NHTSA owner reports · September 18, 2026 snapshot.
What owners actually said
133 reportsMileage unknown · Aug 21, 2026
Wheels
On XXX, my 2016 Mercedes-Benz GLC 300 was serviced at a Mercedes-Benz dealership for a B Service, including replacement of the rear brake pads and sensor. The rear wheel had to be removed to perform this work. On XXX, approximately 7 days later, my wife was driving the vehicle with our [XXX] son and his friend as passengers whe…
Read full complaint
On XXX, my 2016 Mercedes-Benz GLC 300 was serviced at a Mercedes-Benz dealership for a B Service, including replacement of the rear brake pads and sensor. The rear wheel had to be removed to perform this work. On XXX, approximately 7 days later, my wife was driving the vehicle with our [XXX] son and his friend as passengers when the LEFT REAR WHEEL COMPLETELY SEPARATED from the vehicle while in motion on a public road. A truck was approaching from behind. The family narrowly avoided a serious collision. Police responded to the scene and an officer directed traffic while the vehicle was towed. The lug bolts were recovered from the roadway. The dealership's General Manager later asked me to return the lug bolts, which I did. The vehicle required repair of the wheel and hub assembly at a collision center. I was given no written explanation of why the wheel separated. Separately, after the XXX service I noticed a transmission problem that was not present before. On XXX it became dangerous: coming out of stops at traffic lights and stop signs, the transmission would slip into Neutral instead of engaging Drive, and after several attempts would drop directly into third gear with a hard jerk. This creates a serious risk of being unable to accelerate away from a stop in traffic. I documented this on video and provided it to the dealership. No injuries have occurred, but both incidents were near-misses with a high risk of a crash or injury. I am reporting this so the potential defect and the quality of the safety-related service are on record. I have photographs and video from the wheel-separation scene, the transmission video, the service records, and related documentation available on request. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
NHTSA ODI #11758634
Mileage unknown · Jun 30, 2026
Structure
Was driving down the highway a the panel between the windshield and panoramic sunroof detached a flew off. Other models are included in this same recall but my make and model are not
NHTSA ODI #11747561
Mileage unknown · May 4, 2026
Steering
The steering tilt motor is stripped and will not move up or down and is stuck in the full "UP" position. Unable to adjust for the driving position.
NHTSA ODI #11735596
Mileage unknown · Oct 29, 2025
Electrical SystemUnknown Or Other
SUNROOF will not closed , refuse to close on my car
NHTSA ODI #11696259
60,814 miles · Oct 17, 2025
Fuel System, Gasoline
The contact owns a 2016 Mercedes-Benz GLC300. The contact stated that while receiving routine maintenance, the mechanic noticed a fuel odor coming from the vehicle. The mechanic determined that the fuel injectors had failed and that the fuel rail needed to be replaced. The mechanic provided the contact with information related t…
Read full complaint
The contact owns a 2016 Mercedes-Benz GLC300. The contact stated that while receiving routine maintenance, the mechanic noticed a fuel odor coming from the vehicle. The mechanic determined that the fuel injectors had failed and that the fuel rail needed to be replaced. The mechanic provided the contact with information related to NHTSA Campaign Number: 21V961000 (Fuel System, Gasoline); for the fuel rails and fuel injectors. The mechanic referred the contact to the dealer for assistance. The dealer was informed of the failure and confirmed that the VIN was not included in the recall. The vehicle was not repaired. The manufacturer was informed of the failure and confirmed that the VIN was not included in the recall. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was 60,814.
