CHECK ENGINE LIGHT ON.. SHOP FOUND MULTIPLE ENGINE MISFIRES.. CHECKED ENGINE COMPRESSION.. COMPRESSION BELOW MANUFACTURERS SPECS.. NEEDED COMPLETE VALVE JOB PER SAAB RECOMMENDATION.. PARTS SENT TO MACHINE SHOP FOR REPAIRS AND RE-CONDITION.. RE-INSTALL OF CYLINDER HEAD ASSEMBLY WITH NEW HEAD GASKET AND ALL OTHER NEEDED GASKET AND…
Read full complaint
CHECK ENGINE LIGHT ON.. SHOP FOUND MULTIPLE ENGINE MISFIRES.. CHECKED ENGINE COMPRESSION.. COMPRESSION BELOW MANUFACTURERS SPECS.. NEEDED COMPLETE VALVE JOB PER SAAB RECOMMENDATION.. PARTS SENT TO MACHINE SHOP FOR REPAIRS AND RE-CONDITION.. RE-INSTALL OF CYLINDER HEAD ASSEMBLY WITH NEW HEAD GASKET AND ALL OTHER NEEDED GASKET AND SEALS.. FLUSHED AND REFILLED ALL ENGINE TRANSMISSION FLUIDS.. COMPLETE VALVE JOB WITH INTAKE AND EXHAUST VALVES.. DEFECTIVE VALVE IS REPORTED ISSUE ON SAAB 9-3 2008.. *TR
NHTSA ODI #10683665
103,000 miles · Feb 14, 2015
EnginePower Train
WE PURCHASED A 2008 SAAB 9-3 IN 3/2011 WITH 34,000 MILES. AS OF 2/2015 THE VEHICLE HAS 104,000 MILES. LAST MONTH THE VEHICLE BARELY STARTED AFTER SITTING OVERNIGHT AND WOULD TAKE SEVERAL MINUTES TO REACH A NORMAL IDLE. IT WOULD THEN START THE REST OF THE DAY, SOMETIMES AFTER A "HARD" START. THE CHECK ENGINE LIGHT CAME ON AND…
Read full complaint
WE PURCHASED A 2008 SAAB 9-3 IN 3/2011 WITH 34,000 MILES. AS OF 2/2015 THE VEHICLE HAS 104,000 MILES. LAST MONTH THE VEHICLE BARELY STARTED AFTER SITTING OVERNIGHT AND WOULD TAKE SEVERAL MINUTES TO REACH A NORMAL IDLE. IT WOULD THEN START THE REST OF THE DAY, SOMETIMES AFTER A "HARD" START. THE CHECK ENGINE LIGHT CAME ON AND THE MECHANIC SAID THE CODE READ AS A "CYLINDER MISFIRE" CODE. 8 DAYS AGO THE CAR WOULD NOT START AND IS NOW SITTING IN MY DRIVEWAY. I CALLED A SAAB SPECIALIST ABOUT 2 HOURS AWAY FROM ME WHO KNEW EXACTLY WHAT THE PROBLEM WAS. HE EXPLAINED THE INTAKE VALVE PROBLEM THAT A LOT OF SAAB OWNERS ARE EXPERIENCING DUE TO DEFECTIVE MATERIALS USED BY GM AND/OR SUPPLIERS. HE SAID THE COST WILL BE AT LEAST $2,200 BUT COULD EASILY BE MORE DEPENDING ON THE SEVERITY. THIS IS A KNOWN DEFECT (A SERVICE BULLETIN HAS BEEN ISSUED DETAILING THIS ISSUE) THAT SHOULD BE SUBJECT TO A RECALL. WE CANNOT AFFORD TO FIX AN ENGINE THAT DOES NOT WORK DUE TO SUBSTANDARD VALVES. THIS IS NOT A NORMAL "WEAR AND TEAR" ISSUE, BUT AN ISSUE DEALING WITH PARTS THAT WERE DOOMED FROM THE BEGINNING. *TR
NHTSA ODI #10683486
80,300 miles · Dec 30, 2014
Engine
COMPRESSION IN CYLINDER ONE IS NOT FIRING AT A FULL PSI PER MFG STANDARDS. IT'S CAUSING A COLD START ISSUE AND THE CAR BARELY TURNS OVER TO START WHEN IT'S NOT WARMED UP. *JS
NHTSA ODI #10669001
90,000 miles · Dec 23, 2014
Engine
VEHICLE DOESN'T START DUE TO LOW COMPRESSION ON COLD DAYS. CAR WILL LEAVE YOU STRANDED IN EXTREME TEMPS. *TR
