NHTSA owner reports · September 18, 2026 snapshot.
What owners actually said
22 reports117,000 miles · Jul 2, 2019
Fuel/propulsion System
THE HYBRID INVERTER FAILED WHEN ACCELERATING FROM A RED LIGHT. A LOUD CLUNK WAS HEARD AND THE CAR WOULD NOT MOVE FORWARD. THE ENGINE WAS STILL RUNNING BUT CAR WOULD NOT ACCELERATE AND HAD TO BE PUSHED OUT OF THE ROAD. "CHECK HYBRID SYSTEM" WARNING FLASHED. CAR WAS TOWED TO A DEALER WHO CONFIRMED THAT IT WAS NOT COVERED BY THE WA…
Read full complaint
THE HYBRID INVERTER FAILED WHEN ACCELERATING FROM A RED LIGHT. A LOUD CLUNK WAS HEARD AND THE CAR WOULD NOT MOVE FORWARD. THE ENGINE WAS STILL RUNNING BUT CAR WOULD NOT ACCELERATE AND HAD TO BE PUSHED OUT OF THE ROAD. "CHECK HYBRID SYSTEM" WARNING FLASHED. CAR WAS TOWED TO A DEALER WHO CONFIRMED THAT IT WAS NOT COVERED BY THE WARRANTY AT 9 YEARS, 117K MILES (WARRANTY IS 8 YEARS, 110K MILES). THE PREVIOUS RECALLS FOR THE HYBRID INVERTER HAD BEEN COMPLETED ~3 YEARS AGO AND SO THE RECALL ALSO WOULD NOT COVER THE REPAIR. THE QUOTED COST OF THE REPAIR IS ~$11K.
NHTSA ODI #11228964
120,000 miles · Mar 24, 2019
Unknown Or Other
ALL DOORS AND HATCH DO NOT LOCK WITH THE KEY FOB OR WITH THE POWER LOCKS ON BOTH THE PASSENGER AND DRIVER SIDE DOORS.
NHTSA ODI #11191154
80,000 miles · Nov 4, 2018
Service Brakes
ABS - CODE -1391,THIS IS SECOND TIME,FIRST TIME(2016) WAS CHANGED THIS PART -44510-48080
NHTSA ODI #11145191
61,050 miles · Oct 24, 2018
Structure
WHILE USING THE TAILGATE CLOSE BUTTON ON THE KEY FOB,CAR SHUT OFF AND PARKED, A LOUD BANG WAS HEARD WHILE THE DOOR WAS CLOSING AND THE DOOR JAMMED, SLIGHTLY OPENED AND IMMOVABLE. HAD TO TAKE THE CAR TO A CERTIFIED TOYOTA REPAIR FACILITY TO GET THE CLOSING SERVO DISCONNECTED SO THE DOOR WOULD SHUT. MANUAL OPERATION OF THE DOOR IS…
Read full complaint
WHILE USING THE TAILGATE CLOSE BUTTON ON THE KEY FOB,CAR SHUT OFF AND PARKED, A LOUD BANG WAS HEARD WHILE THE DOOR WAS CLOSING AND THE DOOR JAMMED, SLIGHTLY OPENED AND IMMOVABLE. HAD TO TAKE THE CAR TO A CERTIFIED TOYOTA REPAIR FACILITY TO GET THE CLOSING SERVO DISCONNECTED SO THE DOOR WOULD SHUT. MANUAL OPERATION OF THE DOOR IS THE ONLY WAY TO OPEN AND CLOSE AT THIS TIME. NOTHING WAS BLOCKING THE DOOR AS IT WAS CLOSING AND COMPLETE REPAIR APPEARS TO BE VERY EXPENSIVE. BACK DOOR HINGES APPEAR TO BE SLIGHTLY OUT OF LINE BUT DOOR WILL CLOSE MANUALLY. T-SB-0038-15 ADDRESSES A PROBLEM SIMILAR TO THIS BUT THE DOOR WOULD OPEN - IN THIS CASE IT WOULD NOT UNTIL THE TOYOTA SERVICEMAN REMOVED THE SERVO.
