2018 Audi A4

A vehicle diagnostic scan dated 04/15/2026 showed electrical communication faults involving vehicle control modules. The scan showed U014100, described as “Lost Communication With Body Control Module ‘A’,” with status listed as passive/sporadic. The scan also showed U112100, described as “Data bus message missing,” with status listed as active/static. This is being reported as a safety concern because body-control module, gateway, and data-bus communication faults can affect vehicle electrical functions, warning systems, access/locking systems, lighting or body-control functions, driver information, and other vehicle systems that rely on module communication. The concern is especially important because the vehicle has had multiple intermittent electrical/body-control symptoms, including fuel-door/tank-flap electrical faults and other reported intermittent vehicle electrical concerns. No crash, fire, injury, or fatality occurred. The vehicle/component is available for inspection, and the diagnostic scan report, electrical-system records, service communications, and related repair records are available if requested.

The vehicle has a recurring interior rattle / loose-trim concern involving interior panels, trim, speaker/subwoofer area, rear shelf, dashboard area, or related mounting components. The noise is not merely a comfort concern if it is caused by a loose component, fastener, grille, panel, or speaker housing that may move, worsen, detach, or distract the driver. This is being reported as a safety concern because loose interior trim or components can distract the driver, interfere with normal vehicle use, create uncertainty about whether a component is secured, and may indicate improper fastening, panel fitment, speaker/subwoofer mounting, or body/electrical component installation issues. If the affected trim is near safety-system areas, it should be inspected to confirm it does not affect wiring, restraint-system areas, visibility, or safe vehicle operation. No crash, fire, injury, or fatality occurred. The vehicle/component is available for inspection, and service records, TSB-related records, photos/video/audio, issue lists, and repair communications are available if requested.

The fuel filler door/gas door intermittently fails to open, preventing normal access to the fuel filler area. This appears to involve the fuel door latch, release mechanism, lock actuator, body component, electrical control, or related wiring/module issue. This is being reported as a safety concern because inability to open the fuel door can prevent refueling when fuel is low. If the vehicle cannot be refueled, it can create a stranding risk or loss-of-propulsion risk, including in traffic, at night, on a highway, or in an unsafe location. The issue also creates driver distraction and uncertainty because refueling access is not reliable. No crash, fire, injury, or fatality occurred. The vehicle/component is available for inspection, and photos/video, service communications, and repair records are available if requested.

The sunroof has a recurring mechanical/electrical malfunction. During operation, the sunroof binds and makes a loud popping or cracking noise, and the rubber seal became torn or damaged. This suggests a possible track, guide, cable, motor, regulator, frame, seal, or alignment failure. This is being reported as a safety concern because a binding or popping sunroof can distract the driver, allow water intrusion into electrical areas, worsen into glass/track/frame failure, or create a risk of loose roof components while the vehicle is in use. The issue was reported to Audi service and was not fully resolved or documented to my satisfaction. No crash, fire, injury, or fatality occurred. The vehicle/component is available for inspection, and photos, video stills, service communications, and repair records are available.

Visible wiring has become exposed in the windshield/A-pillar area. There is no airbag/SRS warning light at this time, and I am not able to determine from visual inspection whether the exposed wiring is related to the restraint system. However, this is a safety-sensitive area because it can contain or route electrical wiring near trim, sensors, and safety-system areas. Exposed or unsecured wiring in this area may create a risk of electrical short, damaged wiring, impaired signal integrity, loose trim, moisture intrusion, or safety-system malfunction. The concern was reported as part of broader electrical and safety-related issues. No crash, fire, injury, or fatality occurred. This complaint is being submitted because exposed wiring in the A-pillar/windshield-pillar area is not normal and should be inspected to determine whether the wiring, trim, connector routing, or related electrical/safety components are compromised. The vehicle/component is available for inspection, and photo evidence and service communications are available.