NHTSA ODI #10668059
128,000 miles · Dec 3, 2014
Engine
SAME AS PROBLEM BELOW: SINCE I NEED THE CAR BADLY, I'VE INSTRUCTED MY MECHANIC TO START WORKING ON THE FIX. OVER TIME THE VALVES IN THE 2.0T ENGINE WILL WEAR CAUSING DRAMATIC LOSS IN COMPRESSION. PROBLEM STARTS WITH ROUGH IDLING AND TROUBLE TURNING OVER AT COLD START BUT ESCALATES TO A POINT WHERE THE CAR WILL NOT START WHAT…
Read full complaint
SAME AS PROBLEM BELOW: SINCE I NEED THE CAR BADLY, I'VE INSTRUCTED MY MECHANIC TO START WORKING ON THE FIX. OVER TIME THE VALVES IN THE 2.0T ENGINE WILL WEAR CAUSING DRAMATIC LOSS IN COMPRESSION. PROBLEM STARTS WITH ROUGH IDLING AND TROUBLE TURNING OVER AT COLD START BUT ESCALATES TO A POINT WHERE THE CAR WILL NOT START WHAT SO EVER. IT APPEARS THAT WHEN MANUFACTURING THE ENGINE GM PUT VALVES MADE OF A SOFTER THAN USUAL METAL. THESE VALVES GET ESSENTIALLY HAMMERED AGAINST THE CYLINDER HEAD TO A POINT WHERE THE EDGES BECOME SO THIN THEY ARE RAZOR SHARP. A SERVICE BULLETIN WAS SENT OUT TO DEALERS FROM SPNA (SAAB PARTS NORTH AMERICA), WHICH MEANS THAT GM IS WELL AWARE OF THIS ISSUE. A SAAB MECHANIC WARNED ME THAT THE PROBLEM COULD GET WORSE AT ANY TIME REGARDLESS OF MILEAGE AND THAT SOONER OF LATER MY CAR WOULD NOT START. TO FIX THIS ISSUE ALL 16 VALVES WOULD NEED TO BE REPLACED. THIS INVOLVES SERIOUS TIME AND EFFORT AND I WAS QUOTED A PRICE OF UP TO $3,000 FOR A REPAIR. PLEASE BE ADVISED THAT THIS PROBLEM EFFECTS EVERY SAAB 9-3 WITH THE 2.0T FROM 2007 TO 2011. GM SHOULD BE HELD ACCOUNTABLE FOR THESE FAULTY PARTS AND ISSUE A RECALL. *JS
NHTSA ODI #10661960
96,000 miles · Nov 21, 2014
Engine
FOR THE SECOND YEAR IN A ROW, WITH TEMPERATURE IN THE TEENS, THE CAR WILL NOT START DUE TO BAD INTAKE VALVES. AS NOTED BY MANY CONSUMERS ON SEVERAL SAAB FORUMS, THIS ENGINE LOSES SIGNIFICANT COMPRESSION IN THE CYLINDERS CAUSING DIFFICULT STARTING, A VERY ROUGH IDLE AND ULTIMATELY RESULTING IN A VALVE JOB. *TR
NHTSA ODI #10660005
60,000 miles · Oct 30, 2014
Engine
ENGINE REFUSED TO START IN COLD WEATHER. SAAB TECHNICIAN CONFIRMED AN ISSUE WITH INTAKE VALVES BEING DEFECTIVE. THE INTAKE VALVES WOULD NOT SEAL CAUSE COMPRESSION TO GET AS LOW AS 40 PSI CAUSING NO START CONDITION. SAAB REFUSED TO COVER IT UNDER WARRANTY ON THE 61ST MONTH OF OWNERSHIP VEHICLE CAME WITH 60 MONTH ENGINE WARRANTY…
Read full complaint