NHTSA ODI #11142413
15 miles · May 26, 2018
Service Brakes
I ALMOST GOT IN TO AN ACCIDENT ON 5/11/2018 DUE TO THE ABS SYSTEM NOT STOPPING THE VEHICLE WHILE DRIVING IN I-95. I GOT A WARNING LIGHT ON THE DASH AS I WAS PRESSING THE BRAKES, LATER THE CAR DID NOT WANTED TO STOP, BUT IT DID NOT PREVENT ME FROM HITTING THE OTHER CAR. I PRESS ON THE EMERGENCY BRAKE AND I WAS ABLE TO STOP THE …
Read full complaint
I ALMOST GOT IN TO AN ACCIDENT ON 5/11/2018 DUE TO THE ABS SYSTEM NOT STOPPING THE VEHICLE WHILE DRIVING IN I-95. I GOT A WARNING LIGHT ON THE DASH AS I WAS PRESSING THE BRAKES, LATER THE CAR DID NOT WANTED TO STOP, BUT IT DID NOT PREVENT ME FROM HITTING THE OTHER CAR. I PRESS ON THE EMERGENCY BRAKE AND I WAS ABLE TO STOP THE CAR. LATER, I TOOK THE CAR TO GET DIAGNOSE AND PUT ERROR CODES C1391, ABS ACCUMULATOR LEAK OR MALFUNCTION. CONTACTED DELRAY TOYOTA IN DELRAY BEACH, FL AND THEY DENY TO DO A RECALL WHEN THERE IS AN EXTENTED WARRANTY RECALL ON CAMRY AND PRIUS MODEL LINE FOR THE SAME PROBLEM. CALLED TOYOTA CORP. AND THEY ARE DENYING TO DO ANYTHING TO FIX THE SAFETY PROBLEM WITH THIS VEHICLE. THEY STATED THAT SINCE THERE WERE NOT ENOUGH BUYERS FOR THIS MODEL, THEY WILL NOT COVER OR MAKE A RECALL ON SAFETY FOR THE PUBLIC. I HAVE FOUND OVER ALL THE INTERNET COMPLAINTS ABOUT THE SAME ISSUE. I AM LOOKING FOR A RESOLUTION. A PICTURE OF THE ERRORS CODES ON THE VEHICLE IS INCLUDED ON THE COMPLAINT.
NHTSA ODI #11098111
112,000 miles · Apr 9, 2018
Steering
DEFECTIVE INTERMEDIATE STEERING SHAFT. CLUNKING, ETC. SEEMS DANGEROUS, NO RECALL.... THIS IS ONE COMPLAINT TO ADD TO THE NUMEROUS OTHERS. TOYOTA, WHEN ARE YOU GOING TO DO SOMETHING ABOUT THIS?
NHTSA ODI #11084019
90,000 miles · Jan 5, 2018
Service Brakes
I WAS DRIVING TO PICK UP MY SON WHEN A BRAKE MALFUNCTION WARNING LIGHT CAME ON INDICATING A PROBLEM WITH ABS SYSTEM. AFTER PICKING UP MY SON I WENT DIRECTLY TO THE DEALER AND THE FOUND THE PROBLEM WAS GIVEN BY CODE C1391, A BRAKE ACCUMULATOR VACUUM LEAK. WAS TOLD VEHICLE WAS UNSAFE TO DRIVE WITHOUT REPAIR, INTERNAL PRESSURE LO…
Read full complaint
I WAS DRIVING TO PICK UP MY SON WHEN A BRAKE MALFUNCTION WARNING LIGHT CAME ON INDICATING A PROBLEM WITH ABS SYSTEM. AFTER PICKING UP MY SON I WENT DIRECTLY TO THE DEALER AND THE FOUND THE PROBLEM WAS GIVEN BY CODE C1391, A BRAKE ACCUMULATOR VACUUM LEAK. WAS TOLD VEHICLE WAS UNSAFE TO DRIVE WITHOUT REPAIR, INTERNAL PRESSURE LOSS COULD PREVENT CAR FROM STOPPING IN A PANIC SITUATION. ALTHOUGH IT APPEARS THIS IS COVERED BY WARRANTY EXTENSION FOR SOME MODEL YEARS OF HIGHLANDER, CAMRY AND PRIUS, TOYOTA WOULD NOT EXTEND SAME COURTESY TO ME, NOR WAS DEALER ABLE TO OFFER ME A GOODWILL ADJUSTMENT. PUMP ASSEMBLY AND ACTUATOR ASSEMBLY PARTS AND REPAIR COST ABOUT $5300.00. VEHICLE WAS PURCHASED NEW FROM THE DEALER, HAD ALL RECOMMENDED AND NECESSARY MAINTENANCE AT DEALER ON DEALER SCHEDULE. *BF *TR
