NHTSA owner reports · September 18, 2026 snapshot.
Official recalls
11Oct 30, 2018
Volvo Trucks North America (Volvo) is recalling certain 2004-2019 Volvo VHD trucks equipped with snow plow lamp preparation kits. The snow plow headlights can be turned on without other exterior lights, and high beam indicator will not work when the snow plow high beams are on. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence & remedy
Consequence: The driver may operate the vehicle with the snow plow headlights on but the marker and tail lamps off, reducing the vehicle's visibility and increasing the risk of a crash.
Remedy: Volvo will notify owners, and dealers will update the software related to the plow lights, free of charge. The recall began December 19, 2018. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1804.
Oct 13, 2016
Volvo Trucks North America (Volvo) is recalling certain model year 2009-2016 VHD trucks manufactured from April 7, 2008, through December 9, 2015, equipped with USK non-greasable drag links. The ball joint seals may be compromised, which can allow water and other contaminants to enter the ball joints.
Consequence & remedy
Consequence: If water and contaminants enter the ball joint, corrosion can occur and lead to accelerated wear, which over time can result in failure of the ball joint, possibly resulting in complete loss of steering, increasing the risk of a crash.
Remedy: Volvo will notify owners, and dealers will replace the drag links, free of charge. The recall began on December 2, 2016. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1606.
Additional source detail variants (2)
Suspension:front:control Arm:lower Ball Joint
Volvo Trucks North America (Volvo) is recalling certain model year 2009-2016 VHD trucks manufactured from April 7, 2008, through December 9, 2015, equipped with USK non-greasable drag links. The ball joint seals may be compromised, which can allow water and other contaminants to enter the ball joints.
Consequence: If water and contaminants enter the ball joint, corrosion can occur and lead to accelerated wear, which over time can result in failure of the ball joint, possibly resulting in complete loss of steering, increasing the risk of a crash.
Remedy: Volvo will notify owners, and dealers will replace the drag links, free of charge. The recall began on December 2, 2016. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1606.
Suspension:front:control Arm:upper Ball Joint
Volvo Trucks North America (Volvo) is recalling certain model year 2009-2016 VHD trucks manufactured from April 7, 2008, through December 9, 2015, equipped with USK non-greasable drag links. The ball joint seals may be compromised, which can allow water and other contaminants to enter the ball joints.
Consequence: If water and contaminants enter the ball joint, corrosion can occur and lead to accelerated wear, which over time can result in failure of the ball joint, possibly resulting in complete loss of steering, increasing the risk of a crash.
Remedy: Volvo will notify owners, and dealers will replace the drag links, free of charge. The recall began on December 2, 2016. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1606.
Nov 18, 2014
Volvo Trucks North America (Volvo) is recalling certain model year 2012, 2014-2015 VHD, 2012-2015 VNL, and 2014-2015 VNM trucks manufactured June 16, 2011, to August 18, 2014, and equipped with the Eco-Roll option. The affected trucks may fail to re-engage the vehicle drivetrain after using the Eco-Roll feature.
Consequence & remedy
Consequence: If the drivetrain does not re-engage, the vehicle's stopping distance may be lengthened, increasing the risk of a crash.
Remedy: Volvo has notified owners, and dealers will update the Eco-Roll software, free of charge. The recall began on December 10, 2014. Owners may contact Volvo customer service at 1-800-528-6586. Volvo's number for this recall is RVXX1406.
Aug 13, 2013
Volvo Trucks North America (Volvo) is recalling certain model year 2011-2012 VAH, VHD, VNL, and VNM trucks manufactured February 1, 2010, through September 30, 2010 and June 1, 2011, through November 30, 2011. The windshield wiper motor may fail.
Consequence & remedy
Consequence: Inoperable wipers may result in poor driver visibility, increasing the risk of a crash.
Remedy: Volvo will notify owners and dealers will replace the windshield wiper motor, free of charge. The recallbegan on December 6, 2013. Owners may contact Volvo at 1-336-393-2000. Volvo's recall number is RVXX1304.
Jun 26, 2013
Volvo Trucks North America (Volvo) is recalling certain model year 2007-2014 VAH, VHD, VNL, VNM, and VT models. The affected vehicles were built without a redundant clutch disengagement switch. Without a redundant switch, a loss of signal from the brake air pressure switch can prevent the clutch from automatically disengaging when the brake is applied.
