2023 Nissan Versa

My 2023 Nissan Versa S5MT has a reoccurring issue where under a stall condition the car will occasionally loose all power on a restart. This happened once in traffic. I got to a red light and fumbled the clutch pedal and stalled in stopped traffic. I went to get in front of a semi that was moving faster then me and if I didn't realize what happened I may have cut him off and gotten T-boned. In a 2500lb car like the Versa, that could have killed me. I have taken the vehicle to the dealership and they failed to replicate the issue. There were no symptoms or warnings prior to the failure. Many others have claimed this issue exists with their 2023 Nissan Versas and also claimed the dealership could not fix theirs.

Car is 4 months old 12,000 miles. 3 intermittent episodes upon startup car has only 20% power even with gas pedal to the floor like it’s in limp home mode. All episodes so far on cold start up 60-80 degree weather. No CEL lights, no misfire, no odd smells. YouTube poster has same problem and ran obd scan tool showing crank position sensor malfunction. Others suspect problem is software issue associated with Nissan removing the push button start from Versa S trim level only cars in 2022/2023 model years and possibly in manual transmission cars only. Car is extremely unsafe to drive in this condition and the female owner is reluctant to drive it 50 miles to work and be stranded. Nissan dealer examined the car and found no issues on first attempt. Car going to the repair shop for a second time.

My car stalled while backing up in heavy gravel. I started out and did not notice that my car was not accelerating. I pulled out into a 65 mph road and began shifting and realized my car was not accelerating. It was a road where pulling over was dangerous. I found an area and turn the car off. I restarted (fixed it when 1st occurrence happened). Got back on the road and again my car was not accelerating above 25-30 mph. Pulled out off the road shut the car off and waited 2-3 minutes and again restarted and the car resumed working properly. This was extremely dangerous due to the road not having safe pull outs. This is the second time this has occurred in my new car.

I had stalled my car and after I restarted it my car had a significant loss of power. I shifted and car would not accelerate at all top speed was 25-30 mph. I had my gas pedal depressed and no change in speed/ I limped to a dealership turned car off and restarted and car was back to normal. This vehicle was 2 days from purchase and less than 500 miles on it. I reported to dealer and was never called back for instructions on how to proceed

The car lost power and would not go over 40 MPH. This made for a dangerous situation on the road. P2615-00 A Crankshaft Position Sensor code was thrown, but when I took it to the dealer they could not replicate the problem. I have video documentation of the problem I can provide. Since I posted my video, several other people have come forward with the same issue. It seems as if when the manual transmission version of this car is stalled or fails to start, it will throw this code and severely reduce the power. It seems to be a simple software issue, but so far all the Nissan dealers who have looked at these cars have not been able to provide a fix. This problem apparently affects all 2022-2023 Versas with the manual transmission. The problem is likely they did not properly code for the removal of the push to start button. Here is video documentation https://www.youtube.com/watch?v=yasWIICEbJ0

Driver side visor sometimes falls straight down. In this position, it is not possible to drive safely. When the visor will not hold its position, a person is forced to put the visor against the Driver side window. That might be fine out on the open highway, but it is not safe for driving around city streets. There has been low usage of this visor since this vehicle rolled off the dealer lot 4 months ago. The dealer claims outside use caused the visor to be inoperable. I believe it is more a matter of it being defective.