Volvo Trucks North America (Volvo) is recalling certain 2017 Volvo VHD, VNL, and VNM trucks manufactured February 19, 2016, to June 21, 2016. The affected vehicles were built with front wheel hubs that cannot support the gross axle weight rating of the front axle.

Consequence & remedy

Consequence: Overloaded front wheel hubs can result in premature failure of the hubs, bearings, and the related components, which can cause the front hub assembly to separate from the front axle. Because of this, the driver may lose control of the vehicle or parts may be dropped on the road, increasing the risk of a crash.

Remedy: Volvo will notify owners, and dealers will replace the hub assemblies, free of charge. The recall began on February 16, 2017. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1607.

16V928000 · Service Brakes, Air

Dec 22, 2016

Volvo Trucks North America (Volvo) is recalling certain model year 2013-2017 VNL and VNM trucks and certain model year 2017 VNX trucks. In the affected vehicles, incorrect software for controlling the electronic air dryer may result in oil and water contaminating the brake system.

Consequence & remedy

Consequence: If the brake system becomes contaminated, braking performance could be affected, increasing the risk of a crash.

Remedy: Volvo will notify owners, and dealers will reprogram the vehicle control module and replace the air dryer filter, free of charge. The recall began on February 16, 2017. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1608.

16V097000 · Steering

Feb 17, 2016

Volvo Trucks North America (Volvo) is recalling certain model year 2016-2017 VNL, VNX, and VNM trucks manufactured from May 11, 2015, through April 18, 2016. The trucks may have been manufactured without a roll pin on the steering shafts. If the roll pin is missing, the lower steering shaft may disconnect from the junction block. Also, the bolt connecting the upper steering shaft to the lower steering shaft may not have been properly tightened. Either condition can lead to separation of the steering shaft.

Consequence & remedy

Consequence: Separation of the steering shaft will result in complete loss of steering which may lead to a vehicle crash.

Remedy: Volvo is strongly recommending that the affected vehicles not be driven until the interim remedy is applied. An interim notice was sent to Volvo owners on March 16, 2016, and an interim repair is available now. A second notice was mailed on May 13, 2016. The final remedy is now available. Both remedies are free of charge. Owners may contact Volvo customer service at 1-877-800-4945 opt #1. Volvo's recall numbers for this campaign are RVXX1602 and RVXX1603. This recall supersedes safety recall 15V-786.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

AQ18005 · Discrepancies In Required Cfr Reporting

Opened Oct 22, 2018 · Closed Aug 4, 2023

Status: closed (inferred from source dates) · Communication

On October 22, 2018, an Audit Query (AQ18-005) was opened to assess the completeness and timeliness of Volvo Group's early warning reporting, safety recalls, and communications submissions to the agency.NHTSA's investigation determined that Volvo Group failed to recall vehicles in a timely fashion and to comply with other recall and reporting requirements, including notifying owners of recalls and reporting death and injury incidents.NHTSA and Volvo Group entered into a Consent Order on January 27, 2023 to resolve AQ18-005.As part of the Consent Order, Volvo Group agreed to a total civil penalty of one-hundred and thirty million dollars ($130,000,000), of which, sixty-five million dollars ($65,000,000) was paid on February 21, 2023.Also, of that total civil penalty, Volvo Group agreed to spend twenty million dollars ($20,000,000) on the specific performance obligation to create a safety data analytics infrastructure to detect and study emerging safety-related defect trends on its vehicles. The Consent Order also holds forty-five million dollars ($45,000,000) of the civil penalty in abeyance pending Volvo Group's satisfactory completion of the requirements of this Consent Order, and its compliance with the Safety Act, and regulations thereunder.The Consent Order is for a three-year term and may be extended by up to two years if NHTSA reasonably finds that an extension is warranted.In the Consent Order, Volvo Group agreed to several performance obligations, including enhanced oversight of its compliance with the Safety Act and the terms of the Consent Order through a third-party auditor and regular meetings with NHTSA.The third-party auditor will recommend and oversee implementation of process improvements to enhance Volvo Group's safety compliance processes and oversee the company's review of past recalls and submissions to NHTSA for accuracy and completeness.Also, via the Consent Order, Volvo Group agreed to create updated written policies, procedures, and training to ensure that its employees understand the requirements of the Safety Act, the regulations thereunder, and this Consent Order.Volvo Group further agreed to launch a user interface on its websites to allow users to search vehicle identification numbers (VINs) for open recalls and implement a system to support NHTSA's VIN lookup tool.Based on the Consent Order, this audit query investigation, AQ18-005, is closed.Closure of this AQ has no bearing on the terms of the Consent Order, including Volvo Group's ongoing performance obligations or legal obligations, and does not represent a determination by NHTSA as to Volvo Group's performance under the Consent Order to date.