2025 RAM 1500

ADA Continuously fails at all road speeds and road/weather conditions. System will not consistently remain engaged. Some failure are intermittent other disable the system for extended periods of time. This has been occurring for 10 months. Triger event is suspected to be on or around time of PCM update 2 attempts to rectify with manufacture have resulted in nil change to system behaviour

This vehicle has a severe safety defect in its Instrument Panel Cluster that is the subject of NHTSA Safety Recall 25V-826. Despite multiple repair attempts, including a complete hardware replacement of the entire Instrument Panel Cluster, the defect remains unresolved. To date, the vehicle has been out of service for a cumulative 86 days for this issue. On June 24, 2026, after the full component replacement, the instrument panel cluster suffered a complete blackout while I was operating the vehicle at highway speeds. This resulted in a total loss of the speedometer and all safety information. A subsequent power-cycle restart failed to initialize the system. This is a documented, ongoing highway safety hazard. Video evidence of this failure is on file with the Texas DMV (active Lemon Law Case No. 26-0011927) and has been provided directly to the manufacturer's legal counsel. The manufacturer has failed to resolve this safety defect. Videos available upon request.

The factory-installed tow mirrors on this vehicle present a severe safety hazard due to a major engineering and ergonomic design flaw. The physical size and placement of the side mirrors are excessively large, creating massive blind spots at the front pillars of the windshield. This completely obstructs the driver's forward-diagonal visibility, creating a "blind wall" effect that fully hides oncoming mid-size sedans, motorcycles, and pedestrians when approaching urban intersections, roundabouts, and crosswalks. This layout is entirely unsuitable for normal daily use and causes extreme driver distress due to near-miss situations. Additionally, the advanced safety electronics housed within these mirrors malfunction constantly. The Blind Spot Monitoring (BSM) warning lights freeze or lock up on the glass, or the dashboard displays a permanent "Blind Spot System Unavailable" error message shortly after starting the vehicle or deploying the power-folding mirrors. The 360-degree perimeter camera feed also experiences intermittent signal loss. The hardware components are available for inspection upon request. The electrical faults have been confirmed by an authorized dealer but a permanent design fix for the forward visibility hazard is required from the manufacturer.

I purchased the Vehicle in April 2025 with 500 miles as NEW. Within 3k miles, I had the AEB and “BLIND Spot warning unavailable “ both service required messages come on the vehicle. The Hazards stay on the side mirrors while driving, which make it dangerous also believing you have vehicles in your blind spot creating a safe hazard and also beeps at times. This continued to happen constantly. I was told at first presentation that there was an internal TBS(bulletin) with FCA and there was no fix. Then at 4k miles, it happened again. I took it back, they did a software update. It continued to happen. 6k miles, more software updates. A wiring harness was replaced. It is still happening for both. At 10k miles. After software updates, wiring harness update. It continues to happen.

My infotainment screen makes a loud buzzing noise at least 3days per week, and then it shuts down and reboots itself, this happened several times while backing out of parking spots and I lost my rear view camera, also sometimes while driving on the Highway both of my blind spot monitor lights on my mirrors will come on and my truck will display BMS malfunction and this stops my adaptive Cruise and hands free Cruise while driving on Highway at 65mph or higher. I've taken in to the dealership and they say they can't reproduce the problem with the buzzing coming from The infotainment system, and the Blindspot Monitoring System will self correct after my vehicle sits overnight, but my RAM documents the BMS and sends me an alert to take into dealership for service, but once again the dealerships say they can't replicate the issue with the bms.

There was a recall for the cluster pack on the screen that shows my speedometer and safety features such a lane departure, turn signals, etc. I had the recall completed and my screen still blacks out randomly. It has been in the shop 3 times to fix the screen, but Ram cannot get it fixed. I have multiple pictures and videos of the screen blacking out if anyone is interested I can email them.

For the sixth time, the vehicle has stopped in mid traffic. A couple of close incidents of almost getting hit in two lane traffic, at stop lights surrounded by traffic, on interstate. The incident today came after a supposed, "final fix" for the blind spot warning. It is not a warning, the vehicle completely hard brakes to a complete stop and shut down of all systems. We have to quickly respond, turn the button on quickly and hope it starts. I am now terrified to drive the vehicle. The original dealer told me to take to local dealer, they acted like I was crazy trying to describe these incidents, initially, but then 2 weeks ago, they had a service recall that stated exactly what I had experienced. It does not work. I am terrified to drive it and invested over 90,000 in a quality, American built truck to be dismissed, then believed and survived. I can't keep it, please help.

While driving my 2025 Ram RHO on the freeway I experienced a sudden steering malfunction resulting in loss of normal steering assist and abnormal steering response. The steering became stiff and difficult to turn and maintain control. This occurred without warning. The failure creates a serious safety risk. Particularly at highway speeds, as it requires excessive force to steer and could result in loss of vehicle contol,collission,rollover. the vehicle has been at the dealership now for 40+ days awaiting repair. the dealer diagnosed the issue as a steering system failure but required parts are on national back order with NO estimated delivery date The vehicle is currently undrivable and unsafe to operate. The defect presents a clear safety hazard because: sudden steering failure loss of steering assist failure has occurred at thighway speeds driver may be unable to safely maneuver vehicle or avoid obstacle

Blind Spot Alert has no volume setting. It is either on or off. It is extremely loud to the point it will startle the driver and occupants. While in motion in left turn lane it will detect vehicles in opposing lanes and sound. When making turns, it will detect my trailer and sound. It will detect utility poles and sound. The over detecting wouldn't be such a problem, but it is probably four times volume needed for the alert. Front collision, rear collision both have volume settings and "Low" has plenty of volume. Most people complaining on the forums simply turn off the audio alert due to no volume setting and rely only on the light. The volume is so loud it defeats the purpose of the audio alert when the only option is to turn it off. Please require RAM to fix this problem.