NHTSA ODI #11694113
Mileage unknown · Sep 20, 2025
Fuel/propulsion System
Mercedes-Benz USA (MBUSA) To whom It May Concern, Complaint through your dealer, regional MB and state AG. Going through MBUSA is a waste of time. You would be better off going to Sears and buying a shiny new hammer and banging your head every hour on the hour. A little over a year ago, I Purchase a previously owned 2016 GLC300 …
Read full complaint
Mercedes-Benz USA (MBUSA) To whom It May Concern, Complaint through your dealer, regional MB and state AG. Going through MBUSA is a waste of time. You would be better off going to Sears and buying a shiny new hammer and banging your head every hour on the hour. A little over a year ago, I Purchase a previously owned 2016 GLC300 from a local DGDG dealership in San Jose CA. for the past few month, I started experiencing a heavy fuel odor generated from the fuel rail and fuel injectors. I initiated a leak detection to verify the above-mentioned defect. I became aware the Mercedes Benz has a major issue with the fuel rail and fuel injectors that caused a safety & emission recall campaign 2022030003 that is launched to replace the fuel rail and fuel injectors on 139 Model Year 2016-2020 that included my car GLC-class vehicle. To my surprise my car VIN number was not listed and flagged in this campaign. According to the campaign issue, a leak may develop between the fuel line and the fuel injectors due to trapped debris from the production process, which could affect the safety and emissions of the vehicle. according to the documents of the campaign, trapped debris might damage the seal between the fuel rail and fuel injectors, which over the life of the vehicle, might result in a fuel leak into the engine compartment. I informed Mercedes Bens that my vehicle fuel rail line and fuel injectors have shown to have a safety manufacture failure. Leaking fuel from this area might contact hot parts of the engine and therefore the risk of fire cannot be ruled out. It seems that the fuel pressure deviation has exceeded the thresholds because the fuel odor is perceptible to me. I had an appointment with Mercedes Benz of Stevens Creek, and they established that my vehicle VIN number was not affected by the recall even though the defects exist on my vehicle. I reached out to Mercedes Benz USA, LLC and filed case # [XXX] but they elected not to take responsibility to repair my ca INFORMATION REDACTED PURSUANT TO THE FREEDOM OF I
NHTSA ODI #11688647
Mileage unknown · May 6, 2025
Engine And Engine Cooling
Fuel Rail and fuel injectors Leak contacted Mercedes cooperate to investigate why my car. VIN did not list according to campaign no 2022030003 to replace the fuel Ra and fuel injectors and a Ssfety & Emissios recall campaign that covers 139 Model year 2016-2030 that include my vehicle CLC-Class. My car is experiencing fuel injec…
Read full complaint
Fuel Rail and fuel injectors Leak contacted Mercedes cooperate to investigate why my car. VIN did not list according to campaign no 2022030003 to replace the fuel Ra and fuel injectors and a Ssfety & Emissios recall campaign that covers 139 Model year 2016-2030 that include my vehicle CLC-Class. My car is experiencing fuel injectors defects but my VIN number was not flagged
NHTSA ODI #11659257
Mileage unknown · Jan 13, 2025
Engine And Engine CoolingPower Train
The contact owns a 2016 Mercedes-Benz GLC300. The contact stated while driving at an undisclosed speed, the check engine warning illuminated. The contact stated that the vehicle was taken to the Emissions Center, and the vehicle failed the Emissions test. The vehicle was taken to the dealer to be diagnosed. The dealer retrieved …
Read full complaint
The contact owns a 2016 Mercedes-Benz GLC300. The contact stated while driving at an undisclosed speed, the check engine warning illuminated. The contact stated that the vehicle was taken to the Emissions Center, and the vehicle failed the Emissions test. The vehicle was taken to the dealer to be diagnosed. The dealer retrieved DTC: P052E (PCM has detected an inappropriate degree of pressure from the crankcase pressure sensor). The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was unknown.
NHTSA ODI #11635618
90,000 miles · Oct 3, 2024
Engine
The contact owns a 2016 Mercedes-Benz GLC300. The contact stated that while driving 45-50 MPH, the engine experienced rough idling and the vehicle was shaking violently. Several unknown warning lights were illuminated. The contact pulled over and turned off the vehicle. The vehicle was towed to an independent mechanic, who deter…
Read full complaint
The contact owns a 2016 Mercedes-Benz GLC300. The contact stated that while driving 45-50 MPH, the engine experienced rough idling and the vehicle was shaking violently. Several unknown warning lights were illuminated. The contact pulled over and turned off the vehicle. The vehicle was towed to an independent mechanic, who determined that cylinder #1 had a cracked piston and the engine needed to be replaced. The vehicle was then towed to another independent mechanic, who also determined that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure, but no assistance was provided. The failure mileage was approximately 90,000.