NHTSA ODI #11060726
60 miles · Mar 5, 2016
Steering
VERY COMMON PROBLEM IS BEING REPORTED IN ALL OF THE HIGHLANDERS OF 2008 FORWARD. AT LOW MILEAGE, THE STEERING COLUMN HAS A BEARING IN IT CALLED A STUB SHAFT BUT APPARENTLY GETS LOOSE LEAVING TO A CLUNK AND LOOSENESS IN THE STEERING. IT IS SO COMMON THAT OUR DEALER HAS TO KEEP MULTIPLE REPLACEMENT PARTS IN STOCK. PEOPLE ARE REPO…
Read full complaint
VERY COMMON PROBLEM IS BEING REPORTED IN ALL OF THE HIGHLANDERS OF 2008 FORWARD. AT LOW MILEAGE, THE STEERING COLUMN HAS A BEARING IN IT CALLED A STUB SHAFT BUT APPARENTLY GETS LOOSE LEAVING TO A CLUNK AND LOOSENESS IN THE STEERING. IT IS SO COMMON THAT OUR DEALER HAS TO KEEP MULTIPLE REPLACEMENT PARTS IN STOCK. PEOPLE ARE REPORTING THIS WITHIN THE 36,000 MILE WARRANTY, MY CAR BEGAN TO DO IT AT ABOUT 60,000 MILES. IT IS A $700 REPAIR. LOSS OF CONTROL OF THE VEHICLE IS POSSIBLE.
NHTSA ODI #10840076
52,000 miles · Jan 9, 2016
Vehicle Speed ControlCrashInjury
ACCELERATOR MOVED TO FULL SPEED AS BACKING UP BEGAN. AUTO PLOWED 110 FEET FULL SPEED THROUGH PLANTS AND TREES, COMING TO A STOP BY SOME TREES. CAR WAS PARKED ON PRIVATE DRIVEWAY. DRIVER SLIGHTLY INJURED. REAR END CAR DAMAGE IS $6,000+.
NHTSA ODI #10819165
30,000 miles · Dec 21, 2015
Unknown Or Other
DOOR LOCKS ON PASSENGER FRONT AND REAR, DRIVER FRONT AND REAR, HAVE ALL BEEN REPLACED OR REPAIRED AT LEAST TWICE DUE TO MALFUNCTIONS. AS OF DECEMBER 2015, THE LOCKS ARE FAILING AGAIN FOR A THIRD TIME, CREATING A SAFETY HAZARD. LOCKS DON'T WORK. THEY WILL EITHER STAY LOCKED, FAILING TO OPEN, OR NOW, THEY WILL NOT LOCK AT ALL. …
Read full complaint
DOOR LOCKS ON PASSENGER FRONT AND REAR, DRIVER FRONT AND REAR, HAVE ALL BEEN REPLACED OR REPAIRED AT LEAST TWICE DUE TO MALFUNCTIONS. AS OF DECEMBER 2015, THE LOCKS ARE FAILING AGAIN FOR A THIRD TIME, CREATING A SAFETY HAZARD. LOCKS DON'T WORK. THEY WILL EITHER STAY LOCKED, FAILING TO OPEN, OR NOW, THEY WILL NOT LOCK AT ALL. THIS IS AN ONGOING PROBLEM THAT HAS NEVER BEEN FIXED PROPERLY. KEEPS RECURRING.
NHTSA ODI #10811502
Official recalls
4Oct 22, 2015
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.
Consequence & remedy
Consequence: If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
Remedy: Toyota will notify owners, and dealers will inspect the switch, applying a lubricant if no abnormality is found. If abnormality is found, the PWMS circuit board will be replaced, free of charge. The recall is expected to begin December 20, 2015. Owners may contact Toyota customer service at 1-800-331-4331. Toyota's number for this recall is C0M.
