1997 Nissan D21

RECEIVED NOTICE FROM GOODYEAR TIRE & RUBBER COMPANY THAT CERTAIN P215/70R14 DOUGLAS ETRA-TRAC A/W IT PRODUCED HAVE EXPERIENCED ADVERSE SERVICE CONDITIONS THAT HAVE LED TO TREAD AREA SEPARATION. IN THERE LETTER I WAS DIRECTED TO GO TO THE NEAREST WAL-MART RETAIL OUTLET TO SEE IF I QUALIFIED FOR THE FREE REPLACEMENT. I QUALIFIED. MY VEHICLE WAS PULLED INTO THE BAY, THE TIRES WERE REPLACE, AND I WAS THEN PRESENTED WITH A BILL OF $118.00 FOR THE NEW TIRES. IT WAS THEN THAT THEY TOLD ME THAT THEY PRORATE THE OLD TIRES AND GAVE ME A SMALL DISCOUNT FOR TIRE WARE. MY OLD TIRES SHOWED NO DEFECT AT THE TIME AND I BROUGHT THEM IN AS A PRECAUTION IN COMPLIANCE WITH THE RECALL. HAD I KNOW THAT I WAS GOING TO BE THE VICTIM OF A BAIT AND SWITCH SCHEME TO GET ME TO BUY THE NEW TIRES. I WAS TOLD THAT THEY HAD PULLED THE DEFECTIVE TIRES OFF THE SHELF, SO THEY HAD TO SELL ME A MORE EXPENSIVE BRAND AS A REPLACEMENT. THAT TO ME IS BAIT AND SWITCH. I KNOW HAVE TO MORE EXPENSIVE TIRES ON MY VEHICLE THAN I NEED AND MY FINANCES HAVE SUFFERED BECAUSE OF IT. *TR

I HAD PURCHASED A SET OF SEVENTEEN INCH CENTERLINE RIMS, AND HAVE HAD NOTHING BUT PROBLEMS. THE MANUFACTURING PROCESS DIDNT IDENTIFY THE CENTERPIECE WHICH PROTRUDES AND APPLIES PRESSURE TO THE VALVE STEM CAUSING IT TO EVENTUALLY SHEAR OFF AND RAPIDLY FLATTEN MY TIRE. SINCE IM RUNNING LOW PROFILE TIRES WITH THE RIMS IT IS HARD TO IDENTIFY FLAT TIRES UNTIL HITTING SOMETHING THAT FEELS SOLID. IVE HAD TWO SHEAR OFF SO FAR AND HAVE SPENT HUNDREDS IN TIRES AND WHEEL REPAIRS OR REPLACEMENT BUT STILL MORE IS NEEDED TO REMOVE NUMEROUS DENTS THAT EVEN WHEN REPAIRED WONT LOOK LIKE THEY DID BEFORE. IVE CONTACTED CENTERLINE ON SEVERAL OCCASIONS AND HAVE BEEN TOLD I MUST PAY TO HAVE THEM SHIPPED TO LOS ANGELES WHERE THEY WILL ALTER THE RIMS. I PAID FOR THESE RIMS WITH THIS FLAW AND CENTERLINE EXPECTED ME TO PAY FOR THEM TO BE FIXED. CENTERLINE MANUFACTURED THIS PROBLEM AND SHOULD BE THE ONES PAYING TO SHIP OR REPLACE THE RIMS. BEING A FULL TIME STUDENT CURRENTLY MONEY IS UNDERSTANDABLY TIGHT, AND MY BELIEVE THIS THAT IF THE RIMS CANT BE SAFELY MANUFACTURED THEY SHOULDNT BE MANUFACTURED AT ALL. MY OCCASIONAL TWO YEAR OLD PASSENGERS SAFETY IS OF UP MOST IMPORTANCE, AND HAVING A BLOW OUT CAN OBVIOUSLY HAVE VERY DANGEROUS RESULTS. CENTERLINE APPARENTLY CARES MORE ABOUT THE MONEY THEN THE SAFETY OF THEIR CUSTOMERS AND FOR THAT REASON IM WARNING POSSIBLE CUSTOMERS OF THE DANGERS SOME CENTERLINE RIMS CAN RESULT IN, AND THEIR LACK OF DOING WHAT IS MORALLY AND ETHICALLY RIGHT BECAUSE OF LOSING A BUCK OR TWO.

I'M TRANSIT MECHANIC 30 YEARS, PROIR COAST GAURD DOT, KEEP TIRES INFLATED 35LBS AT ALL TIMES, CHECK OFTEN, ROTATE 5-7 THOUSAND MILES,LARGEST LOAD EVER CARRIED LESS THAN 300 LBS-MULCH FOR YARD, VEHICLE UNLOADED AT TIME OF TIRE SEPARATION. IT WOULD APPEAR THAT THE OTHER THREE TIRES ARE ON THE VERGE OF SEPERATION. I HAVE PARKED VEHICLE UNTIL I HEAR FROM NHTSA.*AK

TWO TIRES HAVE AN UNUSUAL BULGE ON THE INSIDE ABOUT 0.25 IN WIDE, 0.125 IN TALL, RUNNING ACROSS FROM RIM TO RIM. I BELIEVE THIS WAS THE SOURCE OF THE INCREDIBLE GRINDING NOISES. I THOUGHT THE BRAKES WERE BAD, SO I HAD THEM REBUILT, BUT THE ONLY WAY TO ELIMINATE THE NOISE AND DRAGGING EFFECTS WAS TO REPLACE THE TIRES. *AK (DOT NUMBER: ST3231 TIRESIZE: P215/70R14)

PE00020; FIRESTONE ATX TIRE TREAD SEPARATION: WHILE DRIVING ABOUT 45 MPH, TREAD ON REAR DRIVER'S SIDE TIRE CAME OFF. DRIVER WAS ABLE TO CONTROL VEHICLE, AND WAS NOT INJURED. TIRE SIZE P23575R14, ORIGINAL TIRE EQUIPMENT ON A 1997, NISSAN, PICKUP TRUCK. TIRE MILEAGE WAS 25,000. FIRESTONE WAS CONTACTED ABOUT THE TIRE. FIRESTONE CLAIMED NO RESPONSIBILITY. OWNER REPLACED ALL FOUR TIRES WITH TIRES MADE BY COOPER. *AK THERE WAS DAMAGE TO THE VEHICLE DUE TO TREAD SEPARATION. *SLC