NHTSA ODI #11617878
Mileage unknown · Sep 14, 2024
Engine
PVC valve indicator engine light keeps appearing after being replaced twice
NHTSA ODI #11614600
Official recalls
12Dec 15, 2023
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2014-2020 C-Class, CLA, GLA, S-Class, GLC, and GLE vehicles. Please refer to MBUSA's recall report for specific vehicle details. The front roof panel located between the windshield and the panoramic sunroof may not have been bonded correctly to the vehicle during a prior repair, allowing the front panel to detach from the vehicle.
Consequence & remedy
Consequence: A detached roof panel can become a road hazard, increasing the risk of a crash.
Remedy: Dealers will replace the front panel, free of charge. Owner notification letters were mailed on August 2, 2024. Owner notification letters will be mailed in phases, on, March 22,2024, and August 2, 2024. Owners may contact MBUSA customer service at 1-800-367-6372. This recall is an expansion of NHTSA recall number 21V-197.
Mar 19, 2021
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2017-2020 C300 Coupe, C43 Coupe AMG, C43 AMG, 2015-2020 C300, GLA250, 2016-2018 C350e, CLA45 Coupe AMG, 2015 C400, S65 AMG, 2015-2019 C63 AMG, 2016 C450, 2015-2016 GLA45 AMG, S600, 2016-2020 GLC300, 2017-2019 GLC43 AMG, GLE43 Coupe AMG, 2014-2019 CLA250 Coupe, 2014-2015 CLA45 AMG, 2018 GLC63 AMG, 2014-2017 S550, 2018-2020 S450, 2016-2019 GLE63 Coupe AMG, 2016 GLE450 Coupe, 2014-2020 S63 AMG, 2018-2019 S560, and 2019 GLC350e vehicles equipped with a panoramic sunroof. The front roof panel located between the windshield and the panoramic sunroof may not have been bonded correctly to the vehicle during a prior repair.
Consequence & remedy
Consequence: The adhesive bonding of the front panel might deteriorate, possibly causing the front panel to detach from the vehicle and become a road hazard, increasing the risk of a crash.
Remedy: Mercedes-Benz dealer will remove the bonded panel and will install a new front panel by following the detailed repair instructions and using the approved primer, cleaner and adhesive, free of charge. Owner notification letters were mailed on September 3, 2021 and October 26, 2021. Owners may contact MBUSA customer service at 1-800-367-6372.
Feb 5, 2021
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 - 2021 CLA-Class, GLA-Class, GLE-Class, GLS-Class, SLC-Class, A-Class, GT-Class, C-Class, E-Class, S-Class, CLS-Class, SL-Class, B-Class, GLB-Class, GLC-Class, and G-Class vehicles. Please refer to the Part 573 report for specific vehicle model details. The software design of the communication module may fail to communicate the correct vehicle location for the emergency call system (eCall) in the event of a crash.
Consequence & remedy
Consequence: Failure of the eCall system may result in emergency responders being dispatched to the wrong location, increasing the risk of injury following a crash.
Remedy: MBUSA will notify owners, and the communication module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. The recall began March 12, 2021. Owners may contact MBUSA customer service at 1-877-762-8267. MBUSA's number for this recall is 2021020025.
Additional source detail variants (2)
Communication: Auto Crash Notification
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 - 2021 CLA-Class, GLA-Class, GLE-Class, GLS-Class, SLC-Class, A-Class, GT-Class, C-Class, E-Class, S-Class, CLS-Class, SL-Class, B-Class, GLB-Class, GLC-Class, and G-Class vehicles. Please refer to the Part 573 report for specific vehicle model details. The software design of the communication module may fail to communicate the correct vehicle location for the emergency call system (eCall) in the event of a crash.
Consequence: Failure of the eCall system may result in emergency responders being dispatched to the wrong location, increasing the risk of injury following a crash.
Remedy: MBUSA will notify owners, and the communication module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. The recall began March 12, 2021. Owners may contact MBUSA customer service at 1-877-762-8267. MBUSA's number for this recall is 2021020025.