Sep 4, 2013
Toyota is recalling certain model year 2006-2010 Highlander hybrid vehicles manufactured February 16, 2005, through July 29, 2010; and model year 2006-2008 Lexus RX400h vehicles manufactured February 23, 2005, through December 2, 2008. The Intelligent Power Module (IPM) inside the inverter module may contain transistors that have higher operating temperatures than the solder can support and the transistors may be heat damaged by the solder. If this occurs, various warning lamps, including the malfunction indicator lamp, slip indicator light, brake system warning light, and master warning light, will be illuminated on the instrument panel.
Consequence & remedy
Consequence: The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. It is possible that the hybrid system will shut down while the vehicle is being driven, causing the vehicle to stall unexpectedly, increasing the risk of a crash.
Remedy: Toyota will notify owners, and dealers will replace the IPM free of charge. Owners may contact Toyota at 1-800-331-4331. Vehicles that had their IPM replaced under recall 11V-342 are not affected by this campaign.
Apr 9, 2013
Southeast Toyota is recalling certain model year 2008 and 2010-2013 Toyota Tundra, 2010-2012 Rav4, 2012 Toyota Sequoia, 2010-2011 Toyota Corolla, 2010-2011 Toyota Camry and Camry Hybrid, 2010-2013 Toyota Highlander and Highlander Hybrid, 2010-2013 Toyota FJ Cruiser, 2011 Toyota Land Cruiser, 2010-2013 Toyota Venza, 2010-2011 Toyota 4Runner, 2010-2013 Toyota Tacoma, 2011-2012 Toyota Sienna, 2012 Toyota Prius, 2013 Scion FR-S, 2011 Scion XD, 2011 Scion XB, and 2012 Scion TC vehicles. These vehicles were sold with labels that were outside the allowable one percent of accuracy of actual weight added. Thus, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) Number 110, "Tire Selection and Rims."
Consequence & remedy
Consequence: An inaccurate label could lead to owners overloading their vehicles and tires. An overloaded vehicle can result in a tire failure which may result in a vehicle crash, personal injury, or property damage.
Remedy: Southeast Toyota will notify owners and provide a corrected label with instructions concerning its installation. A small group of the affected vehicles will need additonal remedies which are still being developed. The recall began on May 28, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Jan 16, 2013
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.
Consequence & remedy
Consequence: If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy: Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Additional source detail variants (2)
Seats
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.
Consequence: If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy: Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Air Bags:frontal:sensor/control MODULE-INACTIVE
Southeast Toyota Distributors, LLC (SET) is recalling certain models interspersed through model years 2009 through 2013 as follows: model year 2009-2012 Tacoma, 4Runner, Camry, Camry Hybrid, Prius, and RAV4; model year 2009-2010 Avalon, FJ Cruiser, and Highlander Hybrid; model year 2010-2013 model year Corolla, Sienna and Tundra; model year 2009-2013 Highlander and Venza; model year 2012 Prius V; and model year 2010-2012 Sequoia. During modification by SET to include accessories such as leather seat covers, seat heaters or headrest DVD systems, these vehicles may not have had the passenger seat occupant sensing system calibration tested. Without passing the calibration test, the occupant sensing system may not operate as designed.
Consequence: If the front passenger seat occupant sensing system is out of calibration, the front passenger airbags may not deploy or they may deploy inappropriately for the passenger's size and position. This could increase the risk of personal injury during the event of a vehicle crash necessitating airbag deployment.
