IllustrationWHILE TRAVELING AND WITHOUT ANY INDICATION VEHICLE WOULD STALL. DEALER HAS REPLACED IGNITION MODULE FOUR TIMES. *AK DEALER REPLLACED IGNITION MODULE FOUR TIMES A T THE OWNER'S EXPENCE. *YH
1984 Mercury Lynx
Owner reports · Recalls · Investigations
Limited comparison data
There is not enough comparable history to draw a useful model-year comparison.
About this comparison →How this year compares
Owner complaints by model year
Compare all Lynx years →Counts vary with age, sales and reporting. They are not failure rates.
What owners reported most
Tap a category to read its complaints. One report may name several components.
When problems were reported
Mileage at the reported incident
Limited mileage data: 0 of 3 reports include usable mileage. There isn’t enough coverage to show a useful chart.
NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.
What to inspect
Issues worth paying extra attention to based on owner reports.
- Engine And Engine Cooling. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
- Electrical System. Review the 1 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
NHTSA owner reports · September 18, 2026 snapshot.
0 crash reports2 fire reports0 injury reports
What owners actually said
3 reportsVEHICLE FIRE.
ALUMINUM CYLINDER HEAD GASKETS CRACKED AND LEAKED OIL ONTO EXHAUST MANIFOLD INVOLVED IN RECALL NO. 89V095000. TT
Official recalls
389V095000 · Engine And Engine Cooling:engine
Jun 12, 1989
EXTERNAL CRACKS ABOVE THE NUMBER 3 CYLINDER (1984 MODELS) OR ROCKER ARM COVER GASKETS SPLITTING (1985 MODELS) COULD ALLOW OIL TO LEAK ONTO THE EXHAUST MANIFOLD.
Consequence & remedy
Consequence: ENGINE OIL LEAKING ONTO A HOT EXHAUST MANIFOLD COULDRESULT IN AN ENGINE COMPARTMENT FIRE.
Remedy: REPLACE CRACKED CYLINDER HEADS (1984 MODELS); REPLACE ROCKER ARM COVER GASKETS (1985 MODELS).
84V123000 · Service Brakes, Hydraulic:foundation Components:hoses, Lines/piping, And Fittings
Oct 10, 1984
THE BRAKE LINE MAY BE POSITIONED TOO CLOSE TO AN ENGINE BRACKET. NORMAL ENGINE MOVEMENTS MAY CAUSE THE BRACKET TO RUB AGAINST THE BRAKE LINE.
Consequence & remedy
Consequence: Not supplied
Remedy: THE BRAKE LINE WILL BE INSPECTED AND REROUTED IF NECESSARY.
83V134000 · Seat Belts:front:anchorage
Dec 20, 1983
THE BOLTS THAT ATTACH THE D-SHAPED RING FOR THE SHOULDER BELT ARE INADEQUATELY SUPPORTED BY THE MATERIAL IN WHICH THEY ARE MOUNTED. THE ATTACHMENT DOES NOT COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES".
Consequence & remedy
Consequence: Not supplied
Remedy: DEALERS WILL INSTALL NEW ATTACHING HARDWARE TO IMPROVE THE STRENGTH OF THE MOUNTING.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
5EA88038 · Rear Safety Belt Fit
Opened Aug 29, 1988 · Closed May 11, 1990
Status: closed (inferred from source dates) · Seat Belts:rear/other
===
DP88007 · Rear Seat Belt Compliance
Opened Jan 11, 1988 · Closed Aug 24, 1988
Status: closed (inferred from source dates) · Seat Belts:rear/other
REAR SEAT BELT COMPLIANCE
PE87028 · Stalling
Opened May 1, 1987 · Closed Jan 21, 1988
Status: closed (inferred from source dates) · Electrical System
NO SAFETY DEFECT TREND HAS BEEN DETECTED.===
EA87005 · Fires
Opened Dec 1, 1986 · Closed Oct 31, 1989
Status: closed (inferred from source dates) · Engine And Engine Cooling
SUMMARY OF INFORMATION FROM MANUFACTURER:THE ALLEGED FIRES RESULT FROMA VARIETY OF CAUSES.FIRE RATE REMAINS ABOUT THE SAME DESPITE MAJORCHANGES WITH 85-1/2 MODELS.IT BELIEVES THAT THE FIRE RATE IS LESS THANINDUSTRY AVERAGE.MFGR REQUEST COPIES OF SPECIFIC FIRE REPORTS FOR TRENDANALYSIS.ANALYSIS:SEVERAL AREAS OF FIRE ORIGIN ARE MENTIONED.ENGINE FIRESALLEGEDLY CAUSED BY LEAKAGE OF FLAMMABLE FLUIDS (OIL, GAS, TRANS FLUID).CATALYTIC CONVERTERS FREQUENTLY CITED AS OVERHEATING.CERTAIN MODELSARE REPORTED AT A GREATER FREQUENCY.EXP TURBO REPORTED MOST OFTEN ON APER UNIT BASIS.STATUS: IR SENT 2/19/88. AWAITING RESPONSE.===
EA86010 · Seatback Failure
Opened Mar 26, 1986 · Closed Jul 28, 1989
Status: closed (inferred from source dates) · Seats
SUMMARY OF INFORMATION FROM MANUFACTURER:FORD BELIEVES THAT THE AL-LEGED DEFECT ONLY OCCURS IN A SMALL NUMBER OF THE SUBJECT VEHICLES ANDRECALLED ABOUT 195,732 1984 TEMPO/TOPAZ VEHICLES IN JUNE 1986.ANALYSIS: VEHICLES POTENTIALLY INVOLVED INCLUDE TEMPO/TOPAZ, ESCORT/LYNX/EXP, MUSTANG/CAPRI, LTD/MARQUIS, AND THUNDERBIRD/COUGAR.FORD SOLD ABOUT 110,000 REPLACEMENT MIO BOLTS, MAINLY FOR 1983 AND 1984MODELS. LOW CLAMPING FORCE APPEARS TO BE A LARGE PART OF THE PROBLEM.FORD INCREASED THE TORQUE REQUIREMENTS AND REQUIRED THE USE OF A MANUALTORQUE TOOL IN MARCH AND SEPTEMBER 1985 PRODUCTION CHANGES. 1987 MODELSWILL BE PRODUCED WITH A LONGER M10 BOLT AND A NUT TO INCREASE AND MAIN-TAIN CLAMPING FORCE. BOLTS WERE FORMERLY SELF TAPPING. REPORTS LISTEDABOVE SPECIFICALLY STATE THAT THE BOLT BROKE. NONE REFER SIMPLY TOSEAT BACK COLLAPSE ALONE.STATUS:FORD REPLY TO ODI IR DATED 2/2/87.FORD RECALLED 195,7321984 TEMPO/TOPAZ VEHICLES IN JUNE 1986 (86V-082). ANALYZING REPONSE,MONITORING CANADIAN PROGRESS. RESPONSE TO 4/6/87 LETTER TO FORDRECEIVED 7/15/87. WILL PROBABLY CLOSE AFTER CANADA COMPLETES THEIRACTIONS.===