Electrical System:software
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 - 2021 CLA-Class, GLA-Class, GLE-Class, GLS-Class, SLC-Class, A-Class, GT-Class, C-Class, E-Class, S-Class, CLS-Class, SL-Class, B-Class, GLB-Class, GLC-Class, and G-Class vehicles. Please refer to the Part 573 report for specific vehicle model details. The software design of the communication module may fail to communicate the correct vehicle location for the emergency call system (eCall) in the event of a crash.
Consequence: Failure of the eCall system may result in emergency responders being dispatched to the wrong location, increasing the risk of injury following a crash.
Remedy: MBUSA will notify owners, and the communication module software will be updated by a dealer, or through an over-the-air (OTA) update, free of charge. The recall began March 12, 2021. Owners may contact MBUSA customer service at 1-877-762-8267. MBUSA's number for this recall is 2021020025.
Nov 1, 2019
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2013-2017 vehicles due to a software fault that may cause the date and time for the emergency call system (eCall) to differ from the actual date and time, potentially relaying an inaccurate vehicle location. For a full list of the affected models visit: https://static.nhtsa.gov/odi/rcl/2019/RMISC-19V787-4620.pdf
Consequence & remedy
Consequence: An inaccurate vehicle location may delay emergency responders, increasing the risk of injury.
Remedy: MBUSA has initiated an Over the Air (OTA) remote update. MBUSA will also notify owners, and dealers will check software for a successful OTA or update the communication module software as needed, free of charge. The recall began December 23, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2019120008.
Oct 1, 2018
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2016-2018 Mercedes-Benz GLC300 and GLC300 4Matic, 2018 GLC350e and GLC63 AMG 4Matic and 2017-2018 GLC43 AMG 4Matic vehicles. The seat belt latch plates (the parts that insert into the buckles) for the outboard rear seats may retract into the interior paneling, preventing the occupants from being able to use the seat belts.
Consequence & remedy
Consequence: If the rear seat passengers cannot fasten their seat belts, they have an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will install felt strips between the C-pillar and rear side paneling, free of charge. The recall began November 2, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018100002.
Additional source detail variants (2)
Seat Belts: Rear/other:buckle Assembly
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2016-2018 Mercedes-Benz GLC300 and GLC300 4Matic, 2018 GLC350e and GLC63 AMG 4Matic and 2017-2018 GLC43 AMG 4Matic vehicles. The seat belt latch plates (the parts that insert into the buckles) for the outboard rear seats may retract into the interior paneling, preventing the occupants from being able to use the seat belts.
Consequence: If the rear seat passengers cannot fasten their seat belts, they have an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will install felt strips between the C-pillar and rear side paneling, free of charge. The recall began November 2, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018100002.
Structure:body:roof And Pillars
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2016-2018 Mercedes-Benz GLC300 and GLC300 4Matic, 2018 GLC350e and GLC63 AMG 4Matic and 2017-2018 GLC43 AMG 4Matic vehicles. The seat belt latch plates (the parts that insert into the buckles) for the outboard rear seats may retract into the interior paneling, preventing the occupants from being able to use the seat belts.
Consequence: If the rear seat passengers cannot fasten their seat belts, they have an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will install felt strips between the C-pillar and rear side paneling, free of charge. The recall began November 2, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018100002.
Mar 15, 2018
Mercedes Benz USA LLC (MBUSA) is recalling certain 2017-2018 GLC43 AMG, 2016-2018 GLC300 4Matic, 2016-2018 GLC300, 2018 GLC63 AMG 4Matic, and 2018 GLC350e 4Matic vehicles. The seat belt latch plates (the parts that insert into the buckles) for the outboard rear seats may retract into the interior paneling, preventing the occupants from being able to use the seat belts.
Consequence & remedy
Consequence: If the rear seat passengers cannot fasten their seat belts, they have an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will install a buffer to the c-pillar paneling, free of charge. The recall is expected to begin May 14, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018030012.
Additional source detail variants (2)
Seat Belts: Rear/other:buckle Assembly
Mercedes Benz USA LLC (MBUSA) is recalling certain 2017-2018 GLC43 AMG, 2016-2018 GLC300 4Matic, 2016-2018 GLC300, 2018 GLC63 AMG 4Matic, and 2018 GLC350e 4Matic vehicles. The seat belt latch plates (the parts that insert into the buckles) for the outboard rear seats may retract into the interior paneling, preventing the occupants from being able to use the seat belts.
