← New search

2023 Acura Integra

Owner reports · Recalls · Investigations

More warning signs than most Integra years

Owner complaints for the 2023 Acura Integra are substantially higher than the model-year median of 21.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all Integra years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 4 of 207 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Steering. Review the 188 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Lane Departure. Review the 12 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Engine. Review the 5 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

5 crash reports0 fire reports2 injury reports

Service Brakes complaints

3 reports
Clear category filter
Mileage unknown · Jun 19, 2025
Service Brakes

Keep having problems with brakes after taking the vehicle in to the dealership multiple times. They are generating a noise every time I hit the brake.

NHTSA ODI #11667919

Mileage unknown · Apr 1, 2025
Electrical SystemService BrakesUnknown Or Other

The brakes squeak and squeal loudly when the car is cold and reversing. I took it to the acura dealership that I bought it from to get it looked at. They were able to reproduce the sound and said the sound was coming from the vsa (vehicle stability assist) . They compared it to a "known good vehicle" and said it made the same no…

Read full complaint

The brakes squeak and squeal loudly when the car is cold and reversing. I took it to the acura dealership that I bought it from to get it looked at. They were able to reproduce the sound and said the sound was coming from the vsa (vehicle stability assist) . They compared it to a "known good vehicle" and said it made the same noise. Essentially the dealer said all cars of similar make and model have this issue and make this noise so no repairs were done or necessary. See attached document

NHTSA ODI #11651935

Mileage unknown · Dec 20, 2023
Service Brakes

Brake pedal has to travel almost to the floor to gain braking traction. Feels like the brakes have 50K miles on them. Car has 7,500 miles currently. Matches the current recall. Dealer would not look at or fix due to my VIN number didn't match up in the recall.

NHTSA ODI #11561226

Official recalls

2

24V744000 · Steering

Oct 3, 2024

Honda (American Honda Motor Co.) is recalling certain 2023-2025 Acura Integra, Civic Type R, CR-V Hybrid, CR-V, HR-V, 2022-2025 Civic, Civic Hatchback, 2024-2025 Acura Integra Type S, 2025 CR-V Fuel Cell EV, Civic Hybrid, and Civic Hatchback Hybrid vehicles. The steering gearbox assembly may have been manufactured incorrectly, which can cause excessive internal friction and lead to difficulty steering the vehicle.

Consequence & remedy

Consequence: Difficulty steering can increase the risk of a crash.

Remedy: Dealers will replace the worm gear spring and redistribute or add grease as necessary, free of charge. Owner notification letters were mailed November 18, 2024. Owners may contact Honda Customer Service at 1-888-234-2138. Honda's numbers for this recall are SJS, MJU, QJT and VJV.

23V430000 · Service Brakes, Hydraulic:antilock/traction Control/electronic Limited Slip:control Unit/module

Jun 15, 2023

Honda (America Honda Motor Co.) is recalling certain 2023 Civic, Acura RDX, Acura Integra, and 2022 Honda Accord vehicles. A ball valve in the vehicle stability assist (VSA) modulator may leak brake fluid, which can result in unintended vehicle movement when the brake hold feature is engaged or an unexpected increase in brake pedal travel.

Consequence & remedy

Consequence: Unintended vehicle movement or an unexpected increase in brake pedal travel can increase the risk of a crash or injury.

Remedy: Dealers will replace the VSA modulator, free of charge. Owner notification letters were mailed July 24, 2023. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are OEJ, XEK, AEY, XEX and OEW.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

EA23003 · Momentary Increased Steering Effort

Opened Nov 29, 2023 · Closed Jan 28, 2025

Status: closed (inferred from source dates) · Steering

On November 29, 2023, the Office of Defects Investigation (ODI) opened this Engineering Analysis (EA23003) to assess allegations of momentary increase in steering effort in model years (MY) 2022-2023 Honda Civic, 2023MY Honda CR-V, and 2023MY Acura Integra vehicles (subject vehicles). The complaints received by ODI alleged that the subject vehicles experienced a momentary increase in required steering effort (described as “sticky steering”) occurring mostly at highway speeds after driving for an extended amount of time; these complaints could not be duplicated during dealer service technicians’ quick test drives.  The complaints had been received over the previous two years with most occurring with low vehicle mileage. The steering gear of these vehicles is aided by an electrical power assist unit. This power assist unit inputs force on the steering rack via a worm gear and worm wheel assembly. During PE23005, Honda stated this condition of momentary increase in steering effort occurs due to two factors within this power assist unit. First, during manufacturing, the steering worm wheel goes through annealing and component conditioning processes. These processes cause internal stress and strain within the steering worm  wheel. This strain is slowly released over the first few months of the vehicle life. Over time, the released strain causes deformation of the teeth on the worm wheel, causing the worm gear to catch on the worm wheel. This catching results in the driver’s momentary increased steering effort. Second, the manufacturing process did not guarantee consistent grease application and, therefore, some subject vehicles received insufficient grease which contributed to the momentary increase in steering effort. During EA23003, ODI further analyzed the potential safety related consequences of the momentary increase in steering effort. NHTSA’s Vehicle Research and Test Center (VRTC) duplicated the allegations of increased steering effort. In addition, VRTC discovered the steering worm wheel and worm gear tended to push grease out of the meshing area, resulting in large amounts of grease resting on top of the worm wheel. Information Request responses collected and reviewed by ODI showed Honda had also discovered this additional root cause during NHTSA’s EA. In addition, Honda discovered the preload of the worm wheel gear spring was set too high, increasing the gear slide load and resulting in higher friction and increased torque fluctuation when steering. The number of consumer complaints made to ODI continued to increase with the expansion of scope from the PE to the EA. Additionally, during EA23003, ODI received ten complaints alleging a crash, in addition to the 13 complaints ODI had received as of the time it opened EA23003. In total, 23 crashes have been reported to ODI due to this alleged defect. On October 3, 2024, Honda filed NHTSA Recall No. 24V-744 to address this defect. The recall will provide consumers with a new steering worm wheel gear spring with a decreased load. Additionally, dealerships will add additional grease and relocate any grease sitting on top of the worm wheel back into the meshing area. The scope of this recall includes all Honda vehicles that were manufactured with this specific improperly produced steering worm wheel and spring. In view of the recall action being taken by Honda, ODI is closing EA23003. NHTSA reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.