ENGINE REFUSED TO START IN COLD WEATHER. SAAB TECHNICIAN CONFIRMED AN ISSUE WITH INTAKE VALVES BEING DEFECTIVE. THE INTAKE VALVES WOULD NOT SEAL CAUSE COMPRESSION TO GET AS LOW AS 40 PSI CAUSING NO START CONDITION. SAAB REFUSED TO COVER IT UNDER WARRANTY ON THE 61ST MONTH OF OWNERSHIP VEHICLE CAME WITH 60 MONTH ENGINE WARRANTY AND THE COST OF REPAIR OUT OF POCKET WAS OVER $2500. THERE WERE DAYS THE CAR WOULDN'T START AWAY FROM HOME AFTER SITTING JUST ONE DAY, LEAVING ME STRANDED IN EXTREME COLD WEATHER WITH NO HEAT. GM AND SAAB KNOW ABOUT THIS ISSUE AS THEY GOT POOR QUALITY INTAKE VALVES FROM A SUPPLIER. GM HAS NOT YET CAMPAIGNED/RECALLED THESE VEHICLE, AS YOU KNOW GM CULTURE LACKS ETHICS AND HAVE COVERED UP DEATHS IN THE PAST TO SAVE MONEY. AS A GOVERNMENT AGENCY YOUR RESPONSIBILITY IS TO PROTECT CONSUMERS AND BE PROACTIVE AND NOT ACT AFTER SOMETHING HORRIBLE HAS HAPPENED. THERE ARE MORE THEN ENOUGH COMPLAINTS ON THIS WEBSITE FOR THIS ISSUE. ARE YOU WAITING FOR A DEATH TO OCCUR BEFORE ANYTHING IS DONE ? GM NEW OR OLD SHOULD BE HELD ACCOUNTABLE FOR THIS ISSUE. ITS A GM ECOTEC ENGINE, CAR WAS PRODUCED ON A GM PLATFORM. PROFITS FROM THE VEHICLE ALSO WENT TO GM. THIS ISSUE ALSO CAUSES AN INCREASE IN EMISSIONS. AS THERE IS LOSS OF COMPRESSION, CYLINDER MISFIRE OR HAS INCOMPLETE COMBUSTION CAUSING AN INCREASE IN HYDROCARBONS AND CARBON MONOXIDE IN THE TAIL PIPE. *TR
NHTSA ODI #10651318
90,000 miles · Jul 26, 2014
Engine
WHILE DRIVING VEHICLE P0008 ENGINE CODE OCCURRED, CAR WAS TAKEN TO AN INDEPENDENT MECHANIC, MECHANIC STATED ENGINE CODE WAS INDICATED BY CAMSHAFT SENSOR, AND COULD POSSIBLY BE A WORN TIMING CHAIN. THIS IS A COMMON ISSUE ON GM 2.8 AND 3.6 ENGINES AND GM HAS ISSUED A TSB TO EXTEND THE WARRANTY FOR THE TIMING CHAIN TO 120K MILES OR…
Read full complaint
WHILE DRIVING VEHICLE P0008 ENGINE CODE OCCURRED, CAR WAS TAKEN TO AN INDEPENDENT MECHANIC, MECHANIC STATED ENGINE CODE WAS INDICATED BY CAMSHAFT SENSOR, AND COULD POSSIBLY BE A WORN TIMING CHAIN. THIS IS A COMMON ISSUE ON GM 2.8 AND 3.6 ENGINES AND GM HAS ISSUED A TSB TO EXTEND THE WARRANTY FOR THE TIMING CHAIN TO 120K MILES OR TEN YEARS. THIS TSB DID NOT INCLUDE THE TIMING CHAIN FOR THE 2.8 LITER ENGINE IN THE SAAB. *TR
NHTSA ODI #10616588
78,000 miles · Jun 22, 2014
Engine
ENGINE FAILS TO START WHEN COLD AND WHEN IT DOES, THE CAR RUNS EXTREMELY ROUGH. CAR HESITATES AND DRIVES POORLY UNTIL ENGINE IS FINALLY WARM. COLD COMPRESSION TEST CONFIRMS THAT THERE IS LOW COMPRESSION AND THAT THERE ARE DEFECTIVE INTAKE VALVES. THIS IS A SERIOUS PROBLEM FOR A VEHICLE THAT IS NOT OLD AT ALL. *TR
NHTSA ODI #10605050
42,000 miles · Jun 17, 2014
Engine
COLD START PROBLEM CAUSED BY LOW COMPRESSION / DEFECTIVE VALVES WHEN COLD. RUNS FINE AFTER IT WARMS UP. GETTING WORSE OVER TIME. *TR
General Motors LLC (GM) is recalling certain model year 2006-2011 Saab 9-3 vehicles manufactured May 31, 2002, to February 15, 2011, 2006-2009 Saab 9-5 vehicles manufactured June 7, 2005, to May 28, 2009, and 2008-2009 Saturn Astra vehicles manufactured April 11, 2007, to July 24, 2008. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.