Consequence: If the rear seat passengers cannot fasten their seat belts, they have an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will install a buffer to the c-pillar paneling, free of charge. The recall is expected to begin May 14, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018030012.
Structure:body:roof And Pillars
Mercedes Benz USA LLC (MBUSA) is recalling certain 2017-2018 GLC43 AMG, 2016-2018 GLC300 4Matic, 2016-2018 GLC300, 2018 GLC63 AMG 4Matic, and 2018 GLC350e 4Matic vehicles. The seat belt latch plates (the parts that insert into the buckles) for the outboard rear seats may retract into the interior paneling, preventing the occupants from being able to use the seat belts.
Consequence: If the rear seat passengers cannot fasten their seat belts, they have an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will install a buffer to the c-pillar paneling, free of charge. The recall is expected to begin May 14, 2018. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2018030012.
Dec 18, 2017
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016-2017 GLC300, GLC300 4MATIC and GLC43 4MATIC vehicles. These vehicles may have misadjusted headlights, possibly resulting in the low beam headlights insufficiently illuminating the roadway. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence & remedy
Consequence: An insufficiently illuminated roadway may increase the risk of a crash.
Remedy: MBUSA will notify owners, and dealers will inspect the headlamp adjustment, adjusting it as necessary, free of charge. The recall began on January 12, 2018. Owners may contact MBUSA customer service at 1-877-496-3691.
Oct 6, 2017
Mercedes-Benz USA, LLC. (MBUSA) is recalling these vehicles: 2014-2018 CLA250, CLA250 4Matic, CLA45 AMG 4Matic, 2015-2018 GLA250, GLA250 4Matic, GLA45 AMG 4Matic, C300 4Matic, C63S AMG, 2012-2014 C250, C350, C300 4Matic, E550 4Matic, 2013-2014 C63 AMG, 2012-2015 C250 Coupe, C350 Coupe, C63 AMG Coupe, 2013-2015 C350 4Matic Coupe, GLK250 4Matic BlueTec, GLK350, GLK350 4Matic, 2016-2017 C350e, C43 AMG, 2015 C400 4Matic, 2016-2018 C63 AMG, GLC300, GLC300 4Matic, 2017-2018 C300 Coupe, C300 4Matic Coupe, C43 AMG, C63 AMG Coupe, C63S AMG Coupe, C300 Cabriolet, C300 4Matic Cabriolet, C43 AMG Cabriolet, C63 AMG Cabriolet, C63S AMG Cabriolet, GLC300 4Matic Coupe, GLC43 AMG, GLC43 AMG Coupe, 2014 E350 Coupe, E350 4Matic Coupe, E350 Cabriolet, E400 Hybrid, 2015-2017 E400 Coupe, E400 4Matic Coupe, E400 Cabriolet, 2014-2017 E550 Coupe, E550 Cabriolet, B250e, 2014-2016 E250 BlueTec, E63 AMG 4Matic Wagon, 2012-2013 E350 BlueTec, 2012-2016 E350, E350 4Matic, 2015-2016 E400, E400 4Matic, 2012 E63 AMG, 2014-2015 E250 4Matic BlueTec, 2013-2016 E350 Wagon, 2017 GLC300d 4Matic, and 2018 GLC350e 4Matic. The driver's air bag may unexpectedly deploy due to insufficient grounding of the steering components if an electrostatic discharge occurs and the air bag clockspring is broken.
Consequence & remedy
Consequence: If the driver air bag inadvertently deploys, it can increase the risk of injury and a crash.
Remedy: MBUSA will notify owners, and dealers will add sufficient grounding to the steering components, free of charge. The recall began in December 6, 2017. Owners may contact MBUSA customer service at 1-877-496-3691.
