IllustrationI was sold a vehicle with the incorrect front brakes, an open recall on airbag and bad transfer case all looked at and confirmed by a dealer .
2017 Porsche Macan
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Macan years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
All reported categories
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 14 of 63 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Air Bags. Review the 21 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Service Brakes. Review the 10 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine. Review the 8 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
3 crash reports1 fire reports0 injury reports
Air Bags complaints
21 reportsOn [XXX] at around 6pm the AIRBAG light displayed in instrument cluster and remained steady after vehicle was placed in motion. I called my nearest service dealer at Porsche Carlsbad and they ran a vehicle diagnosis using their scanning tool. The finding was that the Front Passenger Seat Occupancy Sensor / Module was defectiv…
Read full complaint
On [XXX] at around 6pm the AIRBAG light displayed in instrument cluster and remained steady after vehicle was placed in motion. I called my nearest service dealer at Porsche Carlsbad and they ran a vehicle diagnosis using their scanning tool. The finding was that the Front Passenger Seat Occupancy Sensor / Module was defective and needs replacement. The dealer also said that a recall had been issued (for which my vehicle's VIN was not listed). I called Porsche Company North America and they said my VIN was not part of that campaign to fix this issue, but I feel that this recall related to vehicle safety should have included my vehicle since it was within the make/model/year and trim of those included in the recall. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Not in a crash, but the leather on the dashboard is peeling off and airbags may not deploy properly because of it. I think this is a safety concern if not addressed early. Leather on dashboard is peeling off due to poor manufacturing.
The front passenger seat occupancy sensor mat degraded and fails to detect a passenger in the front seat.
airbag light comes on and off intermittently I am aware there were some problems with the airbag sensor that year and recalls for other models, not my vin, I have called and confirmed there are none for mine. seems to act up more after or while I have a passenger so I suspect (almost positive) this is for the passenger airbag. a…
Read full complaint
airbag light comes on and off intermittently I am aware there were some problems with the airbag sensor that year and recalls for other models, not my vin, I have called and confirmed there are none for mine. seems to act up more after or while I have a passenger so I suspect (almost positive) this is for the passenger airbag. also when I have a passenger the amber indicator that says airbag on off will randomly switch to off and I'll get the dash light. this makes me think its the airbag weight sensor pad that deteriorates easily that other cars had a recall for but not mine. no water was spilled on the seat before it started acting up the way it has been. as well, the engine motor mounts have a tendency to break fairly easily and fast causing vibrations and possible safety issues.
A recall was issued by Porsche on 2015-2017 Macan SUV's for front Airbag deployment issues. The recall code was AH02 safety campaign #17V133000. I contacted Porsche because my fault indicator for the front airbag lit up on my dash. I was informed that my VIN was not included. I asked if they could check if my airbag had an ident…
Read full complaint
A recall was issued by Porsche on 2015-2017 Macan SUV's for front Airbag deployment issues. The recall code was AH02 safety campaign #17V133000. I contacted Porsche because my fault indicator for the front airbag lit up on my dash. I was informed that my VIN was not included. I asked if they could check if my airbag had an identification number and if it was in the batch under recall. They said that they could not look it up. My car was a custom build and may have come down the line at a different time than other stock builds which may have impacted the timing of the airbag install. Either way, my car was in the date range and has the airbag default indicator on therefore it should be covered. I had it tested for $265.00 and they covered themselves saying that it was an airbag control unit and seat pad Fault code B102204. What's the difference, the recall covers faulty airbags and mine is defective and they won't cover it. Please give me some guidance as to what my available options are at this point.
I fear a possible non-detection of front passenger. The “Airbag warning lamp” or “Passenger Airbag OFF” lamp is activated. I fear the front passenger airbag may not deploy in a type of a crash in which it is designed to deploy. My VIN is not falling under the AMA2 Recall campaign even though I feel it should be.
The contact owns a 2017 Porsche Macan. The contact received notification of NHTSA Campaign Number: 21V131000 (Air Bags) however, the part to do the recall repair was not yet available. The dealer was made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. …
Read full complaint
The contact owns a 2017 Porsche Macan. The contact received notification of NHTSA Campaign Number: 21V131000 (Air Bags) however, the part to do the recall repair was not yet available. The dealer was made aware of the issue. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact had not experienced a failure. Parts distribution disconnect.
Passenger Airbag Fault light is on and has been steadily on for 1 month. Was told my vehicle is not covered by the recall even though it is the same exact part "Passenger seat occupancy detection seat foam mat faulty, replace seat occupancy sensor." that requires repair. The repair cost is almost $4000 including waiting up to 4…
Read full complaint
Passenger Airbag Fault light is on and has been steadily on for 1 month. Was told my vehicle is not covered by the recall even though it is the same exact part "Passenger seat occupancy detection seat foam mat faulty, replace seat occupancy sensor." that requires repair. The repair cost is almost $4000 including waiting up to 4 weeks for the parts to come in. The maker is not offering a loaner vehicle and was advised I could drive the vehicle as is. It is unsafe to drive around with a faulty safety system especially since i commute with passengers.