Consequence & remedy
Consequence: Without a signal to disengage the clutch when the brakes are applied, the distance required to stop the truck may lengthen, increasing the risk of a crash.
Remedy: Volvo Trucks will notify owners and dealers will inspect and repair the vehicles if necessary. The recall began on August 26, 2013. Volvo's recall number is RVXX1303. Owners may contact Volvo at 1-336-393-2000.
Apr 22, 2013
Volvo Trucks North America (Volvo) is recalling certain model year 2011-2013 VHD and VNL vehicles manufactured December 13, 2010, through July 17, 2012. These vehicles are equipped with an MGM Type 24 J-series piston parking brake chamber. The brake chambers may leak pressure allowing the parking brake to drag when it is supposed to be released. Brake dragging could lead to overheated brake components.
Consequence & remedy
Consequence: Overheated brake components could result in a fire.
Remedy: Volvo will notify owners and the brake chambers will be replaced as needed, free of charge. The safety recall is expected to begin on, or before, June 17, 2013. Owners may contact Volvo at 1-336-393-2000. Volvos campaign recall number is RVXX1302.
Mar 21, 2013
Volvo is recalling certain model year 2012-2014 VHD, VNL, and VNM trucks, manufactured from April 18, 2011, through March 14, 2013, and equipped with a horizontally mounted remote battery disconnect switch. The remote battery disconnect switch was manufactured with incorrect hardware allowing the cables to loosen. Additionally, as mounted, the cables may vibrate and chafe.
Consequence & remedy
Consequence: Loose or chafed cables may lead to overheating of the battery cable and switch which may result in a fire.
Remedy: Volvo will send owners an interim letter and dealers will replace and relocate the remote battery disconnect switch. The recall began on May 7, 2013. Owners may contact Volvo's recall support line at 1-877-800-4945 and select option 1.
Oct 18, 2012
Volvo is recalling certain model year 2002-2013 VHD and VN trucks, manufactured from August 4, 2000, through June 22, 2012, and equipped with bench passenger seats. The seat belt d-ring weld may not be sufficient enough to meet the seat belt pull test. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages."
Consequence & remedy
Consequence: In the event of a crash, an insufficient seat belt weld may prevent the seat belt from properly restraining the occupant. This increases the risk of injury to the seat occupant.
Remedy: Volvo Trucks of America will notify owners, and dealers will replace the suspected d-ring, free of change. The safety recall began on May 10, 2013. Owners may contact Volvo at 1-336-393-2000.
Feb 1, 2012
VOLVO IS RECALLING CERTAIN MODEL YEAR 2011-2012 VHD AND MODEL YEAR 2011-2013 VNL AND VNM VEHICLES, MANUFACTURED FROM DECEMBER 2, 2010, THROUGH JANUARY 18, 2012, AND EQUIPPED WITH BENDIX ATR-6 TRACTION RELAY VALVES. IN EXTREMELY COLD CONDITIONS, THESE BENDIX RELAY VALVES MAY POTENTIALLY DEVELOP INTERNAL LEAKAGE. INTERNAL LEAKAGE CAN LEAD TO AIR PRESSURE BEING DELIVERED TO AFFECTED PRIMARY OR SECONDARY BRAKE CAUSING CONTINUOUS BRAKE APPLICATION.
Consequence & remedy
Consequence: INADVERTENT BRAKE APPLICATION CAN CAUSE THE BRAKES TO OVERHEAT AND LEAD TO A FIRE. INADVERTENT BRAKE APPLICATION CAN CAUSE THE WHEELS TO LOCK-UP LEADING THE DRIVER TO LOSE CONTROL OF THE VEHICLE, INCREASING THE RISK OF A CRASH.
Remedy: VOLVO WILL NOTIFY OWNERS, AND PROVIDE A TEMPORARY REPAIR UNTIL BENDIX DEVELOPS A PERMANENT REMEDY. A PERMANENT REMEDY HAS BEEN DEVELOPED AND NOTIFICATION TO OWNERS BEGAN ON APRIL 27, 2012. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. OWNERS MAY CONTACT VOLVO TRUCKS AT 1-800-528-6586.