Mar 14, 2017
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 AMG GT-S, GLC300, CLA250 and GLE300d 4Matic vehicles, 2013 C250, E350 BlueTec and G63 AMG vehicles, 2008-2014 C300 vehicles, 2013-2014 C300 4Matic and ML350 4Matic vehicles, 2009 C350 vehicles, 2014 CLS550, E350 4Matic, E350 Coupe 4Matic, E350 Wagon 4Matic, GLK350 and SL550 vehicles, 2012 CLS550 4Matic vehicles, 2012-2016 E350 vehicles, 2016-2017 GL450 4Matic vehicles, 2012-2014 ML350 4Matic BlueTec vehicles, 2015 S550, S550 4Matic and C300 4Matic Sedan vehicles, 2015-2016 C300 Sedan vehicles, and 2017 SL63 AMG vehicles. Various control units on these vehicles may have been updated with incorrect software, potentially affecting the correct deployment of the air bags in the event of a crash.
Consequence & remedy
Consequence: If the air bags do not deploy as intended in the event of a crash, there would be an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will update software in the affected control units, free of charge. The recall began April 21, 2017. Owners may contact MBUSA customer service at 1-800-367-6372.
Additional source detail variants (2)
Electrical System:software
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 AMG GT-S, GLC300, CLA250 and GLE300d 4Matic vehicles, 2013 C250, E350 BlueTec and G63 AMG vehicles, 2008-2014 C300 vehicles, 2013-2014 C300 4Matic and ML350 4Matic vehicles, 2009 C350 vehicles, 2014 CLS550, E350 4Matic, E350 Coupe 4Matic, E350 Wagon 4Matic, GLK350 and SL550 vehicles, 2012 CLS550 4Matic vehicles, 2012-2016 E350 vehicles, 2016-2017 GL450 4Matic vehicles, 2012-2014 ML350 4Matic BlueTec vehicles, 2015 S550, S550 4Matic and C300 4Matic Sedan vehicles, 2015-2016 C300 Sedan vehicles, and 2017 SL63 AMG vehicles. Various control units on these vehicles may have been updated with incorrect software, potentially affecting the correct deployment of the air bags in the event of a crash.
Consequence: If the air bags do not deploy as intended in the event of a crash, there would be an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will update software in the affected control units, free of charge. The recall began April 21, 2017. Owners may contact MBUSA customer service at 1-800-367-6372.
Air Bags:frontal:sensor/control MODULE-INACTIVE
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2016 AMG GT-S, GLC300, CLA250 and GLE300d 4Matic vehicles, 2013 C250, E350 BlueTec and G63 AMG vehicles, 2008-2014 C300 vehicles, 2013-2014 C300 4Matic and ML350 4Matic vehicles, 2009 C350 vehicles, 2014 CLS550, E350 4Matic, E350 Coupe 4Matic, E350 Wagon 4Matic, GLK350 and SL550 vehicles, 2012 CLS550 4Matic vehicles, 2012-2016 E350 vehicles, 2016-2017 GL450 4Matic vehicles, 2012-2014 ML350 4Matic BlueTec vehicles, 2015 S550, S550 4Matic and C300 4Matic Sedan vehicles, 2015-2016 C300 Sedan vehicles, and 2017 SL63 AMG vehicles. Various control units on these vehicles may have been updated with incorrect software, potentially affecting the correct deployment of the air bags in the event of a crash.
Consequence: If the air bags do not deploy as intended in the event of a crash, there would be an increased risk of injury in the event of a crash.
Remedy: MBUSA will notify owners, and dealers will update software in the affected control units, free of charge. The recall began April 21, 2017. Owners may contact MBUSA customer service at 1-800-367-6372.
Feb 23, 2017
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2015-2017 C300 4Matic, C300, CLA250, CLA250 4Matic and CLA45 AMG vehicles, 2017 C300 4Matic Cabrio, C300 4Matic Coupe, C300 Cabrio, C300 Coupe, E300, E300 4Matic, E400 4Matic Wagon, E43 AMG 4Matic, GLA250, GLA250 4Matic and GLC300 4Matic Coupe vehicles and 2016 C350e and GLC300 vehicles and 2016-2017 C450 4Matic AMG Sport and GLC300 4Matic vehicles. In the event that the engine or transmission cannot turn over, the starting current limiter may overheat from the repeated attempts of the starter motor attempting to start the vehicle.