Consequence & remedy
Consequence: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy: GM will notify owners, and dealers will replace the driver's frontal air bag inflator on Saab 9-3 and 9-5 vehicles and will replace the driver's frontal airbag module on Saturn Astra vehicles, free of charge. The recall began on March 1, 2017. Owners may contact Saab customer service at 1-800-955-9007 or Saturn customer service at 1-800-553-6000. GM's number for this recall is 28810.
General Motors LLC (GM) is recalling certain model year 2004-2011 Saab 9-3 Convertible vehicles manufactured July 30, 2003, to February 15, 2011. In the affected vehicles, the driver's side front seat belt retractor may break, causing the seat belt webbing not to retract.
Consequence & remedy
Consequence: In the event of a crash, a seat belt that has not retracted may not properly restrain the seat occupant, increasing their risk of injury.
Remedy: GM will notify owners, and dealers will replace the driver's seat belt retractor, free of charge. The recall began on October 6, 2015. Owners may contact Saab customer service at 1-800-955-9007. GM's number for this recall is 14222. Note: Special Coverage 10086 will replace the passenger side seat belt retractor if it fails, free of charge, for the life of the vehicle.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2
EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
PE08005 · Reduced Brake POWER-ASSIST
Opened Jan 28, 2008 · Closed Jun 3, 2008
Status: closed (inferred from source dates) · Service Brakes, Hydraulic:power Assist:vacuum; Service Brakes, Hydraulic:power Assist:vacuum:hoses, Lines/piping, And Fittings
SAAB AUTOMOBILE AB, A SUBSIDIARY OF GENERAL MOTORS CORP. (GM), MANUFACTURED 12,317 SUBJECT VEHICLES THROUGH FEBRUARY 15, 2008, EQUIPPED WITH THE HIGH FEATURE V6 TURBOCHARGED ENGINE IDENTIFIED BY REGULAR PRODUCTION OPTION LP9.A TANDEM VACUUM BRAKE BOOSTER ASSEMBLY PROVIDES BRAKE POWER-ASSIST.THE ENGINE IS THE PRIMARY VACUUM SOURCE TO THE BOOSTER AND ITS EFFECT IS AMPLIFIED BY A VENTURI.UNDER CERTAIN CONDITIONS, SUCH AS A COLD ENGINE START OR AT HIGH ALTITUDES, AN ELECTRIC VACUUM PUMP (EVP) SUPPLEMENTS ENGINE VACUUM.A PRESSURE SWITCH MEASURES BRAKE BOOSTER VACUUM AND COMMANDS THE EVP WHEN TO TURN ON/OFF.CHECK VALVES ARE LOCATED AT THE INTAKE MANIFOLD, VENTURI, AND PRESSURE SWITCH. GM IDENTIFIED TWO ISSUES THAT AFFECT EVP PERFORMANCE: CORROSION OF ELECTRICAL COMPONENTS INSIDE THE PUMP CAUSED BY MOISTURE INGRESS THROUGH THE AIR OUTLET WHEN THE EVP SHUTS OFF AND THE