Owner reports · Recalls · Investigations
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →Owner complaints by model year
Compare all 9400 years →Counts vary with age, sales and reporting. They are not failure rates.
No component reports in this snapshot.
Tap a category to read its complaints. One report may name several components.
Mileage at the reported incident
Limited mileage data: 0 of 0 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
NHTSA owner reports · September 18, 2026 snapshot.
No matching complaints in this snapshot.
Jul 15, 1999
VEHICLE DESCRIPTION: TRUCKS ASSEMBLED WITH SKF LEVEL 2 TRUCK HUB UNITS (THU) RECEIVED FROM MERITOR. THESE HUBS CAN FATIGUE CRACK.
Consequence: THIS FATIGUE CRACKING CAN RESULT IN WHEEL SEPARATION, INCREASING THE RISK OF A CRASH.
Remedy: DEALERS WILL REPLACE THESE HUBS WITH PRODUCTION LEVEL 3 HUBS.
Mar 15, 1999
VEHICLE DESCRIPTION: CLASS 8 HEAVY DUTY TRUCK CHASSIS EQUIPPED WITH 16,000 LB., 18,000 LB., OR 20,000 LB. HEAVY DUTY STEERING AXLES. THE INNER WHEEL BEARING CONE FOR THE STEERING AXLE WHEEL HUB ASSEMBLY DOES NOT PROPERLY FIT ONTO THE NAVISTAR STEERING AXLE SPINDLE ASSEMBLY. IMPROPER FIT OF THE BEARING TO THE SPINDLE INCREASES THE STRESS LEVELS TO THE STEERING AXLE SPINDLE WHICH COULD CAUSE SPINDLE FAILURE.
Consequence: IF THE SPINDLE FAILS, A LOSS OF DRIVER CONTROL COULD OCCUR, INCREASING THE RISK OF A VEHICLE CRASH.
Remedy: DEALERS WILL REMOVE THE LEFT AND RIGHT HUB/DRUM ASSEMBLIES FROM THE STEERING AXLES AND REPLACE THE INNER WHEEL BEARING CONES AND CUPS.
Nov 9, 1998
VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH SPICER SPL170 55MM CENTER BERING PACKAGE. THE END YOKE RETAINING NUT CAN LOOSEN.
Consequence: IF THIS CONDITION OCCURS, THE DRIVE LINE CAN VIBRATE AND SEPARATE FROM THE VEHICLE, CAUSING VEHICULAR DAMAGE, OR PERSONAL INJURY, OR BOTH.
Remedy: DEALERS WILL REMOVE THE 55MM CENTER BEARING PACKAGE AND COUPLER SHAFT, AND REPLACE IT WITH A NEW COUPLER SHAFT AND A 60MM CENTER BEARING PACKAGE. AN INTERIM REMEDY CAN BE IMPLEMENTED BY PLACING A SPOT WELD ON THE COUPLING SHAFT THREADS UNTIL PARTS ARE AVAILABLE.
May 27, 1998
VEHICLE DESCRIPTION: HEAVY DUTY TRUCKS EQUIPPED WITH PROSLEEPER BUNKS. A MICRO RELAY LOCATED BEHIND THE HVAC CONTROL PANEL IN THE BUNK CAN CORRODE FROM MOISTURE.
Consequence: THIS CONDITION CAN RESULT IN A SHORT CIRCUIT BETWEEN CONTACTS ON THE RELAY INCREASING THE RISK OF A VEHICLE FIRE.
Remedy: DEALERS WILL REMOVE THE EXISTING RELAY AND REPLACE IT WITH A SEALED RELAY.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
Opened Jun 8, 1999 · Closed Jan 25, 2002
Status: closed (inferred from source dates) · Visibility
No summary supplied.
Illustration