Known issue with these trucks apparently. Occasional throttle lag after stopping at a stop sign, with little response from the gas pedal. On november/december of this month pulling out into a main road with traffic coming, I stepped on the gas and experienced a complete "dead pedal". I stepped on the gas and had 0 response fro…
Read full complaint
Known issue with these trucks apparently. Occasional throttle lag after stopping at a stop sign, with little response from the gas pedal. On november/december of this month pulling out into a main road with traffic coming, I stepped on the gas and experienced a complete "dead pedal". I stepped on the gas and had 0 response from the truck staying at 5-10 MPH. With cars now coming towards me quickly as I was not moving I floored the gas pedal and had 0 response for another 2-3 seconds until finally the truck jolted at an extreme rate of speed. *Also have a dash cam that recorded in the incident of me flooring it with some vulgar words as cars were coming and the truck was not moving at all.
NHTSA ODI #11705713
Mileage unknown · Dec 12, 2025
EngineVehicle Speed Control
My 2024 Tundra has a throttle delay at times. When you go to accelerate quickly there is a second where the throttle cuts out and the truck stalls. This has almost caused me to get in multiple accidents.
NHTSA ODI #11704791
Mileage unknown · Dec 10, 2025
Unknown Or OtherVehicle Speed Control
At a stop, there is a delay when accelerating. It almost feels like it is "thinking" before it starts to go. There are no warning lamps. It is unsafe when pulling out of highway because of the uncertainty of when the vehicle feels like its going to go. Some call it turbolag but it feels more than that.
NHTSA ODI #11704287
Mileage unknown · Dec 9, 2025
EnginePower TrainVehicle Speed Control
I am experiencing an ongoing issue since the truck was new: the engine hesitates upon acceleration at any speed. When stopped this lag in throttle response makes it difficult to navigate in heavy or unpredictable traffic as the vehicle does not response to the pedal instantly and making intentional sudden speed changes is all bu…
Read full complaint
I am experiencing an ongoing issue since the truck was new: the engine hesitates upon acceleration at any speed. When stopped this lag in throttle response makes it difficult to navigate in heavy or unpredictable traffic as the vehicle does not response to the pedal instantly and making intentional sudden speed changes is all but impossible to do safely. Depressing the pedal heavy to try and hasten the response makes the truck surge into hard and fast acceleration, worsening the issue. I have discussed this with the dealer and they said this is “normal” for this truck, and I have heard the same from numerous other 3rd generation Tundra owners. This is a safety issue because I don’t have adequate control of the vehicle’s dynamics as the computer is overriding my control of the acceleration, presumably to improve fuel economy. Ultimately this seems to be an intentional design decision by Toyota and puts me and my passengers at risk.
NHTSA ODI #11704017
Mileage unknown · Dec 3, 2025
Vehicle Speed Control
While driving the vehicle there is excessive lag in throttle response when giving the vehicle gas pedal input. Example being when you push gas to accelerate there is a 1-2 second delay from the vehicle before there is movement or acceleration. This happens every time i drive the vehicle and has almost caused numerous accidents d…
Read full complaint
While driving the vehicle there is excessive lag in throttle response when giving the vehicle gas pedal input. Example being when you push gas to accelerate there is a 1-2 second delay from the vehicle before there is movement or acceleration. This happens every time i drive the vehicle and has almost caused numerous accidents due to the inconsistent response to throttle input.
NHTSA ODI #11702811
Mileage unknown · Dec 3, 2025
Fuel/propulsion SystemVehicle Speed Control
Vehicle hesitates to accelerate from stop or slow roll when pedal is engaged. This hesitation nearly caused a collision when attempting a left-hand turn in heavy traffic. Problem can be reproduced easily and is exacerbated when on an incline. It has not been confirmed by dealer or service center. Occurs regardless of whether aut…
Read full complaint
Vehicle hesitates to accelerate from stop or slow roll when pedal is engaged. This hesitation nearly caused a collision when attempting a left-hand turn in heavy traffic. Problem can be reproduced easily and is exacerbated when on an incline. It has not been confirmed by dealer or service center. Occurs regardless of whether auto start/stop feature is enabled or not. Putting transmission in "S" mode and manually down shifting to first gear appears to prevent the issue. After the hesitation, when the vehicle begins to accelerate, it performs a "hard" acceleration, like the pedal was slammed to the floor, even though consistent pressure was maintained on the the pedal. Problem has existed since purchasing the vehicle new in Dec. 2023.
NHTSA ODI #11702796
Mileage unknown · Nov 29, 2025
Unknown Or OtherVehicle Speed Control
I experience hesitation when applying the throttle from a stop followed by surging. This is incredibly alarming when trying to pull away from a stop sign or light, especially in residential areas with pedestrian traffic.
NHTSA ODI #11701994
Mileage unknown · Nov 25, 2025
Vehicle Speed Control
Truck has had several instances where there is throttle lag when accelerating from a standstill and from a rolling stop. Happens more often when making a right hand turn. This is a safety issue when turning at a stop sign or stop light in heavy traffic.
NHTSA ODI #11701479
Mileage unknown · Nov 25, 2025
Vehicle Speed Control
Throttle lag/hesitation. Significant throttle lag/hesitation when trying to accelerate from a dead stop. Throttle input isn’t instant, sometimes the delay in acceleration from a dead stop has put me in dangerous situations when pulling out to the road way or having to move out of the way.
