IllustrationPREVIOUSLY REPORTED SEVERE ROT AND RUST OF CHASSIS/FRAME. THIS 6 YR TRUCK IS ALREADY SHOWING ACCELERATED SIGNS OF SAME RUST ACTIVITY. LARGE BLISTERS 6-8" DIA PUSHING OUT FROM BENEATH PAINT AND UNDERCOATING. SUSPECT THAT THIS TRUCK WILL CONTINUE TO ROT AND BE UNUSABLE IN 3-5 YEARS. *JS
2005 Mitsubishi Fuso FE85D
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all FE85D years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 2 of 2 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Electrical System. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Engine And Engine Cooling. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Structure. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
0 crash reports0 fire reports0 injury reports
What owners actually said
2 reports2005 MITSUBISHI FE180 WENT IN SERVICE SEPTEMBER 20, 2006 AND WE ALSO PURCHASED THE EXTENDED POWERTRAIN COVERAGE, PTO300. ON NOVEMBER 30, 2006 THE TRUCK WAS EXPERIENCING A SKIP IN THE MOTOR, ALSO THE CHECK ENGINE LIGHT HAD COME ON AND THE TRUCK HAD LOST POWER. ACCORDING TO THE DEALER THE PROBLEM WAS A LOOSE CONNECTION AT THE ECM …
Read full complaint
2005 MITSUBISHI FE180 WENT IN SERVICE SEPTEMBER 20, 2006 AND WE ALSO PURCHASED THE EXTENDED POWERTRAIN COVERAGE, PTO300. ON NOVEMBER 30, 2006 THE TRUCK WAS EXPERIENCING A SKIP IN THE MOTOR, ALSO THE CHECK ENGINE LIGHT HAD COME ON AND THE TRUCK HAD LOST POWER. ACCORDING TO THE DEALER THE PROBLEM WAS A LOOSE CONNECTION AT THE ECM FOR INJECTOR #4. THIS WAS TIGHTENED AND THE TRUCK WAS RETURNED TO US. THIS SAME THING HAPPENED A WEEK LATER, AGAIN IT WAS TIGHTENED AND RETURNED TO US. SOMEWHERE AROUND THE END OF JUNE 2010 THIS TRUCK AGAIN STARTED SKIPPING, THE CHECK ENGINE LIGHT CAME ON AND IT LOST POWER. DEALER CAME TO OUR SHOP TO PUT THE TRUCK ON THE COMPUTER AT A COST OF $95.00. DEALER SAID THAT TWO INJECTORS WERE NOT WORKING, ONE WAS WEAK AND ONE WAS OPERATING IN NORMAL PARAMETERS. AT DEALERS RECOMMENDATION I HAD THEM REPLACE ALL FOUR INJECTORS, AT A COST OF $3269.97. THE FIRST DAY WE DROVE THE TRUCK IT WAS EXPERIENCING THE SAME PROBLEM. THE DEALER CAME OUT TO THE TRUCK'S LOCATION AND TIGHTENED THE HARNESS/ECU CONNECTION. THIS TIME THE HARNESS AT THE ECU FOR THE INJECTORS WAS BURNT. AFTER CONTACTING THE MITSUBISHI DISTRICT REPRESENTATIVE, I WAS TOLD THAT THE INJECTOR WIRE ARCHED AND AT THIS TIME MITSUBISHI FUSO AGREED TO REPLACE THE WIRING HARNESS AND WE PAID THE LABOR AT A COST OF $625.00. SINCE THEN THIS PROBLEM WITH THE TRUCK SKIPPING, CHECK ENGINE LIGHT COMING ON AND LOSS OF POWER HAS OCCURRED TWO MORE TIMES. WE HAVE ISOLATED THE HARNESS CONNECTION AT THE ECU FOR THE INJECTORS HAD LOOSENED. THIS IS CAUSING MAJOR DOWN INJECTORS HAD LOOSENED. IT IS MY OPINION THAT ALL OF THESE PROBLEMS AND EXPENSES COME DOWN TO THE ECU CONNECTION. I PURCHASED INJECTORS THAT I DID NOT NEED. THE ECU SHOULD HAVE BEEN REPLACED IN JUNE 2010. THE ORIGINAL DIAGNOSIS AND PROBLEM IN NOVEMBER 2006 TURNED OUT WAS STILL THE PROBLEM IN 2010 AND TODAY. *TR
Official recalls
618V047000 · Equipment
Jan 11, 2018
Mitsubishi Fuso Truck of America, Inc. (MFTA) is recalling certain 2004-2017 FE84D, FE85D, FEC52, FEC72, FEC92, FGB72, FK61F and FM657 trucks. These trucks are equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers that may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf
Consequence & remedy
Consequence: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.
Remedy: MFTA will notify owners, instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began on January 11, 2018. Owners may contact MFTA customer service at 1-877-711-0707, or Kidde customer service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. MFTA's number for this recall is MFV00001.
12V545000 · Fuel System, Other:delivery:hoses, Lines/piping, And Fittings
Nov 23, 2012
Mitsubishi Fuso Truck of America (MFTA) is recalling certain model year 2005-2007 FE83D, FE84D, FE85D, and FG84D trucks; manufactured from May 27, 2004, through May 14, 2007. The fuel pipes may crack due to an improper manufacturing process. Additionally, the fuel pipe flare nuts may have been insufficiently tightened.
Consequence & remedy
Consequence: Cracked fuel pipes or loose fuel pipe flare nuts may leak fuel. A fuel leak in the presence of an ignition source may result in a vehicle fire.