VACUUM IN A SECTION OF PIPING BETWEEN THE EVP AND THE PRESSURE SWITCH IS RELEASED TO THE ATMOSPHERE; AND SILICONE CONTAMINATION OF THE ELECTRICAL CONTACTS INSIDE THE PRESSURE SWITCH RESULTING IN A NOISY OR IMPEDED ELECTRICAL SIGNAL.GM ADDRESSED EVP PERFORMANCE WITH TWO DESIGN CHANGES.IN NOVEMBER 2007, GM MODIFIED THE RUBBER PROTECTIVE CAP THAT COVERS THE EVP AIR OUTLET TO IMPROVE SEALING AND IN FEBRUARY 2008, GM ADDED A CHECK VALVE TO THE SECTION OF PIPING BETWEEN THE EVP AND THE PRESSURE SWITCH AS CLOSE AS POSSIBLE TO THE EVP IN AN EFFORT TO REDUCE THE BACK FLOW OF MOISTURE THROUGH THE PUMP. IN TOTAL, THE OFFICE OF DEFECTS INVESTIGATION (ODI) IS AWARE OF 240 SUBJECT VEHICLES AFFECTED BY THE ALLEGED DEFECT.COMPLAINANTS REPORT THAT SYMPTOMS OCCUR IMMEDIATELY AFTER A COLD ENGINE START AND ONLY FOR A SHORT DURATION (30 TO 60 SECONDS), DURING WHICH PERIOD THE AMOUNT OF BRAKE POWER-ASSIST PROVIDED TO THE OPERATOR MAY BE REDUCED DUE TO AN INOPERATIVE EVP.THE SYMPTOMS MAY BE MORE PRONOUNCED THE LONGER THE VEHICLE HAS BEEN PARKED AS THERE IS A NATURAL TENDENCY FOR THE BRAKE BOOSTER TO SLOWLY RELEASE THE VACUUM OVER TIME IF IT IS NOT REPLENISHED.FULL BRAKE POWER-ASSIST CAPABILITY RESUMES AFTER THIS BRIEF COLD START PERIOD OR IMMEDIATELY AFTER A WARM ENGINE START.THE THREE REPORTED CRASHES ALL OCCURRED AT LOW SPEEDS (< 5MPH) WHILE REVERSING FROM A GARAGE OR PARKING SPACE AND RESULTED IN MINIMAL TO MINOR PROPERTY DAMAGE. THE SUBJECT ISSUE DIFFERS FROM A PREVIOUS SAFETY RECALL (05V-236) AFFECTING CERTAIN MODEL YEAR (MY) 2003-2005 SAAB 9-3 VEHICLES EQUIPPED WITH A DEFECTIVE CHECK VALVE THAT COULD BECOME BRITTLE AND FRACTURE, RESULTING IN A LASTING AND TOTAL LOSS OF BRAKE POWER-ASSIST AT ANY TIME.THE DEFECTIVE CHECK VALVE DID NOT MEET LIFETIME DURABILITY REQUIREMENTS AND GM PREDICTED A 100% FAILURE RATE AT LESS THAN 4 YEARS OF SERVICE.IN COMPARISON, GM PREDICTS AN EVP FAILURE RATE OF APPROXIMATELY 6.4% AT 3 YEARS IN SERVICE FOR THE SUBJECT VEHICLES RESULTING IN REDUCED BRAKE POWER-ASSIST FOR A SHORT DURATION.THE SUBJECT ISSUE ALSO DIFFERS FROM A PREVIOUS ODI INFLUENCED SAFETY RECALL (03V-474) TO ADDRESS EVP MOISTURE INGRESS IN CERTAIN MY 2000 VOLVO S40 AND V40 VEHICLES.THE RECALLED VOLVO VEHICLES UTILIZED A STEEL VACUUM PIPE BETWEEN THE EVP AND THE BRAKE BOOSTER.MOISTURE INGRESS AND SUBSEQUENT CORROSION COULD COMPROMISE THE VACUUM PIPE RESULTING IN A LASTING AND TOTAL LOSS OF BRAKE POWER-ASSIST.MOISTURE DOES NOT APPEAR TO HAVE A SIGNIFICANT IMPACT ON THE POLYETHER-ESTER PLASTIC VACUUM PIPE USED IN THE SUBJECT VEHICLES. A SAFETY-RELATED DEFECT HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.ACCORDINGLY, THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION
