When problems were reported
Mileage at the reported incident
Limited mileage data: 0 of 0 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
NHTSA owner reports · September 18, 2026 snapshot.
Official recalls
8Jul 21, 2025
Rosenbauer America (Rosenbauer) is recalling certain 2019-2022 Avenger, 2019-2024 Commander, and Warrior fire trucks equipped with an Innovative Controls instrument panel. A software error may cause the odometer to freeze and not display accurate mileage.
Consequence & remedy
Consequence: An inaccurate odometer reading can unintentionally delay critical safety-related maintenance, potentially impairing the safe operation of the vehicle and increasing the risk of a crash.
Remedy: Dealers will replace the instrument panel, free of charge. Owner notification letters were mailed September 10, 2025. Owners may contact Rosenbauer customer service at 1-651-462-1000.
Dec 22, 2023
Rosenbauer America is recalling certain 2020-2022 Avenger, 2017-2024 Commander, 2020-2024 Warrior, 2023 Commercial F-350, F-550, 108SD, and 2024 Commercial 114SD vehicles. In the event of a short circuit or wiring failure, the firmware may fail to shut off the output pin, resulting in overloaded electrical circuits.
Consequence & remedy
Consequence: Overloaded electrical circuits can overheat, increasing the risk of fire.
Remedy: Dealers will update the firmware, free of charge. Owner notification letters were mailed February 22, 2024. Owners may contact Rosenbauer America customer service at 1-651-462-1000.
Jul 31, 2023
Rosenbauer America (Rosenbauer) is recalling certain 2020-2022 Commercial F-550, 2022 Commercial M2-106, M2-112, Commercial 567, 2021 Commander, and Avenger vehicles equipped with certain Warn Industries VR EVO winches with a wireless handheld remote. Water may enter the handheld remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally.
Consequence & remedy
Consequence: A winch that operates unintentionally increases the risk of injury.
Remedy: Rosenbauer will notify owners and provide instructions for inspecting the remote for corrosion, disabling the wireless function, and ordering a new wired remote if necessary, free of charge. Owner notification letters were mailed September 25, 2023. Owners may contact Rosenbauer customer service at 1-651-462-1000.
Additional source detail variants (2)
Equipment:mechanical:winch
Rosenbauer America (Rosenbauer) is recalling certain 2020-2022 Commercial F-550, 2022 Commercial M2-106, M2-112, Commercial 567, 2021 Commander, and Avenger vehicles equipped with certain Warn Industries VR EVO winches with a wireless handheld remote. Water may enter the handheld remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally.
Consequence: A winch that operates unintentionally increases the risk of injury.
Remedy: Rosenbauer will notify owners and provide instructions for inspecting the remote for corrosion, disabling the wireless function, and ordering a new wired remote if necessary, free of charge. Owner notification letters were mailed September 25, 2023. Owners may contact Rosenbauer customer service at 1-651-462-1000.
Electrical System
Rosenbauer America (Rosenbauer) is recalling certain 2020-2022 Commercial F-550, 2022 Commercial M2-106, M2-112, Commercial 567, 2021 Commander, and Avenger vehicles equipped with certain Warn Industries VR EVO winches with a wireless handheld remote. Water may enter the handheld remote control for the winch and cause circuit board corrosion, which can allow the winch to operate unintentionally.
Consequence: A winch that operates unintentionally increases the risk of injury.
Remedy: Rosenbauer will notify owners and provide instructions for inspecting the remote for corrosion, disabling the wireless function, and ordering a new wired remote if necessary, free of charge. Owner notification letters were mailed September 25, 2023. Owners may contact Rosenbauer customer service at 1-651-462-1000.
Jan 21, 2022
Rosenbauer America (Rosenbauer) is recalling certain 2021 Commander and Warrior vehicles equipped with Meritor 180 series drive pinions. The rear axle drive pinion may fracture.
Consequence & remedy
Consequence: A fractured drive pinion may contact the brake drop hose, and unintentionally engage the parking brake without detection, or without the brake lights activating, increasing the risk of a crash.
Remedy: Meritor will inspect and replace the drive pinion, as necessary, free of charge. Owner notification letters were mailed on April 27, 2022. Owners may contact Rosenbauer customer service at 1-651-462-1000.
Jan 1, 2022
Rosenbauer America (Rosenbauer) is recalling certain 2018-2021 Commander, 2018-2020 Warrior, and 2020-2022 Commercial 114SD vehicles. The fuel tubes between the fuel rail and the injector for cylinders 4, 5, and 6 may be susceptible to cracking, resulting in a high-pressure fuel leak.
Consequence & remedy
Consequence: A high-pressure fuel leak in the presence of an ignition source can increase the risk of a fire.
Remedy: Cummins dealers will install vibration isolators, and replace the fuel tubes as necessary, free of charge. Owner notification letters were mailed on March 8, 2022. Owners may contact Cummins customer service at 1-800-286-6467.
Sep 28, 2021
Rosenbauer America (Rosenbauer) is recalling certain 2022 Commercial HV 507, 2020-2021 Commander, and 2021 Panther ARFF vehicles equipped with Cummins generator sets. The lifting cables may be improperly crimped.
Consequence & remedy
Consequence: An improperly crimped cable may come out of place during a lifting operation, possibly causing the generator set to fall, increasing the risk of injury.
Remedy: Cummins will inspect the lifting cable, and either replace the cable or install a warning label, free of charge. Vehicles were repaired in October 2021. Owners may contact Rosenbauer's customer service at 1-651-462-1000 or Cummins' customer service at 1-800-286-6467.
May 11, 2021
Rosenbauer America (Rosenbauer) is recalling certain 2016-2021 Commander, Warrior, Avenger, and 2019 Commercial M2 106 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Consequence & remedy
Consequence: A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy: Dealers will inspect and replace the rail as necessary, free of charge. Interim owner notification letters were mailed on July 9, 2021. Owners may contact Rosenbauer customer service at 1-651-462-1000.
Dec 15, 2020
Rosenbauer America (Rosenbauer) is recalling certain 2018-2021 Commander, 2020 Warrior, 2020-2021 Commercial, and 2020 Avenger vehicles equipped with Weldon V-Mux Vista IV Standard LCD displays used for controlling emergency vehicle lighting and HVAC functions. These displays may experience low voltage spikes and cause the LCD display to lock up or become nonfunctional, due to varying electrical installations.
Consequence & remedy
Consequence: If the LCD display becomes locked up or non-functional it can delay emergency efforts, which can increase the risk of injury.
Remedy: Rosenbauer will notify owners, and dealers will repair or replace the IV Standard LCD displays, free of charge. The recall March 3, 2021. Owners may contact Rosenbauer customer service at 1-651-462-1000. Rosenbauer's number for this recall is 20E-078.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Illustration