Electrical System. Review the 37 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Exterior Lighting. Review the 14 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
Engine. Review the 8 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

0 crash reports2 fire reports1 injury reports

Fuel/propulsion System complaints

2 reports

Clear category filter

Mileage unknown · Feb 4, 2026

EngineFuel/propulsion SystemPower Train

Read full complaint

Check engine light consistently comes on with codes p0263, p0272, p0266 for contribution balance codes for cylinders 1, 2, 4 & 5. Truck runs rough. Dealership says it’s a 5-8 week process to test and get injectors into replace if that’s the issue. Multiple sources have stated it can be a software update issue and some states still waiting after weeks for fix to be made and paying for a rental car out pocket to have reliable transportation for work and taking care of kids.

NHTSA ODI #11715721

Mileage unknown · Sep 16, 2025

Electrical SystemEngineFuel/propulsion System

Read full complaint

On Sunday, 9/14/25 driving on a 70 MPH interstate highway, pulling a trailer behind the Newly-purchased 2025 truck (only 700 miles on it), the road narrowed down to one lane because of a traffic obstruction and cones. As I slowed down to about 35 mph and then went to speed up again as the traffic eased, the vehicle provided a ping notification sound and the Electronic Vehicular Instrument Cluster (EVIC) display stated something to the effect of "Shift into 'P' to start vehicle". I realized that the vehicle was not responsive as expected, indicating power steering had failed, likely because the engine was off. I'm uncertain whether the steering wheel was locked, which is likely, because at that speed, only a very slight turn of the wheel was needed to move into the closed lane on the straight road. I continued to coast to get the vehicle and trailer over to the right, hugging the cones which were mid-lane in the closed lane, allowing other cars to go around me while I came to a complete stop on the interstate to shift into Park. Once I could get the gearshift into Park, I started the vehicle again, at which point it drove normally. The trailer had been weighed just that morning and both tongue and overall weight were well within the capacity of the vehicle. It was hooked up to the electrical systems of the tow vehicle via the 7-pin connector. I had the EVIC set to show vehicular information - oil pressure, oil temperature, etc. I similarly had information like battery voltage displayed on a widget on the uconnect screen. Everything looked nominal. No error code was logged to my knowledge. I have since seen similar reports from other 2025 RAM owners in NHTSA complaints and on social media. My dealership is unaware of these issues having been reported elsewhere, so they are starting from scratch in finding a diagnosis on a seemingly intermittent issue. That process is ongoing at this time.

NHTSA ODI #11687673

Official recalls

26V288000 · Power Train:automatic Transmission:control Module (tcm/pcm/tecm)

May 7, 2026

Chrysler (FCA US LLC) is recalling certain 2023-2026 Ram 2500 Pick up trucks. A software error in the powertrain control module may improperly allow the vehicle speed to exceed the tire speed rating, which can result in a loss of vehicle control.

Consequence & remedy

Consequence: Loss of vehicle control increases the risk of a crash.

Remedy: Dealers will update the powertrain control module software, free of charge. Owner notification letters were mailed May 21, 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 43D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov beginning May 14, 2026.

26V225000 · Electrical System: Instrument Cluster/panel

Apr 9, 2026

Chrysler (FCA US, LLC) is recalling certain 2025-2026 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Ram 3500 Cab Chassis, Ram 4500 Cab Chassis, and Ram 5500 Cab Chassis vehicles. A software error may cause the instrument panel display to fail. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standards numbers 102, "Transmission Shift Position Sequence," 105, "Hydraulic and Electric Brake Systems," 108, "Lamps, Reflective Devices, and Associated Equipment," 126, "Electronic Stability Control Systems for Light Vehicles," 135, "Light Vehicle Brake Systems," 138, "Tire Pressure Monitoring System," and/or 208, "Occupant Crash Protection."

Consequence & remedy

Consequence: An instrument panel display that fails to show critical safety information, such as gear selection and warning lights, increases the risk of a crash.

Remedy: Dealers will update the instrument panel software, free of charge. Owner notification letters were mailed May 5, 2026. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is 35D. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov beginning April 16, 2026.

26V059000 · Electrical System: Integrated Trailer Brake Control; Exterior Lighting:brake Lights; Exterior Lighting:turn Signal

Feb 2, 2026

Chrysler (FCA US, LLC) is recalling certain 2024-2026 Jeep Wagoneer S, 2025-2026 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Ram 3500 Cab Chassis, Ram 4500 Cab Chassis, Ram 5500 Cab Chassis, and 2026 Jeep Cherokee vehicles. Due to an improperly designed trailer tow module, the trailer lights may fail to illuminate and the trailer brakes may fail.