May 20, 2011
VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2012 VHD, VNL, AND VNM TRUCKS EQUIPPED WITH A MERITOR DRIVELINE. THE TUBING USED TO ASSEMBLE THE DRIVELINES HAS A NONCONFORMING SEAM WELD WITH INSUFFICIENT BONDING OF THE MATERIAL.
Consequence & remedy
Consequence: THIS CAN RESULT IN SEAM WELD FRACTURE WHEN TORQUE IS APPLIED. ONCE THE TUBE SEAM WELD IS FRACTURED, THE DRIVELINE MAY BECOME INOPERABLE, WHICH MAY RESULT IN A DISABLED VEHICLE OR DEBRIS FROM THE DRIVELINE FALLING ONTO THE ROADWAY, BOTH OF WHICH CAN INCREASE THE RISK OF A CRASH.
Remedy: DEALERS WILL REPLACE THE DRIVELINES FREE OF CHARGE. THE SAFETY RECALL BEGAN ON JULY 25, 2011. OWNERS MAY CONTACT VOLVO TRUCKS AT 1-800-528-6586.
May 3, 2011
VOLVO TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011-2012 VHD, VNL, AND MODEL YEAR 2012 VNM TRUCKS MANUFACTURED FROM OCTOBER 15, 2010, THROUGH JANUARY 31, 2011, AND EQUIPPED WITH GUNITE AUTOMATIC SLACK ADJUSTERS. DUE TO AN INCOMPLETE "KNITTING" OF THE IRON AT THE TIME OF CASTING, INADEQUATE STRUCTURAL INTEGRITY OF THE SLACK ADJUSTER HOUSING CAN OCCUR, WHICH COULD CAUSE THE HOUSING TO BREAK AT THE HANDLE UNDER NORMAL OPERATING LOADS.
Consequence & remedy
Consequence: SLACK ADJUSTERS WITH THIS FLOW NOTCH COULD CRACK UNDER NORMAL BRAKING CONDITIONS CAUSING LOSS OF BRAKING WHICH COULD RESULT IN A VEHICLE CRASH.
Remedy: VOLVO TRUCKS WILL NOTIFY OWNERS AND DEALERS WILL REPLACE THE SUBJECT SLACK ADJUSTERS FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT AUGUST 12, 2011. OWNERS MAY CONTACT VOLVO TRUCKS AT 1-800-528-6586.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2AQ18005 · Discrepancies In Required Cfr Reporting
Opened Oct 22, 2018 · Closed Aug 4, 2023
Status: closed (inferred from source dates) · Communication
On October 22, 2018, an Audit Query (AQ18-005) was opened to assess the completeness and timeliness of Volvo Group's early warning reporting, safety recalls, and communications submissions to the agency.NHTSA's investigation determined that Volvo Group failed to recall vehicles in a timely fashion and to comply with other recall and reporting requirements, including notifying owners of recalls and reporting death and injury incidents.NHTSA and Volvo Group entered into a Consent Order on January 27, 2023 to resolve AQ18-005.As part of the Consent Order, Volvo Group agreed to a total civil penalty of one-hundred and thirty million dollars ($130,000,000), of which, sixty-five million dollars ($65,000,000) was paid on February 21, 2023.Also, of that total civil penalty, Volvo Group agreed to spend twenty million dollars ($20,000,000) on the specific performance obligation to create a safety data analytics infrastructure to detect and study emerging safety-related defect trends on its vehicles. The Consent Order also holds forty-five million dollars ($45,000,000) of the civil penalty in abeyance pending Volvo Group's satisfactory completion of the requirements of this Consent Order, and its compliance with the Safety Act, and regulations thereunder.The Consent Order is for a three-year term and may be extended by up to two years if NHTSA reasonably finds that an extension is warranted.In the Consent Order, Volvo Group agreed to several performance obligations, including enhanced oversight of its compliance with the Safety Act and the terms of the Consent Order through a third-party auditor and regular meetings with NHTSA.The third-party auditor will recommend and oversee implementation of process improvements to enhance Volvo Group's safety compliance processes and oversee the company's review of past recalls and submissions to NHTSA for accuracy and completeness.Also, via the Consent Order, Volvo Group agreed to create updated written policies, procedures, and training to ensure that its employees understand the requirements of the Safety Act, the regulations thereunder, and this Consent Order.Volvo Group further agreed to launch a user interface on its websites to allow users to search vehicle identification numbers (VINs) for open recalls and implement a system to support NHTSA's VIN lookup tool.Based on the Consent Order, this audit query investigation, AQ18-005, is closed.Closure of this AQ has no bearing on the terms of the Consent Order, including Volvo Group's ongoing performance obligations or legal obligations, and does not represent a determination by NHTSA as to Volvo Group's performance under the Consent Order to date.
