Steering wheel controls frequently fail to work properly on the cruise control system specially the speed control. Also the exhaust system bellow has cracked. The moonroof leaks into the cabin and floor area of the passenger side. Also leaking into the A pillar on the passenger side. I only have a picture of the engine valve cov…
Read full complaint
Steering wheel controls frequently fail to work properly on the cruise control system specially the speed control. Also the exhaust system bellow has cracked. The moonroof leaks into the cabin and floor area of the passenger side. Also leaking into the A pillar on the passenger side. I only have a picture of the engine valve cover that is leaking and had to be replaced. I have video of the exhaust leak coming from the crack in the bellow pipe. Do not have video of the cruise control speed issues as I can’t take a video while driving.
NHTSA ODI #11695930
Mileage unknown · Jul 26, 2024
Forward Collision Avoidance
The Eyesight system will malfunction and turn off at random times. The Automatic Emergency Braking and Forward Collision Warning will activate when there is nothing in front of my car causing it to brake abruptly. I have almost been in numerous collisions due to the random safety systems malfunctioning.
My 2016 Subaru Outback has gone through 5 batteries since purchase in 4/2016. The reason for my contact with you is that the Navigation function “eyesight” has been problematic for at least two years and began with the third of five batteries. The function stops working randomly at any hour of the day and in all conditions. Thi…
Read full complaint
My 2016 Subaru Outback has gone through 5 batteries since purchase in 4/2016. The reason for my contact with you is that the Navigation function “eyesight” has been problematic for at least two years and began with the third of five batteries. The function stops working randomly at any hour of the day and in all conditions. This year it went off and on in excess of 300-400 times. Each time it stops, cruise control, lane warnings, etc. are off. This can be harrowing with highway driving. On the three occasions I took it to the dealer the past two years they could not find a cause. After I replaced the battery again recently, they reset a DCM whose warranty had been extended by Subaru and that I brought in myself. There have been a number of parasitic drain tests, some finding a drain, others not on the batteries When the car was returned to me, the navigation system went off only once that same day but I presume it will go off in the future. I do not find the car or system reliable. The problem appears to be exceedingly hard to diagnose. Since these are the types of systems used with automatic and self driving car functions, I thought it important that you be made aware of the hazards these systems present.
NHTSA ODI #11600940
Mileage unknown · Jan 23, 2022
Forward Collision AvoidanceUnknown Or Other
I OWN A 2016 SUBARU OUTBACK. WHILE DRIVING APPROXIMATELY 40:MPH ON A LOCAL MAIN ROAD (CT RTE 10) THE EYESIGHT PRE-COLLISION BRAKE ASSIST SUDDENLY ACTIVATED AND CAUSED THE VEHICLE TO COMPLETELY STOP. THE BRAKES THEN RELEASED AND I WAS ABLE TO CONTINUE DRIVING. THIS IS THE SECOND INCIDENT WITH IN A MONTH THAT THIS HAS HAPPENED. …
Read full complaint
I OWN A 2016 SUBARU OUTBACK. WHILE DRIVING APPROXIMATELY 40:MPH ON A LOCAL MAIN ROAD (CT RTE 10) THE EYESIGHT PRE-COLLISION BRAKE ASSIST SUDDENLY ACTIVATED AND CAUSED THE VEHICLE TO COMPLETELY STOP. THE BRAKES THEN RELEASED AND I WAS ABLE TO CONTINUE DRIVING. THIS IS THE SECOND INCIDENT WITH IN A MONTH THAT THIS HAS HAPPENED. THE APPROXIMATE FAILURE MILEAGE WAS 104,000 THERE WERE NO PRIOR WARNING LIGHTS OR ENGINE LIGHTS ON. THE VEHICLE HAS NOT BEEN INSPECTED BY THE DEALER. THIS SUDDEN STOPPING CAN CAUSE AN ACCIDENT.