Remedy: Southeast Toyota will notify owners, and dealers will test the sensitivity of the occupant detection sensors, and recalibrate them as necessary. The recall began on March 21, 2013. Owners may contact Southeast Toyota at 1-800-301-6859.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
3DP22005 · Pedestrian Alert Sounds
Opened Jan 27, 2023 · Closed Aug 7, 2023
Status: closed (inferred from source dates) · Electrical System:propulsion System
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
EA18006 · Steering Column Separation
Opened Nov 16, 2018 · Closed Apr 2, 2024
Status: closed (inferred from source dates) · Steering; Steering:column
On November 16, 2018, the Office of Defects Investigation (ODI) opened an Engineering Analysis (EA18-006) as an upgrade to a Preliminary Evaluation (PE18-005). The investigation focused on allegations of steering wheel separation from the lower steering column after using the tilt and/or telescoping mechanism. Given the separation occurring when operating the tilt and/or telescoping function and failure of both shear capsules to maintain the lower steering column mounting position, potential for shear capsule damage in the known failures due to collisions, the overall low rate of occurrence, and the updated manufacturer documentation, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists. The agency reserves right to take further action if warranted by the circumstances. A detailed summary of the investigation is attached to this closing resume. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Additional source detail variants (2)
Steering:column
On November 16, 2018, the Office of Defects Investigation (ODI) opened an Engineering Analysis (EA18-006) as an upgrade to a Preliminary Evaluation (PE18-005). The investigation focused on allegations of steering wheel separation from the lower steering column after using the tilt and/or telescoping mechanism. Given the separation occurring when operating the tilt and/or telescoping function and failure of both shear capsules to maintain the lower steering column mounting position, potential for shear capsule damage in the known failures due to collisions, the overall low rate of occurrence, and the updated manufacturer documentation, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists. The agency reserves right to take further action if warranted by the circumstances. A detailed summary of the investigation is attached to this closing resume. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Steering
On November 16, 2018, the Office of Defects Investigation (ODI) opened an Engineering Analysis (EA18-006) as an upgrade to a Preliminary Evaluation (PE18-005). The investigation focused on allegations of steering wheel separation from the lower steering column after using the tilt and/or telescoping mechanism. Given the separation occurring when operating the tilt and/or telescoping function and failure of both shear capsules to maintain the lower steering column mounting position, potential for shear capsule damage in the known failures due to collisions, the overall low rate of occurrence, and the updated manufacturer documentation, this investigation is closed. The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists. The agency reserves right to take further action if warranted by the circumstances. A detailed summary of the investigation is attached to this closing resume. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
PE18005 · Upper Steering Column Separation
Opened May 4, 2018 · Closed Nov 20, 2018
Status: closed (inferred from source dates) · Steering; Steering:column
On May 4, 2018, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18-005 to investigate three allegations of steering column separation for Model Year (MY) 2008 through 2013 Toyota Highlander vehicles. Two (2) of the 3 complaints were received by ODI in April 2018 and occurred while the vehicle was in motion. Since opening PE18-005, one (1) additional VOQ involving steering column separation has been received. This incident occurred while the vehicle was stationary.As part of PE18-005, ODI examined the field data, warranty data, and relevant technical information submitted by Toyota in response to the PE18-005 information request letter. Ten (10) additional incidents of steering column separation were identified. Four (4) of these instances occurred while driving. During PE18-005, ODI confirmed that the steering columns in the subject vehicles are equipped with breakaway capsules that are designed to collapse/shear during certain types of vehicle collisions. This design feature aims to reduce driver injury severity from impact with the steering wheel in frontal vehicle collisions. There is no direct method for detecting when the capsules in the subject vehicles have sheared. If the driver operates the tilt/telescoping feature after the breakaway capsules have separated, the steering column may drop out of position and could subsequently detach entirely from the rest of the steering assembly. Loss of steering while driving may cause a loss of vehicle control, which could lead to a vehicle crash.To date, ODI has identified 14 incidents involving complete steering column separation, 6 of which occurred while driving. One of these incidents involved a minor crash. Additionally, there have been 16 events where the steering column dropped from the dashboard mounting brackets, but column separation did not occur. Four of these incidents happened while driving. Of these 30 total separation/drop incidents, 5 of the vehicles have evidence of minor collision repairs months or years prior to the steering column failure.This investigation has been upgraded an to Engineering Analysis (EA18-006) in order to 1) conduct a more detailed analysis of the conditions that may cause the steering column breakaway capsules to separate and 2) assess factors that may contribute to the problem of failing to detect and repair breakaway capsules after they have separated. Toyota has recently revised their repair manual and issued a Collision Repair Information Bulletin to help address the second concern.The VOQs associated with this investigation can be viewed at www.NHTSA.gov under the following ODI complaint numbers: 11141761, 11083623, 11083280, 10888043.
