The vehicle was delivered to the dealer on July 13, 2026 at 33,360 miles with an illuminated check engine light. The dealer diagnosed intake camshaft timing faults and found pieces of the central valve screen in the engine oil filter. The camshaft bearing housing was replaced and the repair declared complete on July 15, but the …
Read full complaint
The vehicle was delivered to the dealer on July 13, 2026 at 33,360 miles with an illuminated check engine light. The dealer diagnosed intake camshaft timing faults and found pieces of the central valve screen in the engine oil filter. The camshaft bearing housing was replaced and the repair declared complete on July 15, but the check engine light returned the next day. On August 19 the dealer removed the cylinder head and found an internal oil passage that was restricted and clogged, which they stated may have caused insufficient oil flow and contributed to the camshaft timing failure. On August 24, Mercedes-Benz Engineering directed replacement of the complete engine. No replacement engine is available in the United States; one must be shipped from Germany, with a tentative arrival of October 19, 2026. The vehicle has been out of service since July 13, 2026 and is expected to remain out of service about four months. The engine is an M264 2.0L turbocharged four-cylinder. Similar cylinder head and camshaft failures have been reported by other owners of this engine at comparable mileage.
NHTSA ODI #11761182
Mileage unknown · Sep 1, 2026
Engine
The vehicle was delivered to the dealer on XXX at 33,360 miles with an illuminated check engine light. The dealer diagnosed intake camshaft timing faults and found pieces of the central valve screen in the engine oil filter. The camshaft bearing housing was replaced and the repair was declared complete on XXX but the check engin…
Read full complaint
The vehicle was delivered to the dealer on XXX at 33,360 miles with an illuminated check engine light. The dealer diagnosed intake camshaft timing faults and found pieces of the central valve screen in the engine oil filter. The camshaft bearing housing was replaced and the repair was declared complete on XXX but the check engine light returned the next day. After extended diagnosis involving Mercedes-Benz Engineering and a Field Service Engineer, the dealer removed the cylinder head on XXX and found an internal oil passage that was restricted and clogged. The dealer stated this may have caused insufficient oil flow and contributed to the camshaft timing failure. On XXX, Mercedes-Benz Engineering directed replacement of the complete engine. The dealer advised that no replacement engine is available in the [XXX] and one must be shipped from [XXX], with a tentative arrival of XXX. The vehicle has been out of service since XXX and is expected to remain out of service for approximately four months. The engine is an M264 2.0L turbocharged four-cylinder. Similar cylinder head and camshaft failures have been reported by other owners of this engine at comparable mileage. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
NHTSA ODI #11761181
Mileage unknown · Mar 1, 2026
EngineVehicle Speed Control
On multiple occasions, the vehicle has unexpectedly lost acceleration while driving. Specifically, while traveling on the highway, the vehicle will suddenly drop speed and fail to respond when pressing the accelerator. This creates a dangerous situation, as I am unable to maintain speed with surrounding traffic, increasing the …
Read full complaint
On multiple occasions, the vehicle has unexpectedly lost acceleration while driving. Specifically, while traveling on the highway, the vehicle will suddenly drop speed and fail to respond when pressing the accelerator. This creates a dangerous situation, as I am unable to maintain speed with surrounding traffic, increasing the risk of a collision. This issue appears to occur without warning and significantly impacts the safe operation of the vehicle. A sudden loss of power on a high-speed roadway is extremely hazardous and poses a risk to both myself and other drivers.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2024 GLE 350 4MATIC, 2025 GLE 450e 4MATIC, GLE 450 4MATIC Coupe, GLE 450 4MATIC, GLS 450 4MATIC, Maybach GLS 600 4MATIC, AMG GLE 53 4MATIC, AMG GLE 53 4MATIC Coupe, AMG GLE 63 S 4MATIC Coupe, and AMG GLS 63 4MATIC vehicles. The multi-purpose camera and the rearview mirror may be insufficiently attached to the windshield and may detach.
Consequence & remedy
Consequence: A detached mirror can reduce visibility for the driver. A detached camera can cause a loss of certain driving assistance systems, such as Active Lane Keeping Assist and Active Brake Assist. Either of these situations can increase the risk of a crash.
Remedy: Dealers will replace the windshield and reinstall the multi-purpose camera and rearview mirror, free of charge. Owner notification letters were mailed June 27, 2025. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2025060001.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
0
No exact-year investigations in this snapshot.
2024 MERCEDES-BENZ Gle 350 4MATIC Problems, Complaints & Recalls | Skip That Year