Additional source detail variants (2)
Service Brakes, Hydraulic:power Assist:vacuum
SAAB AUTOMOBILE AB, A SUBSIDIARY OF GENERAL MOTORS CORP. (GM), MANUFACTURED 12,317 SUBJECT VEHICLES THROUGH FEBRUARY 15, 2008, EQUIPPED WITH THE HIGH FEATURE V6 TURBOCHARGED ENGINE IDENTIFIED BY REGULAR PRODUCTION OPTION LP9.A TANDEM VACUUM BRAKE BOOSTER ASSEMBLY PROVIDES BRAKE POWER-ASSIST.THE ENGINE IS THE PRIMARY VACUUM SOURCE TO THE BOOSTER AND ITS EFFECT IS AMPLIFIED BY A VENTURI.UNDER CERTAIN CONDITIONS, SUCH AS A COLD ENGINE START OR AT HIGH ALTITUDES, AN ELECTRIC VACUUM PUMP (EVP) SUPPLEMENTS ENGINE VACUUM.A PRESSURE SWITCH MEASURES BRAKE BOOSTER VACUUM AND COMMANDS THE EVP WHEN TO TURN ON/OFF.CHECK VALVES ARE LOCATED AT THE INTAKE MANIFOLD, VENTURI, AND PRESSURE SWITCH. GM IDENTIFIED TWO ISSUES THAT AFFECT EVP PERFORMANCE: CORROSION OF ELECTRICAL COMPONENTS INSIDE THE PUMP CAUSED BY MOISTURE INGRESS THROUGH THE AIR OUTLET WHEN THE EVP SHUTS OFF AND THE VACUUM IN A SECTION OF PIPING BETWEEN THE EVP AND THE PRESSURE SWITCH IS RELEASED TO THE ATMOSPHERE; AND SILICONE CONTAMINATION OF THE ELECTRICAL CONTACTS INSIDE THE PRESSURE SWITCH RESULTING IN A NOISY OR IMPEDED ELECTRICAL SIGNAL.GM ADDRESSED EVP PERFORMANCE WITH TWO DESIGN CHANGES.IN NOVEMBER 2007, GM MODIFIED THE RUBBER PROTECTIVE CAP THAT COVERS THE EVP AIR OUTLET TO IMPROVE SEALING AND IN FEBRUARY 2008, GM ADDED A CHECK VALVE TO THE SECTION OF PIPING BETWEEN THE EVP AND THE PRESSURE SWITCH AS CLOSE AS POSSIBLE TO THE EVP IN AN EFFORT TO REDUCE THE BACK FLOW OF MOISTURE THROUGH THE PUMP. IN TOTAL, THE OFFICE OF DEFECTS INVESTIGATION (ODI) IS AWARE OF 240 SUBJECT VEHICLES AFFECTED BY THE ALLEGED DEFECT.COMPLAINANTS REPORT THAT SYMPTOMS OCCUR IMMEDIATELY AFTER A COLD ENGINE START AND ONLY FOR A SHORT DURATION (30 TO 60 SECONDS), DURING WHICH PERIOD THE AMOUNT OF BRAKE POWER-ASSIST PROVIDED TO THE OPERATOR MAY BE REDUCED DUE TO AN INOPERATIVE EVP.THE SYMPTOMS MAY BE MORE PRONOUNCED THE LONGER THE VEHICLE HAS BEEN PARKED AS THERE IS A NATURAL TENDENCY FOR THE BRAKE BOOSTER TO SLOWLY RELEASE THE VACUUM OVER TIME IF IT IS NOT REPLENISHED.FULL BRAKE POWER-ASSIST CAPABILITY RESUMES AFTER THIS BRIEF COLD START PERIOD OR IMMEDIATELY AFTER A WARM ENGINE START.THE THREE REPORTED CRASHES ALL OCCURRED AT LOW SPEEDS (< 5MPH) WHILE REVERSING FROM A GARAGE OR PARKING SPACE AND RESULTED IN MINIMAL TO