Additional source detail variants (2)
Steering:column
On May 4, 2018, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18-005 to investigate three allegations of steering column separation for Model Year (MY) 2008 through 2013 Toyota Highlander vehicles. Two (2) of the 3 complaints were received by ODI in April 2018 and occurred while the vehicle was in motion. Since opening PE18-005, one (1) additional VOQ involving steering column separation has been received. This incident occurred while the vehicle was stationary.As part of PE18-005, ODI examined the field data, warranty data, and relevant technical information submitted by Toyota in response to the PE18-005 information request letter. Ten (10) additional incidents of steering column separation were identified. Four (4) of these instances occurred while driving. During PE18-005, ODI confirmed that the steering columns in the subject vehicles are equipped with breakaway capsules that are designed to collapse/shear during certain types of vehicle collisions. This design feature aims to reduce driver injury severity from impact with the steering wheel in frontal vehicle collisions. There is no direct method for detecting when the capsules in the subject vehicles have sheared. If the driver operates the tilt/telescoping feature after the breakaway capsules have separated, the steering column may drop out of position and could subsequently detach entirely from the rest of the steering assembly. Loss of steering while driving may cause a loss of vehicle control, which could lead to a vehicle crash.To date, ODI has identified 14 incidents involving complete steering column separation, 6 of which occurred while driving. One of these incidents involved a minor crash. Additionally, there have been 16 events where the steering column dropped from the dashboard mounting brackets, but column separation did not occur. Four of these incidents happened while driving. Of these 30 total separation/drop incidents, 5 of the vehicles have evidence of minor collision repairs months or years prior to the steering column failure.This investigation has been upgraded an to Engineering Analysis (EA18-006) in order to 1) conduct a more detailed analysis of the conditions that may cause the steering column breakaway capsules to separate and 2) assess factors that may contribute to the problem of failing to detect and repair breakaway capsules after they have separated. Toyota has recently revised their repair manual and issued a Collision Repair Information Bulletin to help address the second concern.The VOQs associated with this investigation can be viewed at www.NHTSA.gov under the following ODI complaint numbers: 11141761, 11083623, 11083280, 10888043.
Steering
On May 4, 2018, the Office of Defects Investigation (ODI) opened Preliminary Evaluation PE18-005 to investigate three allegations of steering column separation for Model Year (MY) 2008 through 2013 Toyota Highlander vehicles. Two (2) of the 3 complaints were received by ODI in April 2018 and occurred while the vehicle was in motion. Since opening PE18-005, one (1) additional VOQ involving steering column separation has been received. This incident occurred while the vehicle was stationary.As part of PE18-005, ODI examined the field data, warranty data, and relevant technical information submitted by Toyota in response to the PE18-005 information request letter. Ten (10) additional incidents of steering column separation were identified. Four (4) of these instances occurred while driving. During PE18-005, ODI confirmed that the steering columns in the subject vehicles are equipped with breakaway capsules that are designed to collapse/shear during certain types of vehicle collisions. This design feature aims to reduce driver injury severity from impact with the steering wheel in frontal vehicle collisions. There is no direct method for detecting when the capsules in the subject vehicles have sheared. If the driver operates the tilt/telescoping feature after the breakaway capsules have separated, the steering column may drop out of position and could subsequently detach entirely from the rest of the steering assembly. Loss of steering while driving may cause a loss of vehicle control, which could lead to a vehicle crash.To date, ODI has identified 14 incidents involving complete steering column separation, 6 of which occurred while driving. One of these incidents involved a minor crash. Additionally, there have been 16 events where the steering column dropped from the dashboard mounting brackets, but column separation did not occur. Four of these incidents happened while driving. Of these 30 total separation/drop incidents, 5 of the vehicles have evidence of minor collision repairs months or years prior to the steering column failure.This investigation has been upgraded an to Engineering Analysis (EA18-006) in order to 1) conduct a more detailed analysis of the conditions that may cause the steering column breakaway capsules to separate and 2) assess factors that may contribute to the problem of failing to detect and repair breakaway capsules after they have separated. Toyota has recently revised their repair manual and issued a Collision Repair Information Bulletin to help address the second concern.The VOQs associated with this investigation can be viewed at www.NHTSA.gov under the following ODI complaint numbers: 11141761, 11083623, 11083280, 10888043.
Illustration