Consequence & remedy
Consequence: If the starting current limiter overheats, the surrounding components can melt, increasing the risk of a fire.
Remedy: MBUSA will notify owners, and dealers will install an additional fuse in the electrical line to the starter, free of charge. The recall began August 31, 2017. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2017080002.
Additional source detail variants (2)
Electrical System:starter Assembly
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2015-2017 C300 4Matic, C300, CLA250, CLA250 4Matic and CLA45 AMG vehicles, 2017 C300 4Matic Cabrio, C300 4Matic Coupe, C300 Cabrio, C300 Coupe, E300, E300 4Matic, E400 4Matic Wagon, E43 AMG 4Matic, GLA250, GLA250 4Matic and GLC300 4Matic Coupe vehicles and 2016 C350e and GLC300 vehicles and 2016-2017 C450 4Matic AMG Sport and GLC300 4Matic vehicles. In the event that the engine or transmission cannot turn over, the starting current limiter may overheat from the repeated attempts of the starter motor attempting to start the vehicle.
Consequence: If the starting current limiter overheats, the surrounding components can melt, increasing the risk of a fire.
Remedy: MBUSA will notify owners, and dealers will install an additional fuse in the electrical line to the starter, free of charge. The recall began August 31, 2017. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2017080002.
Engine And Engine Cooling:engine
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2015-2017 C300 4Matic, C300, CLA250, CLA250 4Matic and CLA45 AMG vehicles, 2017 C300 4Matic Cabrio, C300 4Matic Coupe, C300 Cabrio, C300 Coupe, E300, E300 4Matic, E400 4Matic Wagon, E43 AMG 4Matic, GLA250, GLA250 4Matic and GLC300 4Matic Coupe vehicles and 2016 C350e and GLC300 vehicles and 2016-2017 C450 4Matic AMG Sport and GLC300 4Matic vehicles. In the event that the engine or transmission cannot turn over, the starting current limiter may overheat from the repeated attempts of the starter motor attempting to start the vehicle.
Consequence: If the starting current limiter overheats, the surrounding components can melt, increasing the risk of a fire.
Remedy: MBUSA will notify owners, and dealers will install an additional fuse in the electrical line to the starter, free of charge. The recall began August 31, 2017. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2017080002.
Aug 16, 2016
Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2016 GLC 300 SUV, GLC 300 4Matic SUV, C300 Sedan and C300 4Matic vehicles manufactured February 8, 2016, to May 18, 2016. The affected vehicles may be equipped with an Electronic Stability Program (ESP) control unit that may have been damaged before being installed.
Consequence & remedy
Consequence: A damaged ESP control unit may inadvertently activate the stability control altering the vehicle's path. Additionally, the electronic parking brake may not function. Either condition may increase the risk of a crash.
Remedy: MBUSA will notify owners, and dealers will replace the ESP Hydraulic control units, free of charge. The recall is expected to begin in October 2016. Owners may contact MBUSA customer service at 1-800-367-6372.
Mar 10, 2016
Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2016 GLC 300 vehicles manufactured June 16, 2015, to November 3, 2015, and 2016 GLC 300 4Matic vehicles manufactured July 16, 2015, to November 3, 2015. The steering columns in the affected vehicles may have the wiring harness for the switch module incorrectly routed. As a result, the harness may chafe and the air bag may unexpectedly deploy or the engine may stall.
Consequence & remedy
Consequence: An unexpected air bag deployment or engine stall increases the risk of a crash.
Remedy: MBUSA will notify owners, and dealers will inspect the wiring harnesses, properly rerouting them as necessary. Any damaged harnesses will be replaced. These repairs will be performed free of charge. The recall began on April 22, 2016. Owners may contact MBUSA customer service at 1-800-367-6372.
Additional source detail variants (2)
Electrical System:wiring
Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2016 GLC 300 vehicles manufactured June 16, 2015, to November 3, 2015, and 2016 GLC 300 4Matic vehicles manufactured July 16, 2015, to November 3, 2015. The steering columns in the affected vehicles may have the wiring harness for the switch module incorrectly routed. As a result, the harness may chafe and the air bag may unexpectedly deploy or the engine may stall.
