Counts are not failure probabilities and are not adjusted for sales, age, mileage exposure or reporting. One report may name several categories. Comparison method and limitations.
Vehicle Cannot Be Safely Driven – Structural / Suspension Defect Suspected – Dealer Claims “Repair Completed” Despite Unequal Wheelbase My vehicle is currently unsafe to operate, due to the following critical issues: ⸻ 1. Left–right wheelbase inconsistency The front and rear wheelbase measurements are not equal side-to-side.…
Read full complaint
Vehicle Cannot Be Safely Driven – Structural / Suspension Defect Suspected – Dealer Claims “Repair Completed” Despite Unequal Wheelbase My vehicle is currently unsafe to operate, due to the following critical issues: ⸻ 1. Left–right wheelbase inconsistency The front and rear wheelbase measurements are not equal side-to-side. This is a strong indicator of structural deviation, such as: •Subframe misalignment •Control arm mounting point displacement •Deformed suspension components •Manufacturing or assembly error in chassis geometry ⸻ 2. Front caster angles remain abnormal •Left caster: 3.9° •Right caster: 4.9° •Cross-caster difference: 1.0° A 1° difference exceeds manufacturer tolerances and causes: •Vehicle drifting •Poor straight-line stability •Uneven steering return •Potential instability during emergency braking This is a safety-related steering geometry defect. ⸻ 3. Real-world driving confirms unsafe behavior The vehicle cannot maintain straight-line travel, the steering wheel is off-center, and the car exhibits instability at normal speeds. This makes the vehicle unsafe to drive. ⸻ 4. Despite these unresolved issues, the dealership insists the vehicle is “repaired” and demands that I pick it up. They refused to provide frame measurement reports or explanation for the unequal wheelbase. Returning a vehicle with unresolved steering and chassis geometry defects constitutes unsafe vehicle delivery. ⸻ Conclusion Based on unequal wheelbase, abnormal caster geometry, and inability to drive safely, this vehicle likely contains a structural or assembly defect. I formally request investigation, suspension geometry verification, and required action from the manufacturer, as this is a matter of public road safety.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Tacoma Hybrid and 2024-2025 Tacoma vehicles. The metal flange on the front and rear shock absorbers may corrode and fail, resulting in detachment of the external oil reservoir.
Consequence & remedy
Consequence: An oil reservoir that detaches can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front and rear shock absorber assemblies, as necessary, free of charge. Owner notification letters are expected to be mailed September 21, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB14 and 26TA14.
Additional source detail variants (2)
Suspension:rear:shock Absorber
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Tacoma Hybrid and 2024-2025 Tacoma vehicles. The metal flange on the front and rear shock absorbers may corrode and fail, resulting in detachment of the external oil reservoir.
Consequence: An oil reservoir that detaches can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front and rear shock absorber assemblies, as necessary, free of charge. Owner notification letters are expected to be mailed September 21, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB14 and 26TA14.
Suspension:front:shock Absorber
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024 Tacoma Hybrid and 2024-2025 Tacoma vehicles. The metal flange on the front and rear shock absorbers may corrode and fail, resulting in detachment of the external oil reservoir.
Consequence: An oil reservoir that detaches can create a road hazard, increasing the risk of a crash.
Remedy: Dealers will inspect and replace the front and rear shock absorber assemblies, as necessary, free of charge. Owner notification letters are expected to be mailed September 21, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB14 and 26TA14.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Toyota Tundra, Tacoma Hybrid, Tacoma, RAV4 Hybrid, Land Cruiser Hybrid, Lexus GX550, 2024-2026 Tundra Hybrid, 2025 Sequoia Hybrid, Crown Signia, Grand Highlander, Lexus TX500 Hybrid, Lexus NX350 Hybrid, 2025-2026 Grand Highlander Hybrid, and Lexus TX350 vehicles. The load carrying capacity modification label may display inaccurate added weight values. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: A vehicle with an incorrect maximum capacity weight value may be overloaded, which can increase the risk of a crash.
Remedy: Dealers will replace the load carrying capacity modification label, free of charge. Owner letters were mailed May 26, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26LB04, 26LA04, 26TB07, and 26TA07.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2025 Tacoma and Tacoma Hybrid vehicles. The front driveshaft constant-velocity (CV) joint may deform and break.
Consequence & remedy
Consequence: A broken driveshaft can impair steering. Vehicles with full-time 4WD may experience a vehicle rollaway while parked without the parking brake applied. Both scenarios increase the risk of a crash.
Remedy: Dealers will inspect and replace both front driveshaft assemblies as necessary, free of charge. Owner letters were mailed August 11, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB11 and 25TA11.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2024 Toyota Venza, 2023-2025 RAV4 Prime, RAV4, Highlander, GR Corolla, Crown, 2024-2025 Lexus TX, LS, Toyota Tacoma, Grand Highlander, and 2025 Lexus RX, Toyota Crown Signia, Camry, RAV 4 Plug-in Hybrid (PHEV), and 4 Runner vehicles. Due to an error in the instrument panel software at vehicle startup, the instrument panel may fail to display vehicle speed, brake system, and tire pressure warning lights.
Consequence & remedy
Consequence: An instrument panel display that does not show critical information can increase the risk of a crash or injury.
Remedy: Dealers will update the instrument panel software over-the-air (OTA) for non-PHEV vehicles, free of charge. For PHEV vehicles, dealers will inspect the instrument panel assembly, and either replace it, or update the software, free of charge. Owner letters were mailed December 5, 2025. Additional letters will be sent, anticipated in May 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB08 and 25TA08. Lexus' numbers for this recall are 25LB05 and 25LA05.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Tacoma 4-wheel drive vehicles. The rear brake hoses can be damaged if mud and dirt builds up inside the rear wheels. This can result in a brake fluid leak.
Consequence & remedy
Consequence: A brake fluid leak can reduce braking ability and increase the risk of a crash.
Remedy: Dealers will replace both rear brake hoses, free of charge. Owner letters were mailed August 1, 2025. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB04 and 25TA04.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Defect investigations
0
No exact-year investigations in this snapshot.
An investigation is not a finding of a defect, and closure does not prove a vehicle is problem-free.
Illustration