MINOR PROPERTY DAMAGE. THE SUBJECT ISSUE DIFFERS FROM A PREVIOUS SAFETY RECALL (05V-236) AFFECTING CERTAIN MODEL YEAR (MY) 2003-2005 SAAB 9-3 VEHICLES EQUIPPED WITH A DEFECTIVE CHECK VALVE THAT COULD BECOME BRITTLE AND FRACTURE, RESULTING IN A LASTING AND TOTAL LOSS OF BRAKE POWER-ASSIST AT ANY TIME.THE DEFECTIVE CHECK VALVE DID NOT MEET LIFETIME DURABILITY REQUIREMENTS AND GM PREDICTED A 100% FAILURE RATE AT LESS THAN 4 YEARS OF SERVICE.IN COMPARISON, GM PREDICTS AN EVP FAILURE RATE OF APPROXIMATELY 6.4% AT 3 YEARS IN SERVICE FOR THE SUBJECT VEHICLES RESULTING IN REDUCED BRAKE POWER-ASSIST FOR A SHORT DURATION.THE SUBJECT ISSUE ALSO DIFFERS FROM A PREVIOUS ODI INFLUENCED SAFETY RECALL (03V-474) TO ADDRESS EVP MOISTURE INGRESS IN CERTAIN MY 2000 VOLVO S40 AND V40 VEHICLES.THE RECALLED VOLVO VEHICLES UTILIZED A STEEL VACUUM PIPE BETWEEN THE EVP AND THE BRAKE BOOSTER.MOISTURE INGRESS AND SUBSEQUENT CORROSION COULD COMPROMISE THE VACUUM PIPE RESULTING IN A LASTING AND TOTAL LOSS OF BRAKE POWER-ASSIST.MOISTURE DOES NOT APPEAR TO HAVE A SIGNIFICANT IMPACT ON THE POLYETHER-ESTER PLASTIC VACUUM PIPE USED IN THE SUBJECT VEHICLES. A SAFETY-RELATED DEFECT HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.ACCORDINGLY, THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION
Service Brakes, Hydraulic:power Assist:vacuum:hoses, Lines/piping, And Fittings
SAAB AUTOMOBILE AB, A SUBSIDIARY OF GENERAL MOTORS CORP. (GM), MANUFACTURED 12,317 SUBJECT VEHICLES THROUGH FEBRUARY 15, 2008, EQUIPPED WITH THE HIGH FEATURE V6 TURBOCHARGED ENGINE IDENTIFIED BY REGULAR PRODUCTION OPTION LP9.A TANDEM VACUUM BRAKE BOOSTER ASSEMBLY PROVIDES BRAKE POWER-ASSIST.THE ENGINE IS THE PRIMARY VACUUM SOURCE TO THE BOOSTER AND ITS EFFECT IS AMPLIFIED BY A VENTURI.UNDER CERTAIN CONDITIONS, SUCH AS A COLD ENGINE START OR AT HIGH ALTITUDES, AN ELECTRIC VACUUM PUMP (EVP) SUPPLEMENTS ENGINE VACUUM.A PRESSURE SWITCH MEASURES BRAKE BOOSTER VACUUM AND COMMANDS THE EVP WHEN TO TURN ON/OFF.CHECK VALVES ARE LOCATED AT THE INTAKE MANIFOLD, VENTURI, AND PRESSURE SWITCH. GM IDENTIFIED TWO ISSUES THAT AFFECT EVP PERFORMANCE: CORROSION OF ELECTRICAL COMPONENTS INSIDE THE PUMP CAUSED BY MOISTURE INGRESS THROUGH THE AIR OUTLET WHEN THE EVP SHUTS OFF AND THE VACUUM IN A SECTION OF PIPING BETWEEN THE EVP AND THE PRESSURE SWITCH IS RELEASED TO THE ATMOSPHERE; AND SILICONE CONTAMINATION OF THE ELECTRICAL CONTACTS INSIDE THE PRESSURE SWITCH RESULTING IN A NOISY OR IMPEDED ELECTRICAL SIGNAL.GM ADDRESSED EVP PERFORMANCE WITH TWO DESIGN CHANGES.IN NOVEMBER 