Remedy: MFTA will notify owners, and dealers will inspect the fuel pipes and tighten or replace them as needed, free of charge. The safety recall began on January 21, 2013. Owners may contact MFTA at 1-856-467-4500.
09V449000 · Equipment
Nov 19, 2009
MITSUBISHI FUSO IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2010 FE83D, FE84D, FE85D AND FG84D VEHICLES. THE WEATHER RESISTANCE PROPERTIES OF THE AIR INTAKE DUCT RUBBER CUSHIONS IS INSUFFICIENT. DURING NORMAL VEHICLE OPERATION, THE RUBBER CUSHIONS DETERIORATE AND CRACK, CAUSING ABNORMAL NOISE.
Consequence & remedy
Consequence: ALL OF THE RUBBER CUSHIONS COULD CRACK, ALLOWING THE AIR INTAKE DUCT TO FALL OFF OF THE TRUCK INCREASING THE RISK OF CRASH.
Remedy: DEALERS WILL REPLACE ALL OF THE AIR INTAKE DUCT RUBBER CUSHIONS WITH COMPONENTS MANUFACTURED TO PROPER SPECIFICATIONS. THIS REMEDY WILL BE PERFORMED FREE OF CHARGE. THE SAFETY RECALL BEGAN ON FEBRUARY 19, 2010. OWNERS MAY CONTACT MITSUBISHI FUSO AT 1-856-467-4500.
07V229000 · Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings
Jun 4, 2007
ON CERTAIN MEDIUM DUTY TRUCKS, THE BRAKE VACUUM HOSE MAY HAVE BEEN MANUFACTURED WITH INSUFFICIENT WALL THICKNESS ALLOWING THE HOSE TO COLLAPSE DURING NORMAL VEHICLE OPERATION.
Consequence & remedy
Consequence: CONTINUED OPERATION OF THIS VEHICLE IN THIS CONDITION COULD (1) WITH RESPECT TO THE FE83D FE84D, AND FG84D MODELS, RESTRICT PROPER OPERATION OF THE BRAKE POWER-ASSIST AND COMPROMISE BRAKING PERFORMANCE; AND (2) WITH RESPECT TO THE FE85D MODEL, RESTRICT PROPER OPERATION OF THE EXHAUST BRAKE SYSTEM. EITHER OCCURRENCE COULD LEAD TO COMPROMISED BRAKING PERFORMANCE AND INCREASED BRAKING DISTANCES, WHICH COULD CAUSE A CRASH WITHOUT WARNING.
Remedy: DEALERS WILL REPLACE THE BRAKE VACUUM HOSE WITH A HOSE MANUFACTURED WITH WALLS OF PROPER THICKNESS. THE RECALL BEGAN ON AUGUST 20, 2007. OWNERS MAY CONTACT MITSUBISHI FUSO AT 1-856-467-3917.
07V138000 · Engine And Engine Cooling
Mar 26, 2007
ON CERTAIN TRUCKS, THE CYLINDER HEAD IDLER GEAR BUSHING MAY HAVE BEEN IMPROPERLY MACHINED, CAUSING EXCESSIVE STRESS ON THE CYLINDER HEAD IDLER GEAR SHAFT. CONTINUED OPERATING IN THIS CONDITION COULD CAUSE THE IDLER GEAR SHAFT FLANGE TO BREAK AND GENERATE ABNORMAL ENGINE NOISE OR ENGINE OIL LEAKS.
Consequence & remedy
Consequence: THE ENGINE COULD STALL AND WOULD NOT RESTART INCREASING THE RISK OF A CRASH.
Remedy: ON VEHICLES WITH LESS THAN 15,000 MILES, IF THE IDLER GEAR AND BUSHING ASSEMBLY, IDLER GEAR SHAFT AND BOLT WILL BE REPLACED. IF THE MILEAGE IS MORE THAN 15,000 MILES, THE INSIDE DIAMETER OF THE IDLER GEAR BUSHING WILL BE MEASURED AND IF THE BUSHING MEASURES MORE THAN 32.043MM (1.262"), THE IDLER GEAR AND BUSHING ASSEMBLY, IDLER GEAR SHAFT AND BOLT WILL BE REPLACED. THE RECALL BEGAN ON AUGUST 13, 2007. OWNERS MAY CONTACT MITSUBISHI FUSO AT 1-856-467-4500.
05V410000 · Exterior Lighting:turn Signal
Sep 15, 2005
ON CERTAIN TRUCKS, THE DOOR WIRING HARNESS INTERFERES WITH THE TURN SIGNAL AND HAZARD LAMP WIRING HARNESS DUE TO IMPROPER ROUTING.
Consequence & remedy
Consequence: REPEATED OPENING AND CLOSING OF THE DOORS COULD BREAK THE TURN SIGNAL AND HAZARD LAMP WIRING HARNESS, CAUSING THE LAMPS TO BECOME INOPERATIVE.
Remedy: DEALERS WILL ADD PROTECTIVE TUBING AT THE DOOR WIRING HARNESS GROMMET, INSTALL A PROTECTIVE CAP ON THE TURN SIGNAL AND HAZARD LAMP CONNECTOR AND REPAIR ANY WIRING HARNESS DAMAGE. THE RECALL BEGAN ON NOVEMBER 23, 2005. OWNERS MAY CONTACT MITSUBISHI FUSO AT 1-856-467-4500.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0No exact-year investigations in this snapshot.