Counts are not failure probabilities and are not adjusted for sales, age, mileage exposure or reporting. One report may name several categories. Comparison method and limitations.
I am reporting a safety defect in the 2025 Toyota Highlander Hybrid Nightshade involving the multifunction turn signal switch. The interior trim adhesive on the steering column has experienced a chemical breakdown (adhesive migration), causing the turn signal stalk to become stiff and bind. This obstruction makes it difficult to…
Read full complaint
I am reporting a safety defect in the 2025 Toyota Highlander Hybrid Nightshade involving the multifunction turn signal switch. The interior trim adhesive on the steering column has experienced a chemical breakdown (adhesive migration), causing the turn signal stalk to become stiff and bind. This obstruction makes it difficult to engage the turn signal and occasionally prevents the signal from "auto-canceling" after a turn. The dealership has acknowledged the adhesive failure by authorizing the replacement of the steering column covers but refuses to replace the contaminated turn signal switch. Operating a vehicle with a binding turn signal switch is a direct safety hazard, as it compromises the driver's ability to communicate intent to other motorists. Additionally, the dashboard material is experiencing systemic delamination and producing a white crystalline powder (crystallized adhesive). I am requesting an investigation into the heat-resistance standards of the interior bonding agents used in the 2025 Nightshade trim, as these materials are failing and compromising safety-critical electronic controls. Thank XXX XXX
NHTSA ODI #11711474
Mileage unknown · Sep 26, 2025
Unknown Or Other
While waiting for a traffic light to change, I pressed the pedal to accelerate, and the car would not move. Like my pedal was dead. I have experienced this issue three times. I have also experienced bucking or jerking issues.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2021-2025 Highlander and Highlander Hybrid vehicles. The second-row seat backs may fail to lock into position during seat back adjustment.
Consequence & remedy
Consequence: A seat back that fails to lock may not properly restrain an occupant during a crash, increasing the risk of injury.
Remedy: Dealers will replace the return springs in the seat back recliner assemblies, free of charge. Owner letters were mailed September 9, 2026. This is a phased recall. Owners may contact Toyota’s customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB06 and 26TA06.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2024-2025 Highlander and Highlander Hybrid vehicles. The third row center seat belt roof anchor may have been installed at an incorrect angle, preventing the seat belt from properly restraining the occupant.
Consequence & remedy
Consequence: A seat belt that does not properly restrain an occupant increases the risk of injury during a crash.
Remedy: Dealers will reinstall the seat belt anchor with a new bolt, free of charge. Owner notification letters were mailed January 27, 2026. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is 25TA16.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2022-2026 Toyota, Lexus, and Subaru Solterra vehicles equipped with a Panoramic View Monitor (PVM) system. Please see the recall report for a complete list of models. A software error may cause the rearview camera to freeze or display a blank screen when the vehicle is in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Consequence & remedy
Consequence: A rearview camera that fails to display an image can reduce the driver's view behind the vehicle, increasing the risk of a crash.
Remedy: Dealers will update the parking assist software, free of charge. Owner letters were mailed January 2, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB13 and 25LB06. Subaru's number for this recall is WRE25.
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2023-2024 Toyota Venza, 2023-2025 RAV4 Prime, RAV4, Highlander, GR Corolla, Crown, 2024-2025 Lexus TX, LS, Toyota Tacoma, Grand Highlander, and 2025 Lexus RX, Toyota Crown Signia, Camry, RAV 4 Plug-in Hybrid (PHEV), and 4 Runner vehicles. Due to an error in the instrument panel software at vehicle startup, the instrument panel may fail to display vehicle speed, brake system, and tire pressure warning lights.
Consequence & remedy
Consequence: An instrument panel display that does not show critical information can increase the risk of a crash or injury.
Remedy: Dealers will update the instrument panel software over-the-air (OTA) for non-PHEV vehicles, free of charge. For PHEV vehicles, dealers will inspect the instrument panel assembly, and either replace it, or update the software, free of charge. Owner letters were mailed December 5, 2025. Additional letters will be sent, anticipated in May 2026. This is a phased recall. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 25TB08 and 25TA08. Lexus' numbers for this recall are 25LB05 and 25LA05.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Defect investigations
0
No exact-year investigations in this snapshot.
An investigation is not a finding of a defect, and closure does not prove a vehicle is problem-free.
Illustration