2007, GM MODIFIED THE RUBBER PROTECTIVE CAP THAT COVERS THE EVP AIR OUTLET TO IMPROVE SEALING AND IN FEBRUARY 2008, GM ADDED A CHECK VALVE TO THE SECTION OF PIPING BETWEEN THE EVP AND THE PRESSURE SWITCH AS CLOSE AS POSSIBLE TO THE EVP IN AN EFFORT TO REDUCE THE BACK FLOW OF MOISTURE THROUGH THE PUMP. IN TOTAL, THE OFFICE OF DEFECTS INVESTIGATION (ODI) IS AWARE OF 240 SUBJECT VEHICLES AFFECTED BY THE ALLEGED DEFECT.COMPLAINANTS REPORT THAT SYMPTOMS OCCUR IMMEDIATELY AFTER A COLD ENGINE START AND ONLY FOR A SHORT DURATION (30 TO 60 SECONDS), DURING WHICH PERIOD THE AMOUNT OF BRAKE POWER-ASSIST PROVIDED TO THE OPERATOR MAY BE REDUCED DUE TO AN INOPERATIVE EVP.THE SYMPTOMS MAY BE MORE PRONOUNCED THE LONGER THE VEHICLE HAS BEEN PARKED AS THERE IS A NATURAL TENDENCY FOR THE BRAKE BOOSTER TO SLOWLY RELEASE THE VACUUM OVER TIME IF IT IS NOT REPLENISHED.FULL BRAKE POWER-ASSIST CAPABILITY RESUMES AFTER THIS BRIEF COLD START PERIOD OR IMMEDIATELY AFTER A WARM ENGINE START.THE THREE REPORTED CRASHES ALL OCCURRED AT LOW SPEEDS (< 5MPH) WHILE REVERSING FROM A GARAGE OR PARKING SPACE AND RESULTED IN MINIMAL TO MINOR PROPERTY DAMAGE. THE SUBJECT ISSUE DIFFERS FROM A PREVIOUS SAFETY RECALL (05V-236) AFFECTING CERTAIN MODEL YEAR (MY) 2003-2005 SAAB 9-3 VEHICLES EQUIPPED WITH A DEFECTIVE CHECK VALVE THAT COULD BECOME BRITTLE AND FRACTURE, RESULTING IN A LASTING AND TOTAL LOSS OF BRAKE POWER-ASSIST AT ANY TIME.THE DEFECTIVE CHECK VALVE DID NOT MEET LIFETIME DURABILITY REQUIREMENTS AND GM PREDICTED A 100% FAILURE RATE AT LESS THAN 4 YEARS OF SERVICE.IN COMPARISON, GM PREDICTS AN EVP FAILURE RATE OF APPROXIMATELY 6.4% AT 3 YEARS IN SERVICE FOR THE SUBJECT VEHICLES RESULTING IN REDUCED BRAKE POWER-ASSIST FOR A SHORT DURATION.THE SUBJECT ISSUE ALSO DIFFERS FROM A PREVIOUS ODI INFLUENCED SAFETY RECALL (03V-474) TO ADDRESS EVP MOISTURE INGRESS IN CERTAIN MY 2000 VOLVO S40 AND V40 VEHICLES.THE RECALLED VOLVO VEHICLES UTILIZED A STEEL VACUUM PIPE BETWEEN THE EVP AND THE BRAKE BOOSTER.MOISTURE INGRESS AND SUBSEQUENT CORROSION COULD COMPROMISE THE VACUUM PIPE RESULTING IN A LASTING AND TOTAL LOSS OF BRAKE POWER-ASSIST.MOISTURE DOES NOT APPEAR TO HAVE A SIGNIFICANT IMPACT ON THE POLYETHER-ESTER PLASTIC VACUUM PIPE USED IN THE SUBJECT VEHICLES. A SAFETY-RELATED DEFECT HAS NOT BEEN IDENTIFIED AT THIS TIME AND FURTHER USE OF AGENCY RESOURCES DOES NOT APPEAR TO BE WARRANTED.ACCORDINGLY, THIS INVESTIGATION IS CLOSED.THE CLOSING OF THIS INVESTIGATION
2008 Saab 9-3 Problems, Complaints & Recalls | Skip That Year
Illustration