NHTSA ODI #11448563
5,000 miles · Mar 1, 2019
Forward Collision AvoidanceStructureUnknown Or OtherCrash
I HAD AN ACCIDENT @ 5PM-ENTERING A BUSY ROAD FROM A DRIVEWAY-HIT THE SIDE DOOR OF A CAR RACING LEFTTORIGHT IN FRONT OF ME. MY FAULT OF COURSE. I HEARD NO BEEP WARNING FROM THE SO-CALLED COLLISION MITIGATION SYSEM (?), NOR DID I FEEL ANY BRAKING. SUBSEQUENTLY I TESTED THIS FEATURE IN MY DRIVEWAY WHERE I SLOWLY DROVE THE CAR FOR…
Read full complaint
I HAD AN ACCIDENT @ 5PM-ENTERING A BUSY ROAD FROM A DRIVEWAY-HIT THE SIDE DOOR OF A CAR RACING LEFTTORIGHT IN FRONT OF ME. MY FAULT OF COURSE. I HEARD NO BEEP WARNING FROM THE SO-CALLED COLLISION MITIGATION SYSEM (?), NOR DID I FEEL ANY BRAKING. SUBSEQUENTLY I TESTED THIS FEATURE IN MY DRIVEWAY WHERE I SLOWLY DROVE THE CAR FORWARD TOWARD MY LARGE GARAGE, I WOULD HAVE HIT THE GARAGE-NO BEEP-NO BRAKING. THEN, IN A SNOW STORM, I HAD TO BRAKE SOASTO NOT HIT A LARGE TRUCK SKIDDING IN FRONT OF ME. I MISSED HITTING HIM BY INCHES. AGAIN, I HEARD NO BEEP AND FELT NO BRAKING. DEALER TESTED THIS FEATURE ON MY CAR BY LETTING IT GO TOWARDS BRUSHES IN A CARWASH, I HEARD BEEP WARNING, BUT AGAIN FELT NO BRAKING. DEALER SAID SYSTEM IS WORKING PROPERLY. AND SO-I CONCLUDE THAT WHENEVER I HEAR ANY KIND OF WARNING BEEO, I SHOULD MANUALLY AND QUICKLY 'HIT THE BRAKES', NO MATTER WHAT. AFTER ALL, I HAVE TO KEEP MY EYES ON THE ROAD FOR GOD'S SAKE. I AM NOT HAPPY.
NHTSA ODI #11183351
54,000 miles · Sep 28, 2018
Electrical SystemForward Collision Avoidance
TL* THE CONTACT OWNS A 2016 SUBARU OUTBACK. WHILE DRIVING APPROXIMATELY 45 MPH ON A LOCAL ROADWAY, THE EYESIGHT PRE-COLLISION BRAKE ASSIST SUDDENLY ACTIVATED AND CAUSED THE VEHICLE TO COMPLETELY STOP. THE BRAKES RELEASED SHORTLY AFTER THE FAILURE. THE DEALER (SUBARU OF DAYTON, 995 MIAMISBURG CENTERVILLE RD, WASHINGTON TOWNSHIP, …
Read full complaint
TL* THE CONTACT OWNS A 2016 SUBARU OUTBACK. WHILE DRIVING APPROXIMATELY 45 MPH ON A LOCAL ROADWAY, THE EYESIGHT PRE-COLLISION BRAKE ASSIST SUDDENLY ACTIVATED AND CAUSED THE VEHICLE TO COMPLETELY STOP. THE BRAKES RELEASED SHORTLY AFTER THE FAILURE. THE DEALER (SUBARU OF DAYTON, 995 MIAMISBURG CENTERVILLE RD, WASHINGTON TOWNSHIP, OH 45459, 1-(888) 431-9557) WAS NOTIFIED OF THE FAILURE. THE SERVICE CENTER MANAGER INDICATED THAT THE FAILURE WAS ESCALATED TO THE MANUFACTURER. THE VEHICLE WAS NOT DIAGNOSED OR REPAIRED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE AND THE CONTACT WAS WAITING FOR A FOLLOW-UP RESPONSE. THE VIN WAS NOT AVAILABLE. THE APPROXIMATE FAILURE MILEAGE WAS 54,000. *TT CONSUMER STATED CAR WAS TAKEN INTO THE DEALER AND SO INCIDENT SINCE. UPDATED 12/20/18*JB
NHTSA ODI #11132100
10,000 miles · Sep 9, 2016
Forward Collision Avoidance
TL* THE CONTACT OWNS A 2016 SUBARU OUTBACK. WHILE ATTEMPTING TO MAKE A TURN, THE VEHICLE EXPERIENCED HESITATION WHILE THE ACCELERATOR PEDAL WAS DEPRESSED. IN ADDITION, THE CONTACT STATED THAT THE FORWARD COLLISION AVOIDANCE SYSTEM MALFUNCTIONED AND THE VEHICLE EXPERIENCED UNINTENDED DECELERATION. THE VEHICLE WAS TAKEN TO THE DEA…
Read full complaint
TL* THE CONTACT OWNS A 2016 SUBARU OUTBACK. WHILE ATTEMPTING TO MAKE A TURN, THE VEHICLE EXPERIENCED HESITATION WHILE THE ACCELERATOR PEDAL WAS DEPRESSED. IN ADDITION, THE CONTACT STATED THAT THE FORWARD COLLISION AVOIDANCE SYSTEM MALFUNCTIONED AND THE VEHICLE EXPERIENCED UNINTENDED DECELERATION. THE VEHICLE WAS TAKEN TO THE DEALER, BUT THE FAILURE COULD NOT BE REPLICATED. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE FAILURE MILEAGE WAS APPROXIMATELY 10,000.
Subaru of America, Inc. (Subaru) is recalling certain 2016-2017 Outback vehicles. A replacement air bag control module may have been installed that is not compatible with the passenger air bag module, possibly affecting air bag deployment.
Consequence & remedy
Consequence: In the event of a crash necessitating passenger frontal air bag deployment, the air bag may not deploy properly, increasing the risk of injury.