PE13002 · Stop Lamp Switch Signal
Opened Feb 7, 2013 · Closed Jul 3, 2013
Status: closed (inferred from source dates) · Power Train:automatic Transmission; Power Train:manual Transmission; Service Brakes, Air:controls:foot Control/valve
The Office of Defects Investigation (ODI) received Early Warning Reporting (EWR) data from the manufacturer that indicated some number of subject vehicles equipped with the subject automated manual transmission had allegedly experienced a condition where the clutch failed to automatically disengage the transmission from the engine as intended. This may result in extended stopping distances and/or unintended forward motion of a vehicle previously at rest.To date, ODI is aware of 134 subject vehicles with one or more complaints or field reports related to this condition.Also, ODI is aware of 164 subject vehicles with one or more warranty claims related to this condition.By letter dated June 25, 2013, Volvo Trucks North America (Volvo) notified ODI that it has initiated a safety recall (NHTSA Recall No. 13V268 and Volvo Recall No. RVXX1303) to address a safety defect in approximately 23,003 model year (MY) 2007 through 2014 Volvo VAH, VHD, VNL, VNM and VT model trucks. The affected vehicles were manufactured from December 20, 2006 through May 22, 2013 and were originally equipped with the subject automated manual transmissions.According to Volvo, reports of the subject transmission clutch mechanism failing to automatically disengage as intended are associated with the removal of a brake pedal micro switch that provided a redundant signal to the transmission control module indicating the brakes had been applied.Previously, Volvo had removed this brake pedal micro switch from new vehicle production and from certain vehicles already in-service via two field service campaigns (SP 432-024 and SP 432-026) because it decided the switch was unnecessary and/or a maintenance issue.In the absence of this redundant brake pedal micro switch, the clutch mechanism may fail to disengage the transmission from the engine at low vehicle speed should the stop lamp switch fail to send and/or the transmission control module fail to receive the primary signal.At the time of this closing, Volvo is evaluating available remedies and will provide NHTSA with details when the recall remedy procedure has been finalized.Volvo will notify affected owners by mail by August 25, 2013.Please see NHTSA Recall No. 13V268 for details.Accordingly, this investigation is closed.
Additional source detail variants (3)
Power Train:automatic Transmission
The Office of Defects Investigation (ODI) received Early Warning Reporting (EWR) data from the manufacturer that indicated some number of subject vehicles equipped with the subject automated manual transmission had allegedly experienced a condition where the clutch failed to automatically disengage the transmission from the engine as intended. This may result in extended stopping distances and/or unintended forward motion of a vehicle previously at rest.To date, ODI is aware of 134 subject vehicles with one or more complaints or field reports related to this condition.Also, ODI is aware of 164 subject vehicles with one or more warranty claims related to this condition.By letter dated June 25, 2013, Volvo Trucks North America (Volvo) notified ODI that it has initiated a safety recall (NHTSA Recall No. 13V268 and Volvo Recall No. RVXX1303) to address a safety defect in approximately 23,003 model year (MY) 2007 through 2014 Volvo VAH, VHD, VNL, VNM and VT model trucks. The affected vehicles were manufactured from December 20, 2006 through May 22, 2013 and were originally equipped with the subject automated manual transmissions.According to Volvo, reports of the subject transmission clutch mechanism failing to automatically disengage as intended are associated with the removal of a brake pedal micro switch that provided a redundant signal to the transmission control module indicating the brakes had been applied.Previously, Volvo had removed this brake pedal micro switch from new vehicle production and from certain vehicles already in-service via two field service campaigns (SP 432-024 and SP 432-026) because it decided the switch was unnecessary and/or a maintenance issue.In the absence of this redundant brake pedal micro switch, the clutch mechanism may fail to disengage the transmission from the engine at low vehicle speed should the stop lamp switch fail to send and/or the transmission control module fail to receive the primary signal.At the time of this closing, Volvo is evaluating available remedies and will provide NHTSA with details when the recall remedy procedure has been finalized.Volvo will notify affected owners by mail by August 25, 2013.Please see NHTSA Recall No. 13V268 for details.Accordingly, this investigation is closed.