Consequence & remedy

Consequence: Trailer brake lights and turn signals that do not illuminate reduce visibility to other drivers, increasing the risk of a crash. Additionally, trailer brakes that fail increase the risk of a crash.

Remedy: Dealers will replace the trailer tow module, free of charge. Owner notification letters were mailed beginning March 17, 2026. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 03D. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on February 10, 2026.

Additional source detail variants (3)

Exterior Lighting:brake Lights

Consequence: Trailer brake lights and turn signals that do not illuminate reduce visibility to other drivers, increasing the risk of a crash. Additionally, trailer brakes that fail increase the risk of a crash.

Remedy: Dealers will replace the trailer tow module, free of charge. Owner notification letters were mailed beginning March 17, 2026. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 03D. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on February 10, 2026.

Exterior Lighting:turn Signal

Electrical System: Integrated Trailer Brake Control

25V882000 · Air Bags: Air Bag/restraint Control Module; Electronic Stability Control (esc)

Dec 18, 2025

Chrysler (FCA US, LLC) is recalling certain 2025 Ram 2500 Pickup, 3500 Pickup, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis trucks. A software error in the occupant restraint controller module may cause the driver's side air bag and/or seat belt pretensioner not to deploy in a crash and disable the electronic stability control (ESC) system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 208, "Occupant Crash Protection" and 126, "Electronic Stability Control Systems."

Consequence & remedy

Consequence: Driving with a disabled electronic stability control system increases the risk of a crash. Additionally, a driver's side air bag or seat belt pretensioner that does not deploy increases the risk of injury in a crash.

Remedy: Dealers will update the occupant restraint controller module software, free of charge. Owner notification letters were mailed January 15, 2026. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is C3C. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on December 19, 2025.

Additional source detail variants (2)

Air Bags: Air Bag/restraint Control Module

Consequence: Driving with a disabled electronic stability control system increases the risk of a crash. Additionally, a driver's side air bag or seat belt pretensioner that does not deploy increases the risk of injury in a crash.

Remedy: Dealers will update the occupant restraint controller module software, free of charge. Owner notification letters were mailed January 15, 2026. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is C3C. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov on December 19, 2025.

Electronic Stability Control (esc)

25V826000 · Electrical System: Instrument Cluster/panel

Dec 1, 2025

Chrysler (FCA US, LLC) is recalling certain 2025-2026 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Ram 3500 Cab Chassis, 4500 Ram Cab Chassis, and Ram 5500 Cab Chassis vehicles. A software error may cause the instrument panel cluster display to be blank. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 135, "Light Vehicle Brake Systems," 105, "Hydraulic and Electric Brake Systems," and 102, "Transmission shift lever sequence, starter interlock, and transmission braking effect."

Consequence & remedy

Consequence: An instrument panel display that does not show critical information, such as warning lights or gear selection, increases the risk of a crash.

Remedy: Dealers will inspect and update the instrument panel software or replace the instrument panel cluster, as necessary, free of charge. Owner notification letters were mailed December 18, 2025. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's numbers for this recall are B4C and B8C. Vehicle Identification Numbers (VINs) involved in this recall became searchable on NHTSA.gov beginning December 4, 2025.

25V297000 · Electrical System: Instrument Cluster/panel; Power Train:automatic Transmission:gear Position Indication (prndl)

May 8, 2025

Chrysler (FCA US, LLC) is recalling certain Ram 2500 and Ram 3500 vehicles equipped with a 3.5" cluster and column shifter. A software error may cause the gear selection display to be inaccurate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Control and Displays."

Consequence & remedy

Consequence: An inaccurate gear selection display may mislead the driver as to what gear is actually selected, leading to unexpected vehicle movement and increasing the risk of a crash.

Remedy: Dealers will update the cluster software, free of charge. Owner notification letters were mailed May 22, 2025. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 36C.

Additional source detail variants (2)

Electrical System: Instrument Cluster/panel

Consequence: An inaccurate gear selection display may mislead the driver as to what gear is actually selected, leading to unexpected vehicle movement and increasing the risk of a crash.

Remedy: Dealers will update the cluster software, free of charge. Owner notification letters were mailed May 22, 2025. Owners may contact Chrysler customer service at 800-853-1403. Chrysler's number for this recall is 36C.

Power Train:automatic Transmission:gear Position Indication (prndl)

Consequence: An inaccurate gear selection display may mislead the driver as to what gear is actually selected, leading to unexpected vehicle movement and increasing the risk of a crash.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

No exact-year investigations in this snapshot.