Remedy: Subaru will notify owners, and dealers will replace the passenger air bag module, free of charge. The recall began February 3, 2020. Owners may contact Subaru customer service at 1-844-373-6614. Subaru's number for this recall is WUX-09.
Subaru of America, Inc. (Subaru) is recalling certain model year 2016-2017 Legacy and Outback vehicles manufactured February 29, 2016, to May 6, 2016. The steering column on the affected vehicles may have been improperly machined, and as a result, turning the steering wheel may have no effect on the direction of the wheels.
Consequence & remedy
Consequence: The loss of steering ability would increase the risk of a crash.
Remedy: Subaru will notify owners, and dealers will inspect the lot number on the steering column, replacing the steering column, as necessary, free of charge. The recall began May 13, 2016. Owners may contact Subaru customer service at 1-800-782-2783 or by visiting http://www.wtd65.service-campaign.com. Subaru's number for this recall is WTD-65. Note: Until the vehicles have been inspected, owners are advised not to drive their vehicles.
Subaru of America, Inc. (Subaru) is recalling certain model year 2016 Legacy vehicles manufactured October 24, 2015, to November 16, 2015, and Outback vehicles manufactured October 24, 2015, to November 17, 2015. Due to the improper tightening of the securing nuts, the drive shaft may separate from the rear differential.
Consequence & remedy
Consequence: If the drive shaft detaches from the rear differential, it may strike the fuel tank and result in a fuel leak, increasing the risk of a fire.
Remedy: Subaru has notified owners, and dealers will inspect the fastening nuts, and tighten or replace them, as necessary, free of charge. The recall began on December 10, 2015. Owners may contact Subaru customer service at 1-856-488-8500. Subaru's number for this recall is WQV-57.
Additional source detail variants (2)
Power Train:driveline:differential Unit
Subaru of America, Inc. (Subaru) is recalling certain model year 2016 Legacy vehicles manufactured October 24, 2015, to November 16, 2015, and Outback vehicles manufactured October 24, 2015, to November 17, 2015. Due to the improper tightening of the securing nuts, the drive shaft may separate from the rear differential.
Consequence: If the drive shaft detaches from the rear differential, it may strike the fuel tank and result in a fuel leak, increasing the risk of a fire.
Remedy: Subaru has notified owners, and dealers will inspect the fastening nuts, and tighten or replace them, as necessary, free of charge. The recall began on December 10, 2015. Owners may contact Subaru customer service at 1-856-488-8500. Subaru's number for this recall is WQV-57.
Power Train:driveline:driveshaft
Subaru of America, Inc. (Subaru) is recalling certain model year 2016 Legacy vehicles manufactured October 24, 2015, to November 16, 2015, and Outback vehicles manufactured October 24, 2015, to November 17, 2015. Due to the improper tightening of the securing nuts, the drive shaft may separate from the rear differential.
Consequence: If the drive shaft detaches from the rear differential, it may strike the fuel tank and result in a fuel leak, increasing the risk of a fire.
Remedy: Subaru has notified owners, and dealers will inspect the fastening nuts, and tighten or replace them, as necessary, free of charge. The recall began on December 10, 2015. Owners may contact Subaru customer service at 1-856-488-8500. Subaru's number for this recall is WQV-57.
Subaru of America, Inc. (Subaru) is recalling certain 2015 and 2016 model year Subaru Legacy 4-Door and Outback vehicles manufactured July 3, 2015, to July 27, 2015. Transmission oil may leak from a deformed seal cap on the propeller shaft yoke.
Consequence & remedy
Consequence: If the transmission oil leaks onto the exhaust pipe, there is a possible risk of fire.
Remedy: Subaru will notify owners, and dealers will replace the propeller shaft, free of charge. The recall began on August 28, 2015. Owners may contact 1-800-782-2783. Subaru's number for this recall is WQU-56.
Additional source detail variants (2)
Power Train:automatic Transmission
Subaru of America, Inc. (Subaru) is recalling certain 2015 and 2016 model year Subaru Legacy 4-Door and Outback vehicles manufactured July 3, 2015, to July 27, 2015. Transmission oil may leak from a deformed seal cap on the propeller shaft yoke.
Consequence: If the transmission oil leaks onto the exhaust pipe, there is a possible risk of fire.
Remedy: Subaru will notify owners, and dealers will replace the propeller shaft, free of charge. The recall began on August 28, 2015. Owners may contact 1-800-782-2783. Subaru's number for this recall is WQU-56.
Power Train:driveline:driveshaft
Subaru of America, Inc. (Subaru) is recalling certain 2015 and 2016 model year Subaru Legacy 4-Door and Outback vehicles manufactured July 3, 2015, to July 27, 2015. Transmission oil may leak from a deformed seal cap on the propeller shaft yoke.
Consequence: If the transmission oil leaks onto the exhaust pipe, there is a possible risk of fire.
Remedy: Subaru will notify owners, and dealers will replace the propeller shaft, free of charge. The recall began on August 28, 2015. Owners may contact 1-800-782-2783. Subaru's number for this recall is WQU-56.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1
EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Illustration