 and 3500 4X4 trucks, 2008-2012 Dodge RAM 3500 4x2 Cab Chassis, and model year 2008 Dodge RAM 1500 Mega Cab 4x4. The left tie rod assembly may break.
Consequence & remedy
Consequence: A failure of the tie rod assembly may result in a loss of steering control, increasing the risk of a crash.
Remedy: Chrysler notified owners on January 16, 2014 that dealers would inspect vehicles and replace the steering linkage assembly, if necessary. On or about February 27, 2014, Chrysler ceased its recall remedy program due to parts quality concerns, and then re-initiated it on or about April 14, 2014. In July 2015, and under a consent order with NHTSA, the company agreed to offer owners three options for remedying their vehicles: perform the original remedy, offer to repurchase the vehicle at the fair market value plus 10%, or offer an additional incentive offer towards the purchase of a new Dodge, Jeep, Chrysler, or Fiat vehicle. Chrysler will notify owners of the new recall options in a letter expected to be mailed on August 31, 2015. Owners may contact Chrysler at 1-800-247-9753. Chrysler's recall campaign number is N49.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA19001 · Electrical Overstress
Opened Apr 19, 2019 · Closed Sep 19, 2024
Status: closed (inferred from source dates) · Air Bags: Air Bag/restraint Control Module
The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mounted in the vehicle and deploys the vehicle air bags and seat belt pretensioners in accordance with manufacturer design specifications. The ECU in the subject vehicles contains a model DS84 application-specific integrated circuit (ASIC) which controls the communication of the crash sensor signal, firing commands (i.e., when to deploy the airbag(s) and/or pretensioners), and fault information (e.g., diagnostic trouble codes). In September 2016, FCA announced recall 16V-668 for certain model year (MY) 2010 to 2014 Chrysler, Dodge and Jeep products manufactured with the subject ZF-TRW ACU. In this recall, FCA discussed an EOS condition that resulted in a failure of the subject DS84 ASIC, which caused air bag non-deployment. FCA noted that the defect condition had only been observed in vehicles equipped with sensor harnessing routed across the front of the vehicle. Other FCA vehicles that also used the subject ACU, but were not equipped with cross-car harnessing, had not experienced EOS failures, despite similar time in service. During the course of this investigation, ODI sent two separate Information Request (IR) letters to six vehicle manufactures (including FCA, Hyundai, Honda, Kia, Mitsubishi, and Toyota) and one IR letter to ZF-TRW. These IR letters resulted in ODI receiving comprehensive data from these manufacturers and suppliers. Studies of this data found that the DS84 ASIC does not have sufficient protection against negative electrical transients or electrical overstress (“EOS”) that can be generated in certain severe crashes. An electrical transient occurs when the electrical power supplied to a circuit changes momentarily over a short duration of time. In these severe crash cases, the crash sensors and other powered wiring can be damaged and short circuited so as to create a negative electrical transient of sufficient intensity and duration (that are outside the vehicle manufacturer's specification) to damage the ASIC before the restraint device deployment signal is received by the SRS ECU. This damaged signal can lead to incomplete or nondeployment of the air bags and/or pretensioners. Airbag non-deployment and/or lack of pretensioner operation can increase the risk or severity of injury in a crash.A total of 8 fatalities and 14 injuries were associated with known EOS events. The common element in all investigated manufacturers vehicles is the SRS ECU containing a DS84 ASIC manufactured by ZF-TRW. The risk associated with the ASIC is equally shared among all OEMS involved in the investigation. The actual real-world risk can be mitigated by other factors which were assessed by ODI during this investigation. The first mitigating factor involves protections built into the ACU design which protect the DS84 ASIC from damage. There are multiple strategies and levels of protection employed by different OEMs that provide effective EOS mitigation. The two most common strategies at the ACU level are circuit protection diodes on the remote senor signal lines, and current limiting resistors that protect critical components. The second mitigating factor is found at the vehicle level and involves the location and routing of the wires leading from the crash sensors to the SRS ECU. If the wires are well protected in a crash and are not routed with other power wires carrying large currents, the risk for an EOS event is significantly reduced or eliminated. These design specific factors combine to produce a spectrum of risk for the vehicles equipped with ACUs using the DS84 ASIC. Given the many of years of field exposure, it is possible to divide the subject population into two groups; vehicles which have experienced EOS events, and vehicles which have not experienced EOS field events. Four of the six OEMs involved in this investigation have experienced EOS field events on at least one of their models equipped with a DS84 ASIC. All vehicle models (including the Toyota models identified in the Failure Report Summary of the opening resume for this investigation) with field events have been recalled. In an abundance of caution, ODI kept this investigation open five years to monitor field performance and did not identify any field events on vehicles not included in existing safety recalls. Given the spectrum of risk identified in this investigation and that all vehicles with a demonstrated unreasonable risk have been recalled, ODI is closing this investigation. ODI is closing this investigation with the following manufacturer safety recalls: 16V-668, 18E-043, 18V-137, 18V-363, and 20V-024. With the recall actions taken by the subject vehicle and equipment manufacturers, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exists on other model or model year vehicles outside of the recall scopes. The agency reserves the right to take further action if warranted by the circumstances.