NHTSA ODI #11701472
Mileage unknown · Oct 30, 2025
EngineFuel/propulsion SystemVehicle Speed Control
On Wednesday 10/21 at approximately 11:30pm I was traveling on the Clearview Expressway. While changing from the middle last to the left lane at 20mph due to a construction merge with some traffic. When trying to accelerate the truck lost all throttle power and my speed quickly dropped to 12mph before throttle response came bac…
Read full complaint
On Wednesday 10/21 at approximately 11:30pm I was traveling on the Clearview Expressway. While changing from the middle last to the left lane at 20mph due to a construction merge with some traffic. When trying to accelerate the truck lost all throttle power and my speed quickly dropped to 12mph before throttle response came back. No noticeable or harsh change of gear for this episode.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Tundra vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause a main bearing to fail, which can result in an engine stall and loss of drive power.
Consequence & remedy
Consequence: A loss of drive power increases the risk of a crash.
Remedy: Dealers will perform an inspection on the #1 main bearing using vehicle inspection software and drive data, and if necessary, replace the engine. Repairs will be performed free of charge. Interim letters notifying owners of the safety risk were mailed July 23, 2026. Additional letters will be sent once the final remedy is available. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB14 and 25TA14. This recall expands previous NHTSA recall numbers 24V381 and 25V767.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra, Tacoma Hybrid, Tacoma, RAV4 Hybrid, Land Cruiser Hybrid, Lexus GX550, 2024-2026 Tundra Hybrid, 2025 Sequoia Hybrid, Crown Signia, Grand Highlander, Lexus TX500 Hybrid, Lexus NX350 Hybrid, 2025-2026 Grand Highlander Hybrid, and Lexus TX350 vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.
Remedy: Dealers will replace the load carrying capacity modification label, free of charge. Owner letters were mailed May 26, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26LB04, 26LA04, 26TB07, and 26TA07.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra and Tundra Hybrid vehicles equipped with a Panoramic View Monitor (PVM) system. The rearview camera image may not display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Consequence & remedy
Consequence: A rearview camera image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the parking assist ECU software, free of charge. Owner notification letters were mailed March 23, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB02 and 26TA02.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Toyota Tundra, Lexus LX, and 2024 Lexus GX vehicles equipped with a V35A engine. Debris from the manufacturing process may contaminate the engine and cause the main bearings to fail, which can result in an engine stall and loss of drive power.
Consequence & remedy
Consequence: A loss of drive power increases the risk of a crash.
Remedy: Dealers will perform an inspection on the #1 main bearing using vehicle inspection software and drive data, and if necessary, replace the engine. Repairs will be performed free of charge. Owner letters were mailed August 28, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB14 and 25TA14. Lexus' numbers for this recall are 25LB07 and 25LA07. This recall expands previous NHTSA recall number 24V381.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Tundra, Tundra Hybrid, and 2023-2025 Sequoia Hybrid vehicles. A software error may cause the rearview image not to display when the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Consequence & remedy
Consequence: A rearview image that does not display reduces the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the multimedia display software, free of charge. Owner notification letters were mailed November 19, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB10 and 25TA10.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2025 Toyota Tundra and Tundra Hybrid vehicles. Moisture may enter the reverse light assemblies and cause a light failure.
Consequence & remedy
Consequence: Reverse light failure may reduce visibility, and not alert pedestrians and other drivers that the vehicle is backing up, increasing the risk of a crash.
Remedy: Dealers will replace both reverse light assemblies and repair the wire harnesses as necessary, free of charge. Owner letters were mailed May 23, 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331.Toyota's numbers for this recall are 24TB06 and 24TA06.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Sequoia Hybrid, Tundra and Tundra Hybrid vehicles. The passenger-side front and rear tires may have inner sidewall damage, which can cause a sudden loss of tire pressure.
Consequence & remedy
Consequence: A sudden loss of tire pressure can result in a loss of vehicle control, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the tires as necessary, free of charge. Owner notification letters were mailed December 5, 2024. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 24TA12.
Gulf States Toyota, Inc. (GST) is recalling certain Toyota 2023 GR Supra, 2024 4 Runner, Corolla, Grand Highlander, Grand Highlander Hybrid, Land Cruiser Hybrid, Tacoma, Tacoma Hybrid, 2023-2024 BZ4X, Corolla Cross Hybrid, GR Corolla, GR86, Highlander, Highlander Hybrid, Prius, Prius Prime, Sequoia Hybrid, Tundra, Tundra Hybrid, Venza Hybrid, 2023-2025 Crown, and 2025 Camry Hybrid vehicles equipped with GST accessories. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.
Remedy: GST will mail new labels to owners, free of charge. Owner notification letters were mailed September 16, 2024. Owners may contact GST customer service at 1-800-444-1074. GST's number for this recall is 24R2.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2024 Tundra, Tundra Hybrid, Lexus LX600, and 2023-2024 Sequoia Hybrid vehicles. Unexpected vehicle movement may occur when the vehicle is in neutral and the brakes are not applied.
Consequence & remedy
Consequence: Unexpected vehicle movement can increase the risk of a crash.
Remedy: Dealers will update the transmission control ECU software, free of charge. Owner notification letters were mailed April 8, 2024. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's numbers for this recall are 24TA02 and 24LA02.
Southeast Toyota Distributors, LLC (SET) is recalling certain 2022-2024 Toyota Tundra vehicles. The load carrying capacity modification label states the incorrect load carrying capacity, which can result in an overloaded vehicle. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: An overloaded vehicle increases the risk of a crash.
Remedy: SET will mail a new modified label, free of charge. Owner notification letters were mailed December 18, 2023. Owners may contact SET's customer service at 1-866-405-4226. SET's number for this recall is SET23B.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
2024 Toyota Tundra Problems, Complaints & Recalls | Skip That Year
Illustration