When problems were reported
Mileage at the reported incident
Limited mileage data: 0 of 0 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
NHTSA owner reports · September 18, 2026 snapshot.
Official recalls
9Jan 2, 2019
Pierce Manufacturing (Pierce) is recalling certain 2004-2018 Arrow XT, Dash, Enforcer, Impel, Quantum and Velocity aerial vehicles. The aerial device may unexpectedly rotate to the right when the ladder is being extended.
Consequence & remedy
Consequence: If the aerial device moves in an unexpected direction, the ladder may contact an object, such as a building or an electrical wire, increasing the risk of injury.
Remedy: Pierce will notify owners, and dealers will reprogram the aerial control module, free of charge. The recall began February 28, 2019. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B295.
Jul 11, 2018
Pierce Manufacturing (Pierce) is recalling certain 2007-2017 Pierce Velocity, Impel, Arrow-XT, Quantum, and Enforcer emergency response vehicles equipped with 75ft aerial devices with a 21 inch or 28 inch limited retraction bracket. The bracket on the aerial device may detach from the aerial and fall to the ground.
Consequence & remedy
Consequence: If the bracket falls, it could strike a person below.
Remedy: Pierce will notify owners, and dealers will install additional hardware to mount the limited retraction bracket, free of charge. The recall began on August 22, 2018. Owners may contact Pierce customer service at 1-888-974-3723. Pierce's number for this recall is 74B290.
May 30, 2017
Pierce Manufacturing (Pierce) is recalling certain 1999-2013 Arrow XT, Dash, Enforcer, Quantum and Velocity fire trucks equipped with the electric All-steer rear steering option. The affected vehicles have rear steer axle shafts that were not properly heat treated.
Consequence & remedy
Consequence: Axle shafts that are not properly heat treated may break and potentially disable the vehicle, increasing the risk of a crash.
Remedy: Pierce will notify owners, and dealers will replace the rear steer axle shafts, free of charge. An interim notice was mailed on July 24, 2017. The recall began June 3, 2020. Owners may contact Pierce customer service at 1-888-974-3723.
Oct 22, 2013
Pierce Manufacturing Inc. (Pierce) is recalling certain model year 2000-2009 Enforcer and model year 2000-2010 Dash, Lance, and Arrow XT vehicles. While raising or lowering the cab as part of vehicle maintenance, the mounts on which the cab tilt cylinders pivot may fatigue and fail allowing the cab to fall until the safety catch activates.
Consequence & remedy
Consequence: If a person is in the path of the moving cab when a mount fails, the person may be hit by the falling cab, increasing the risk of injury.
Remedy: Pierce will notify owners, and dealers will affix new safety signs advising the operator to stay clear of the cab while it is being tilted, free of charge. The recall began on January 6, 2014. Owners may contact Pierce at 1-920-832-3000. Pierce's recall number is 74B240.
Apr 26, 2011
PIERCE IS RECALLING CERTAIN MODEL YEAR 1999-2008 ARROW XT, DASH, LANCE, AND ENFORCER FIRE APPARATUS MANUFACTURED FROM JUNE 22, 1999, THROUGH MAY 12, 2008, AND EQUIPPED WITH AN ELECTRONIC ACCELERATOR PEDAL. AFTER REPEATED USE WITH EXCESSIVE FORCE, THE ACCELERATOR PEDAL ARM MAY BEND AND CAUSE THE PEDAL TO MOVE CLOSER TO THE FLOOR. IF THE PEDAL ARM BENDS FAR ENOUGH, THE PEDAL MAY CONTACT THE CAB FLOOR WITHOUT WARNING AND STICK IN THE FULL THROTTLE POSITION.
Consequence & remedy
Consequence: IF THE ACCELERATOR PEDAL BECOMES STUCK, THE OPERATOR MAY LOSE CONTROL OF THE VEHICLE INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL REMOVE THE EXISTING ACCELERATOR ARM AND INSTALL A REDESIGNED PEDAL ARM FREE OF CHARGE. THE SAFETY RECALL IS EXPECTED TO BEGIN ON OR ABOUT MAY 9, 2011. OWNERS MAY CONTACT PIERCE AT 1-920-832-3000.
