2005 Suzuki GSX-R750

I WAS RIDING THE MOTORCYCLE WHICH I ONLY HAD FOR 10 DAYS AND GAVE IT SOME GAS AND THE FRONT END CAME UP THAN DOWN, NOTHING MAJOR THAN A FEW SECONDS LATER THE FRONT END JUST DOVE INTO THE GROUND. IT WAS GOING APPROXIMATELY 25 - 30 MPH ON A PRIVATE ROAD AS THE SPEED LIMIT WAS IS. THE MOTORCYCLE HAD FRAME SLIDERS TO PROTECT IT IN EVENT OF A CRASH, BUT AFTER THE CRASH I GOT UP TO PICK UP THE MOTORCYCLE AND THE 2 WELDS ON THE NECK OF THE FRAME SPLIT DOWN THE MIDDLE COMPLETELY. I CONTACTED SUZUKI , AND THEY SENT A REPRESENTATIVE, WHO HAD RACED AND SAID HE'D NEVER SEEN ANYTHING LIKE THAT BEFORE HAPPENING SO HE SENT A REPORT TO SUZUKI HEADQUARTERS, AND THEY CONTACTED ME AND WERE NOT NICE . THEN, I HAD A CERTIFIED WELD INSPECTOR DO AN VISUAL EVALUATION AND HIS REPORT STATED THAT VISUAL INSPECTION OF WELDS REVEALED LACK OF FUSION WHICH MAY HAVE CAUSED WELD FAILURE. AND HE SAID THAT I SHOULD BE ABLE TO DROP THE MOTORCYCLE FROM 4 STORIES AND THE WELDS SHOULD NOT BREAK, THE MOTORCYCLE MAYBE, BUT THE WELDS SHOULD NEVER BREAK AND CERTAINLY NOT SPLIT. ALL THAT BROKE ON THE OTHER THAN THAT WAS ONE TURN SIGNAL, WHICH WAS PLASTIC. IT WAS THE ONLY OTHER DAMAGE, THE MOTORCYCLE STILL STARTS AND RUNS, BUT 2 SPLIT WELDS ON BOTH SIDES, LEFT AND RIGHT, BUT THE MOTORCYCLE ONLY FELL ON THE RIGHT SIDE.*AK

I WAS RIDING MY MOTORCYCLE (2005 SUZUKI GSX-R750) AT ABOUT 25 MILES PER HOUR AND I CRASHED. IT WAS UNEXPECTED THERE WERE NO OBSTRUCTIONS IN THE ROAD, I WAS JUST RIDING AND NEXT THING I KNOW I'M ROLLING OVER. I GOT UP AND WENT OVER TO MY BIKE AND NOTICED THE TWO WELDS HAD CRACKED AND BROKEN ON BOTH SIDES OF THE FRAME, WHICH WAS ODD BECAUSE THE BIKE JUST SLID ON MY FRAME SLIDERS I HAD INSTALLED WHICH ARE JUST SOFT PLASTIC. THE DAMAGE TO THE BIKE WAS QUITE MINIMAL, MY MIRROR, BRAKE LEVER, BAR END, BRAKE PEDAL, FOOT PEG AND MUFFLER WERE ALL STILL INTACT, BUT BOTH SIDES OR MY FRAME HAD SPLIT RIGHT DOWN THE MIDDLE BETWEEN THE 2 WELDS. I HAD A CERTIFIED WELD INSPECTOR COME LOOK AT THE BIKE AND HIS REPORT STATED " VISUAL INSPECTION OF THE SAID WELD REVEALS LACK OF FUSION WHICH MY HAVE CAUSED WELD FAILURE" SO I TOOK THE BIKE TO THE DEALER AND THEIR HEAD MECHANIC TOOK PICTURES AND SENT THEM TO SUZUKI AND A SUZUKI REPRESENTATIVE FLEW UP FROM CALIFORNIA AND MET WITH US AND SAW THE BIKE AND SAID THAT THE BREAK SHOULD NOT HAVE HAPPENED ANT THAT A 100 MPH CRASH SHOULDN'T EVEN DO THIS, SO HE SUBMITTED A REPORT TO SUZUKI AND STATED THAT WE SHOULD HEAR FROM A MAN NAMED " BRENT ROSS IN 4-5 DAYS, O I WAITED AND GOT NOTHING SO I CALLED THEIR CONSUMER DEPARTMENT AND TRACKED HI DOWN AND WAS TOLD THAT BASICALLY THAT I COULDN'T DO ANYTHING AND THAT SUZUKI HAS MANY ATTORNEYS. I HAVE AN ATTORNEY AND ARE LOOKING FOR A LAB THAT CAN PERFORM A RADIOLOGY OR X-RAY OR METALLURGICAL EXAM AND SAY WHETHER THE WELDS ARE FAULTY OR NOT. THE MOTORCYCLE IN QUESTION HAS NOT BEEN TOUCHED AND IS SITTING IN A WAREHOUSE AT MY WORK UN REPAIRED AND IN IT'S SAME CONDITION ON THE DATE OF THE INCIDENT. *JB