Spartan Motors USA (Spartan) is recalling certain 1991-2018 Utilimaster Aeromaster and Walk-In Vans. These vehicles were manufactured with front seat belts that do not have an emergency locking seat belt retractor or automatic locking seat belt retractor. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Consequence & remedy
Consequence: Without retractors, the seat belts may not accommodate different size occupants, therefore the occupants may not be properly restrained in the event of a crash, increasing the risk of injury.
Remedy: Spartan will notify owners and will install seat belts with retractors, free of charge. The recall began on August 6, 2018. Owners may contact Spartan customer service at 1-800-582-3454. Spartan's number for this recall is 18019.
Spartan Motors, Inc. (Spartan) is recalling certain model year 2010-2014 Utilimaster Aeromaster walk-in vans manufactured January 1, 2010, through March 19, 2014. The affected vehicles may have a loose power connection at the power stud terminal block.
Consequence & remedy
Consequence: A loose power stud may cause arcing or high heat on the terminal, increasing the risk of a fire.
Remedy: Spartan will notify owners, and dealers will inspect and properly tighten the electrical connection, as necessary, free of charge. The recall began on May 23, 2014. Owners may contact Spartan at 1-517-543-6400.
UTILIMASTER IS RECALLING CERTAIN MODEL YEAR 2011-2012 AEROMASTER VEHICLES MANUFACTURED FROM MARCH 11, 2009, THROUGH DECEMBER 3, 2012. THE TRANSMISSION GEAR SHIFTERS CABLE MAY BREAK AT THE ATTACHMENT TO THE TRANSMISSION CONTROL SELECTOR ARM ASSEMBLY MOUNTED ON THE STEERING COLUMN. IF THE CABLE BREAKS, THE TRANSMISSION GEAR INDICATOR IN THE PRNDL DISPLAY IN THE INSTRUMENT PANEL WILL REMAIN IN THE FIRST GEAR POSITION REGARDLESS OF THE GEAR SELECTED.
Consequence & remedy
Consequence: AN INCORRECT GEAR INDICATION IN THE INSTRUMENT PANEL MAY PREVENT THE DRIVER FROM KNOWING IF THEY ARE IN PARK OR REVERSE, INCREASING THE RISK OF A CRASH.
Remedy: UTILIMASTER WILL NOTIFY OWNERS, AND DEALERS WILL REPLACE THE TRANSMISSION SELECTOR ARM ASSEMBLY AND THE TRANSMISSION GEAR SHIFTERS CABLE ASSEMBLY, FREE OF CHARGE. THE SAFETY RECALL BEGAN ON MARCH 16, 2012. OWNERS MAY CONTACT UTILIMASTER AT 1-517-543-6400.
Certain Utilimaster model year 2009 through 2011 Aeromaster and one model year 2011 Reach work trucks manufactured from September 1, 2009, through December 22, 2011, fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 206, "Door Locks and Door Retention Components."
Consequence & remedy
Consequence: Certain work trucks are not equipped with either a primary door latch system or a door latch system with a fully latched position and a door closure warning system as required by FMVSS 206. Without a door closure warning system, the driver may not be aware that the door is not fully latched. The door could partially open without warning and the driver may be at an increased risk of injuries in the event of a crash.
Remedy: Utilimaster will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on November 16, 2012. Owners may contact Utilimaster at 1-800-582-3454.
Additional source detail variants (2)
Latches/locks/linkages:doors:latch
Certain Utilimaster model year 2009 through 2011 Aeromaster and one model year 2011 Reach work trucks manufactured from September 1, 2009, through December 22, 2011, fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 206, "Door Locks and Door Retention Components."
Consequence: Certain work trucks are not equipped with either a primary door latch system or a door latch system with a fully latched position and a door closure warning system as required by FMVSS 206. Without a door closure warning system, the driver may not be aware that the door is not fully latched. The door could partially open without warning and the driver may be at an increased risk of injuries in the event of a crash.
Remedy: Utilimaster will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on November 16, 2012. Owners may contact Utilimaster at 1-800-582-3454.
Structure:body:door
Certain Utilimaster model year 2009 through 2011 Aeromaster and one model year 2011 Reach work trucks manufactured from September 1, 2009, through December 22, 2011, fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 206, "Door Locks and Door Retention Components."
Consequence: Certain work trucks are not equipped with either a primary door latch system or a door latch system with a fully latched position and a door closure warning system as required by FMVSS 206. Without a door closure warning system, the driver may not be aware that the door is not fully latched. The door could partially open without warning and the driver may be at an increased risk of injuries in the event of a crash.
Remedy: Utilimaster will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on November 16, 2012. Owners may contact Utilimaster at 1-800-582-3454.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
2011 Utilimaster Aeromaster Problems, Complaints & Recalls | Skip That Year
Illustration