Sep 21, 2010
PIERCE IS RECALLING CERTAIN MODEL YEAR 1998 THROUGH 2008 ARROW XT, LANCE, VELOCITY, ENFORCER, IMPEL, AND DASH CUSTOM FIRE APPARATUS VEHICLES MANUFACTURED FROM MAY 30, 1998 THROUGH NOVEMBER 25, 2008. THE STEERING GEAR BRACKET MAY FRACTURE AND BREAK. IF THIS OCCURS THE STEERING GEAR MAY DETACH FROM THE VEHICLE.
Consequence & remedy
Consequence: DETACHMENT OF THE STEERING GEAR WILL RESULT IN A LOSS OF STEERING CONTROL THAT COULD CAUSE A CRASH.
Remedy: PIERCE WILL NOTIFY OWNERS AND DEALERS WILL INSTALL A NEW STEERING GEAR MOUNTING BRACKET FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 12, 2010. OWNERS ARE BEING INSTRUCTED TO INSPECT THE STEERING GEAR BRACKET PRIOR TO EACH TRIP. THE REMEDY TO REPAIR THIS DEFECT IS EXPECTED TO BEGIN NO EARLIER THE JANUARY 31, 2011. OWNERS MAY CONTACT PIERCE AT 1-888-974-3723.
Jul 8, 2010
PIERCE IS RECALLING CERTAIN MODEL YEAR 2006 THROUGH 2010 ARROW XT, DASH, ENFORCER, IMPEL, QUANTUM, AND VELOCITY FIRE TRUCKS MANUFACTURED FROM OCTOBER 11, 2006 THROUGH JUNE 16, 2010 AND EQUIPPED WITH MERITOR WABCO EX225 REAR DISC BRAKES AND ONSPOT AUTOMATIC TIRE CHAINS. THE MERITOR WABCO EX225 REAR DISC BRAKE CALIPER MAY INTERFERE WITH THE ONSPOT AUTOMATIC TIRE CHAIN BRACKETS. THIS INTERFERENCE MAY RESTRICT THE CALIPER FROM FULL MOVEMENT.
Consequence & remedy
Consequence: IF THIS INTERFERENCE OCCURS, BRAKING PERFORMANCE MAY BE REDUCED WITHOUT WARNING AND A CRASH MAY OCCUR.
Remedy: DEALERS WILL INSTALL NEW AUTOMATIC TIRE CHAIN BRACKETS. THE NEW BRACKETS PROVIDE ADDITIONAL CLEARANCE FOR THE FULL ACTUATION OF THE DISC BRAKE CALIPERS. THIS SERVICE WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN IN JULY 2010. OWNERS MAY CONTACT PIERCE AT 1-920-832-3000.
Jun 28, 2010
PIERCE IS RECALLING CERTAIN MODEL YEAR 2003 THROUGH 2009 CUSTOM CONTENDER, DASH, ENFORCER, IMPEL, LANCE SABER, AND VELOCITY FIRE TRUCKS MANUFACTURED FROM FEBRUARY 20, 2003, THROUGH MARCH 27, 2009. THESE TRUCKS MAY BE EQUIPPED WITH DROP-DOWN FIRE HOSE TRAYS MOUNTED UNDER THE FRONT BUMPER. THE HOSE TRAY LATCH MAY ACCIDENTALLY OPEN WHILE THE VEHICLE IS IN MOTION.
Consequence & remedy
Consequence: IF THIS OCCURS THE FIRE HOSE MAY DROP TO THE ROADWAY WITHOUT WARNING. POTENTIAL INJURY TO PEOPLE AND PROPERTY MAY OCCUR. THE SUDDEN HOSE DEPLOYMENT MAY ALSO DISTRACT DRIVERS TRYING TO AVOID THE HOSE AND A CRASH MAY OCCUR.