The contact owns a 2017 Porsche Macan. The contact became aware that her VIN was included in NHTSA Campaign Number: 21V131000 (Air Bags) however, the local dealer and several other unknown dealers informed her that parts for the recall repair were not yet available. The contact stated that the manufacturer had exceeded a reasona…
Read full complaint
The contact owns a 2017 Porsche Macan. The contact became aware that her VIN was included in NHTSA Campaign Number: 21V131000 (Air Bags) however, the local dealer and several other unknown dealers informed her that parts for the recall repair were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the issue but did not provide any assistance. The contact had not experienced a failure. Parts distribution disconnect.
Official recalls
623V443000 · Seat Belts:rear/other:anchorage
Jun 26, 2023
Porsche Cars North America, Inc. (Porsche) is recalling certain 2016-2020 Macan S, 2017-2020 Macan, 2017 Panamera Turbo, 2018 and 2020 Macan Turbo and Panamera 4, 2018 Macan Sport Edition, Panamera 4 E-Hybrid, and 2019 Panamera 4 Sport Turismo vehicles. The screw that attaches the lower seat belt anchor to the seat frame on the outboard rear seats may not have been tightened properly.
Consequence & remedy
Consequence: An improperly tightened seat belt anchor can detach during a crash, increasing the risk of injury.
Remedy: Dealers will replace and tighten the lower rear outboard seat belt anchor screws, free of charge. Owner notification letters are expected to be mailed August 24, 2023. Owners may contact Porsche's customer service at 1-800-767-7243. Porsche's number for this recall is APA9.
21V131000 · Air Bags:sensor:occupant Classification:front Passenger
Mar 3, 2021
Porsche Cars North America, Inc. (Porsche) is recalling certain 2017-2018 Macan, Macan Turbo Kits, Macan GTS, 2015-2018 Macan S, and Macan Turbo vehicles. The front passenger seat occupancy sensor mat may degrade and fail to detect a passenger in the front seat.
Consequence & remedy
Consequence: The air bag will not deploy during a crash if a front passenger is undetected, increasing the risk of injury.
Remedy: Porsche will notify owners, and dealers will replace the sensor mat and seat cushion, free of charge. Owner notification letters were mailed October 25, 2021. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is AMA2.
20V077000 · Fuel System, Gasoline:delivery:fuel Pump
Feb 12, 2020
Porsche Cars North America, Inc. (Porsche) is recalling certain 2015-2018 Macan vehicles. The fuel pump service cover may contact the flow nozzle on the filter flange of the fuel pump, potentially causing cracks and a fuel leak.
Consequence & remedy
Consequence: Fuel leakage in the presence of an ignition source may increase the risk of a fire.
Remedy: Porsche will rework or replace and apply a protective film to the fuel pump flange. in addition, the fuel pump flange will be inspected and replaced if cracks are present. The recall began April 10, 2020. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is ALA2.
18V844000 · Equipment
Nov 28, 2018
Porsche Cars North America, Inc. (Porsche) is recalling certain 2017 Porsche Cayenne Turbo S, Cayenne Turbo, Cayenne Plug-in Hybrid, Cayenne GTS, Cayenne Plug-in Hybrid Platinum Edition, Macan Turbo and Macan GTS vehicles, 2017-2018 Cayenne S, Macan, Cayenne Platinum Edition and Macan S vehicles and 2018 Cayenne vehicles equipped with the optional ski bag. The ski bag fastening strap may have been sewn with incorrect thread, possibly resulting in the strap seams tearing and the ski bag being unsecured in the event of a crash.
Consequence & remedy
Consequence: If the ski bag detaches during a crash, it can increase the risk of injury.
Remedy: Porsche will notify owners, and dealers will replace the ski bags, free of charge. The recall began January 10, 2019. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is AJ12.
17V289000 · Fuel System, Gasoline:delivery:fuel Pump
May 3, 2017
Porsche Cars North America, Inc. (Porsche) is recalling certain 2015-2017 Macan S and Macan Turbo vehicles, and 2017 Macan, Macan Turbo with the Performance Package, and Macan GTS vehicles. The fuel pump flange on the affected vehicles may crack, allowing fuel to leak.
Consequence & remedy
Consequence: A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy: Porsche will notify owners, and dealers will inspect the flanges, replacing any that are cracked. Flanges that aren't cracked will have a protective film applied. These repairs will be performed free of charge. The recall began on July 19, 2017. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is AH06.
16V680000 · Suspension:front
Sep 20, 2016
Porsche Cars North America, Inc. (Porsche) is recalling certain model year 2017 Macan, Macan S, Macan GTS, and Macan Turbo vehicles. In the affected vehicles, the anti-rollbar connecting links may move out of position allowing the vehicle to oversteer in certain driving conditions.
Consequence & remedy
Consequence: Vehicle oversteer may lead to a loss of vehicle control, increasing the risk of a crash.
Remedy: Porsche will notify owners, and dealers will inspect, and as necessary, replace the front anti-rollbar links, free of charge. The recall began January 2017. Owners may contact Porsche customer service at 1-800-767-7243. Porsche's number for this recall is AG06.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.