Consequence: An unexpected air bag deployment or engine stall increases the risk of a crash.
Remedy: MBUSA will notify owners, and dealers will inspect the wiring harnesses, properly rerouting them as necessary. Any damaged harnesses will be replaced. These repairs will be performed free of charge. The recall began on April 22, 2016. Owners may contact MBUSA customer service at 1-800-367-6372.
Steering:column
Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2016 GLC 300 vehicles manufactured June 16, 2015, to November 3, 2015, and 2016 GLC 300 4Matic vehicles manufactured July 16, 2015, to November 3, 2015. The steering columns in the affected vehicles may have the wiring harness for the switch module incorrectly routed. As a result, the harness may chafe and the air bag may unexpectedly deploy or the engine may stall.
Consequence: An unexpected air bag deployment or engine stall increases the risk of a crash.
Remedy: MBUSA will notify owners, and dealers will inspect the wiring harnesses, properly rerouting them as necessary. Any damaged harnesses will be replaced. These repairs will be performed free of charge. The recall began on April 22, 2016. Owners may contact MBUSA customer service at 1-800-367-6372.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
2EA21002 · Desiccated Air Bag Inflator Rupture
Opened Sep 17, 2021 · No close date supplied
Status: open (inferred from source dates) · Air Bags:frontal:driver Side:inflator Module; Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Additional source detail variants (2)
Air Bags:frontal:driver Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Air Bags:frontal:passenger Side:inflator Module
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
PE21001 · Front Roof Panel Detachment
Opened Jan 8, 2021 · Closed Oct 14, 2021
Status: closed (inferred from source dates) · Structure:body:roof And Pillars
On January 8, 2021, after ongoing review with Mercedes Benz, the National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation (ODI) opened PE21-001 to assess allegations of front roof panel detachments while driving at highway speeds in certain 2015 Mercedes-Benz (Mercedes) C-Class vehicles.The subject front roof panel is a stationary panel composed of polycarbonate and is attached to the vehicle via adhesive at the time of manufacture. The panel is found on subject vehicles equipped with panoramic sunroofs. Over time, the subject panels may exhibit cosmetic degradation leading to replacement of the panel, a procedure which entails: removal of the old panel and adhesive, site preparation, and installation of a replacement panel with new adhesive.The consumer complaints that prompted the opening of PE21-001 all described detachments of front roof panels that had been replaced after the vehicle was put into service.Mercedes' internal investigation identified a broader scope of affected vehicles (2014-2020 CLA, GLA, C, S, GLC, and GLE class) and found the following potential service procedure- related causes of front roof panel detachments:- Improper surface pretreatments such as the use of the wrong primer or cleaner or scoring of the surface; or - Use of the incorrect adhesive.These conditions lead to a front roof panel bond that, even if sound at the time of repair, cannot maintain its strength over time and environmental exposure.Mercedes updated its service and parts ordering systems to reinforce the proper use of specified kits and procedures via webinars, shop foreman meetings, and explicit reference to the risks incurred by diverging from the repair procedures. Mercedes is also furnishing parts ordering assistance, and will hold dealerships accountable for improper repairs.ODI's analysis of the ten complaints it has received from the public (VOQ's) and MBUSA's complaint data submitted in response to the information request letter for PE21-001 identified a total of 57 non-duplicative reports alleging incidents in which the front roof panel detached from the vehicle while in motion. Included within the 57 reports are incidents where consumers state the panel detached ...and flew off into traffic.On March 19, 2021, Mercedes notified NHTSA that it would recall subject vehicles with front roof panels known to have been replaced after the original sale of the vehicle. In total, the recall (designated as Recall 21V197) covers 15,099 vehicles that were ever registered in the United States. Based on Recall 21V197 and the remedy implemented by Mercedes, further investigation does not appear to be warranted at this time.Accordingly, this investigation is closed.The ODI complaints cited above can be viewed at www.nhtsa.gov under the following ODI identification numbers: 11376425, 11352686, 11351629, 11349158, 11341541, 11337594, 11324100, 11311591, 11222127, 11404183
Illustration