Remedy: A NEW AND IMPROVED LATCH DESIGN HAS BEEN DEVELOPED AND A NEW HOSE BOX INCORPORATING THE NEW LATCH WILL BE INSTALLED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON OCTOBER 4, 2010. OWNER MAY CONTACT PIERCE AT 1-920-832-3000.
Nov 18, 2008
PIERCE IS RECALLING 15 MY 2007-2008 DASH, ENFORCER, IMPEL, QUANTUM AND VELOCITY FIRE TRUCKS EQUIPPED WITH ARVINMERITOR REAR DISC BRAKES AND HENDRICKSON FIREMAAX SUSPENSION. INTERFERENCE WITH THE BRAKE CALIPER ADJUSTER BOLT SLEEVE AND THE SUSPENSION BEAM MAY OCCUR. THIS INTERFERENCE MAY OCCUR IF THE RIGHT HAND AND LEFT HAND BRAKE COMPONENTS WERE ASSEMBLED ON THE WRONG SIDE OF THE AXLE. THE ADJUSTER BOLT IS DESIGNED TO ROTATE AS THE BRAKE PADS WEAR. IF THE SLEEVE BECOMES DAMAGED, THE SLEEVE MAY PREVENT THE ADJUSTER FROM ROTATING.
Consequence & remedy
Consequence: IF THE ADJUSTER CAN NOT ROTATE, BRAKE PERFORMANCE MAY BE COMPROMISED AND A CRASH MAY OCCUR.
Remedy: DEALERS WILL ADJUST THE BOLT SLEEVE AND THE PROPER COMPONENTS FREE OF CHARGE. ALL OWNERS HAVE BEEN NOTIFIED BY ARVINMERITOR.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1EQ11003 · Williams Controls Accelerator Pedals
Opened May 12, 2011 · Closed Jul 19, 2011
Status: closed (inferred from source dates) · Vehicle Speed Control:accelerator Pedal
On April 26, 2011, Pierce Manufacturing, Inc. (Pierce) notified the NHTSA that it had decided certain Pierce fire trucks, manufactured between June 22, 1999, and May 12, 2008, contain a safety related defect. Pierce stated that certain model year 1999 through 2008 Arrow XT, Dash, Lance, and Enforcer vehicles contain a Williams Controls, Inc. (Williams Controls) suspended electronic accelerator pedal that may become bent after repeated use with excessive force. If the pedal arm bends far enough, the pedal may contact the cab floor without warning and stick in the full throttle position. If the accelerator pedal becomes stuck, the operator may lose control of the vehicle increasing the risk of a crash. This issue was assigned recall number 11V-255.On May 12, 2011, RMD mailed an information request (IR) letter to Williams Controls requesting a list of customers who purchased the same or similar defective accelerator pedals.Williams Controls responded to RMD's IR letter on June 9, 2011 with a list those companies who purchased the same accelerator pedal.The list was submitted to NHTSA's Office of the Chief Counsel under a request for confidentiality.Williams Controls' response letter outlined several key points.First, it was noted that these pedals, item number 131507, are generic parts that are purchased by engineering staffs in accordance with their own specifications.According to Williams Controls, Pierce modified their purchased pedals post-purchase and this modification reduced the strength of the accelerator pedal assembly.Also, Williams Controls stated that it has, never had a warranty claim or other notice, other than by Pierce on their modified pedal, due to lever arm permanent deformation for item number 131507.While Williams Controls submitted a list of companies that purchased item number 131507, it noted that it did not sell the same or similar defective pedal assemblies to any company as the subject pedals were modified by Pierce.This Equipment Query is satisfied as, because of modifications not conducted by the pedal manufacturer, the same or similar pedals were not sold to other vehicle manufacturers and no other vehicles should be affected.However, RMD will continue to monitor recall activity to see if any similar issues are found in other manufacturers' vehicles.This EQ is closed.
Illustration