← New search

2017 Western Star 6900

Owner reports · Recalls · Investigations

Limited comparison data

There is not enough comparable history to draw a useful model-year comparison.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all 6900 years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

No component reports in this snapshot.

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 0 of 0 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

NHTSA owner reports · September 18, 2026 snapshot.

0 crash reports0 fire reports0 injury reports

What owners actually said

0 reports

No matching complaints in this snapshot.

Official recalls

5

21V882000 · Electrical System:wiring

Nov 12, 2021

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Western Star 4700, 4900, 5700, and 6900 trucks. The affected trucks have a power stud that passes through the bulkhead. In certain circumstances, the power stud may contact the bulkhead and result in an electrical arc.

Consequence & remedy

Consequence: An electrical arc can increase the risk of a fire.

Remedy: Dealers will replace the pass-through power studs, free of charge. Owner notification letters were mailed January 7, 2022. This recall supersedes previous recall number 18V-191. Vehicles previously inspected and considered complete under 18V-191 will need to return for the new remedy. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-907.

18V191000 · Electrical System:wiring

Mar 26, 2018

Daimler Trucks North America LLC (DTNA) is recalling certain 2017-2019 Western Star 4700, 4900, 5700, and 6900 trucks. The affected trucks have a power stud that passes through the bulkhead. In certain circumstances the power stud may contact the bulkhead and result in an electrical arc.

Consequence & remedy

Consequence: An electrical arc can increase the risk of a fire.

Remedy: DTNA will notify owners, and dealers will inspect the power stud for the proper clearance to the bulkhead, and replace it if necessary, free of charge. DTNA issued an interim notification to owners on May 23, 2018. The recall began October 29, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-766.

17V810000 · Equipment

Dec 15, 2017

Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Freightliner Cascadia, Century Class, Columbia and Coronado trucks and Western Star 4700, 4900, 5700, 5900 and 6900 trucks. These vehicles are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or excessive force may be needed to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

Consequence & remedy

Consequence: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

Remedy: DTNA will notify owners, and instruct them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on April 11, 2018. Owners may contact DTNA customer service at 1-800-547-0712, or contact Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. DTNA's number for this recall is FL-759.

17V761000 · Exterior Lighting:brake Lights; Exterior Lighting:brake Lights:switch

Nov 27, 2017

Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal.

Consequence & remedy

Consequence: If the brake lights fail to illuminate, there would not be a signal to other motorists that the vehicle is slowing, increasing the risk of a crash.

Remedy: DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.

Additional source detail variants (2)

Exterior Lighting:brake Lights:switch

Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal.

Consequence: If the brake lights fail to illuminate, there would not be a signal to other motorists that the vehicle is slowing, increasing the risk of a crash.

Remedy: DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.

Exterior Lighting:brake Lights

Daimler Trucks North America, LLC (DTNA) is recalling certain 2008-2018 Freightliner Cascadia, Western Star 4700, 4900, 5700, and 6900 trucks. After hard brake applications, the brake light pressure switch may not activate the brake lights with a light application of the brake pedal.

Consequence: If the brake lights fail to illuminate, there would not be a signal to other motorists that the vehicle is slowing, increasing the risk of a crash.

Remedy: DTNA will notify owners, and dealers will repair the vehicles, free of charge. Daimler issued interim notifications to owners on January 22, 2018. The recall began on May 9, 2018. Owners may contact DTNA customer service at 1-800-547-0712. DTNA's number for this recall is FL-756.

17V450000 · Fuel System, Diesel

Jul 19, 2017

Daimler Trucks North America (DTNA) is recalling certain 2017-2018 Freightliner 122SD trucks, Western Star 4900 and 6900 trucks, and Freightliner Custom Chassis XCM and XCP chassis equipped with Cummins ISX15 engines. The affected engines have a fuel pump whose drive gear may slip on its drive shaft, resulting in a loss of fuel pump function.

Consequence & remedy

Consequence: Failure of the fuel pump will result in a sudden engine stall with no warning, and with no ability to restart, increasing the risk of a crash.