Power Train:manual Transmission
The Office of Defects Investigation (ODI) received Early Warning Reporting (EWR) data from the manufacturer that indicated some number of subject vehicles equipped with the subject automated manual transmission had allegedly experienced a condition where the clutch failed to automatically disengage the transmission from the engine as intended. This may result in extended stopping distances and/or unintended forward motion of a vehicle previously at rest.To date, ODI is aware of 134 subject vehicles with one or more complaints or field reports related to this condition.Also, ODI is aware of 164 subject vehicles with one or more warranty claims related to this condition.By letter dated June 25, 2013, Volvo Trucks North America (Volvo) notified ODI that it has initiated a safety recall (NHTSA Recall No. 13V268 and Volvo Recall No. RVXX1303) to address a safety defect in approximately 23,003 model year (MY) 2007 through 2014 Volvo VAH, VHD, VNL, VNM and VT model trucks. The affected vehicles were manufactured from December 20, 2006 through May 22, 2013 and were originally equipped with the subject automated manual transmissions.According to Volvo, reports of the subject transmission clutch mechanism failing to automatically disengage as intended are associated with the removal of a brake pedal micro switch that provided a redundant signal to the transmission control module indicating the brakes had been applied.Previously, Volvo had removed this brake pedal micro switch from new vehicle production and from certain vehicles already in-service via two field service campaigns (SP 432-024 and SP 432-026) because it decided the switch was unnecessary and/or a maintenance issue.In the absence of this redundant brake pedal micro switch, the clutch mechanism may fail to disengage the transmission from the engine at low vehicle speed should the stop lamp switch fail to send and/or the transmission control module fail to receive the primary signal.At the time of this closing, Volvo is evaluating available remedies and will provide NHTSA with details when the recall remedy procedure has been finalized.Volvo will notify affected owners by mail by August 25, 2013.Please see NHTSA Recall No. 13V268 for details.Accordingly, this investigation is closed.
Service Brakes, Air:controls:foot Control/valve
The Office of Defects Investigation (ODI) received Early Warning Reporting (EWR) data from the manufacturer that indicated some number of subject vehicles equipped with the subject automated manual transmission had allegedly experienced a condition where the clutch failed to automatically disengage the transmission from the engine as intended. This may result in extended stopping distances and/or unintended forward motion of a vehicle previously at rest.To date, ODI is aware of 134 subject vehicles with one or more complaints or field reports related to this condition.Also, ODI is aware of 164 subject vehicles with one or more warranty claims related to this condition.By letter dated June 25, 2013, Volvo Trucks North America (Volvo) notified ODI that it has initiated a safety recall (NHTSA Recall No. 13V268 and Volvo Recall No. RVXX1303) to address a safety defect in approximately 23,003 model year (MY) 2007 through 2014 Volvo VAH, VHD, VNL, VNM and VT model trucks. The affected vehicles were manufactured from December 20, 2006 through May 22, 2013 and were originally equipped with the subject automated manual transmissions.According to Volvo, reports of the subject transmission clutch mechanism failing to automatically disengage as intended are associated with the removal of a brake pedal micro switch that provided a redundant signal to the transmission control module indicating the brakes had been applied.Previously, Volvo had removed this brake pedal micro switch from new vehicle production and from certain vehicles already in-service via two field service campaigns (SP 432-024 and SP 432-026) because it decided the switch was unnecessary and/or a maintenance issue.In the absence of this redundant brake pedal micro switch, the clutch mechanism may fail to disengage the transmission from the engine at low vehicle speed should the stop lamp switch fail to send and/or the transmission control module fail to receive the primary signal.At the time of this closing, Volvo is evaluating available remedies and will provide NHTSA with details when the recall remedy procedure has been finalized.Volvo will notify affected owners by mail by August 25, 2013.Please see NHTSA Recall No. 13V268 for details.Accordingly, this investigation is closed.
Illustration