Remedy: Cummins will send notices to the owners of the affected vehicles and Cummins dealers will replace the fuel pumps, free of charge. The recall began on September 11, 2017. Owners may contact Cummins customer service at 1-800-286-6467 or DTNA customer service at 1-800-745-8000. DTNA's number for this recall is FL744.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

AQ18002 · Daimler Trucks North America Recalls

Opened Apr 23, 2018 · Closed Jul 11, 2024

Status: closed (inferred from source dates) · Exterior Lighting:brake Lights:switch; Steering:hydraulic Power Assist:hose, Piping, And Connections

On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.

Additional source detail variants (2)

Exterior Lighting:brake Lights:switch

On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.

Steering:hydraulic Power Assist:hose, Piping, And Connections

On April 23, 2018, the National Highway Traffic Safety Administration (“NHTSA”) opened Audit Query (AQ18002) to assess the timeliness and scope of four recalls filed by Daimler Trucks North America, LLC (“DTNA”). NHTSA subsequently expanded AQ18002 to examine the timeliness and scope of three additional DTNA recalls and compliance with early warning reporting and manufacturer communications reporting requirements. NHTSA and DTNA entered into a Consent Order on December 29, 2020, to resolve NHTSA’s assertions that certain recalls within the scope of AQ18002 were untimely, DTNA failed to timely submit certain manufacturer communications to NHTSA, and DTNA failed to submit field reports to NHTSA as required. As part of the Consent Order, DTNA agreed to a total civil penalty of thirty million dollars ($30,000,000), of which ten million dollars ($10,000,000) was paid on January 12, 2021. Also, of that total civil penalty, DTNA agreed to spend five million dollars ($5,000,000) on the specific performance obligations to develop advanced data analytics capabilities to enhance its ability to detect and study emerging safety-related defect trends on its vehicles (“Safety Data Analytics infrastructure”) and an advanced data analytics and reporting platform that integrates data on emerging safety-related defect trends on its vehicles and recall lessons learned (“Safety Communications Platform”). The Consent Order also held fifteen million dollars ($15,000,000) of the civil penalty in abeyance pending DTNA’s satisfactory completion of the requirements of the Consent Order, and its compliance with the Safety Act, and regulations thereunder. NHTSA and DTNA agreed to a two-year term for the Consent Order—with an option for NHTSA to extend the Consent Order for an additional year, if warranted. In the Consent Order, DTNA agreed to numerous performance obligations, including monthly meetings with NHTSA to discuss potential safety issues, recent manufacturer communications, and recall decision-making, among other things; quarterly meetings with NHTSA to discuss DTNA’s progress on the performance obligations under the Consent Order, including the Safety Data Analytics infrastructure and Safety Communications Platform, and any issues related to compliance with the Consent Order, Safety Act, or regulations; development of written procedures and employee training materials to help DTNA comply with its legal obligations to timely identify and report safety defects and noncompliances, submit complete and accurate recall filings, and timely submit manufacturer communications and field reports to NHTSA; and identifying and reporting previously unreported manufacturer communications and field reports. Also, via the Consent Order, DTNA acknowledged that the failure or inability to identify a specific root cause, develop an adequate remedy or repair, or confirm the affected population of vehicles are not bases for delaying filing a recall with NHTSA. On December 22, 2022, NHTSA extended the Consent Order for a term of one year due to concerns about DTNA’s compliance with its recall-related obligations. Specifically, NHTSA expressed concerns about the completeness of DTNA’s recall reports and issues identified with owner notification letters during the term of the Consent Order, as well as the length of time that DTNA took to consider a straightforward noncompliance issue before filing a recall and DTNA’s interactions with NHTSA during the term of the Consent Order. NHTSA addressed these concerns with DTNA during the third year of the Consent Order. The extended term of the Consent Order expired on December 28, 2023. Based on the Consent Order, this investigation, AQ18002, is closed. Closure of this AQ has no bearing on the terms of the Consent Order or DTNA’s ongoing legal obligations, and it does not represent a determination by NHTSA as to DTNA’s performance under the Consent Order.