← New search

2005 MERCEDES-BENZ E350

Owner reports · Recalls · Investigations

Limited comparison data

There is not enough comparable history to draw a useful model-year comparison.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all E350 years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 13 of 15 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Fuel System, Gasoline. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Service Brakes. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Electrical System. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

2 crash reports0 fire reports0 injury reports

Service Brakes, Hydraulic complaints

2 reports
Clear category filter
57,824 miles · Jul 9, 2010
Service Brakes, Hydraulic

MERCEDES BENZ E350 (2005). THE BRAKE SYSTEM WAS ALWAYS MALFUNCTION, IT HAS HAPPENED 4 TIMES IN A WEEK, MY CAR WAS TOOK LONGER DISTANCE TO COMPLETED STOP, AND ALSO DISPLAY A MESSAGE OF ' REDUCED BRAKING POWER DEPRESS BRAKE PEDAL FULLY'. SO THAT I TOOK MY CAR TO MERCEDES BENZ DEALER TO CHECK, THE SERVICE ADVISOR GAVE ME THE AN…

Read full complaint

MERCEDES BENZ E350 (2005). THE BRAKE SYSTEM WAS ALWAYS MALFUNCTION, IT HAS HAPPENED 4 TIMES IN A WEEK, MY CAR WAS TOOK LONGER DISTANCE TO COMPLETED STOP, AND ALSO DISPLAY A MESSAGE OF ' REDUCED BRAKING POWER DEPRESS BRAKE PEDAL FULLY'. SO THAT I TOOK MY CAR TO MERCEDES BENZ DEALER TO CHECK, THE SERVICE ADVISOR GAVE ME THE ANSWER WAS NEED TO REPLACE THE PART NUMBER OF 005-431-81-12, AFTER THAT I WENT HOME AND CHECK ON INTERNET AND FOUND OUT THAT MERCEDES BENZ HAVE A RECALL (RECALL NUMBER 2004050014 & 2005070007) FOR THIS KIND OF BRAKE ISSUES, AND THEN I TOOK MY CAR BACK TO THE DEALER FOR CHECKING ONE MORE TIME, NOW THEY ARE GIVING ME ANOTHER STORY, THEY SAID NOTHING WRONG WITH THE PART LISTED ABOVE, BUT STILL NEED TO REPLACE ANOTHER PART (PART NUMBER IS 000-430-0712). ACCORDING TO THE OPERATOR'S MANUAL, E-GLASS SEDAN, USA EDITION B2006, PAGE 400, IT HAS MENTIONED THAT WHEN THE MESSAGE DISPLAY ON SCREEN OF REDUCED BRAKING POWER DEPRESS BRAKE PEDAL FULLY', THAT MEANS IS THE ELECTROHYDRAULIC BRAKE SYSTEM IS IN EMERGENCY OPERATION MODE. CONSIDERABLY GREATER BRAKE PEDAL FORCE IS REQUIRED AND THE STOPPING DISTANCE IS INCREASED. I DEEPLY BELIEVE THAT THE BRAKE PROBLEM MUST RELATED TO THOSE TWO RECALL. BUT THE MERCEDES BENZ WAS REFUSED TO REPAIR AS NO COST. PLEASE ADVISE ME THAT WHAT SHOULD I DO, SHALL I BRING MY CAR TO OUR MERCEDES BENZ DEALER. *TR

NHTSA ODI #10342127

35,800 miles · Mar 6, 2008
Service Brakes, HydraulicCrash

2005 MERCEDES 350 CDI - BRAKE FAILURE! IN FACT, CAR ACCELERATED WITH PRESSING BRAKE PEDAL DOWN. BRAKE PROBLEMS ON THIS MODEL HAVE BEEN SUBJECT OF PREVIOUS NHTSA RECALL ADVISORY (PLEASE SEE HTTP://WWW.MOTORTREND.COM/CARS/2005/MERCEDES_BENZ/E_CLASS/E320_CDI_SEDAN/616/RECALLS/). THIS CAR SERVICED WAS REGULARLY AT MERCEDES DEALER…

Read full complaint

2005 MERCEDES 350 CDI - BRAKE FAILURE! IN FACT, CAR ACCELERATED WITH PRESSING BRAKE PEDAL DOWN. BRAKE PROBLEMS ON THIS MODEL HAVE BEEN SUBJECT OF PREVIOUS NHTSA RECALL ADVISORY (PLEASE SEE HTTP://WWW.MOTORTREND.COM/CARS/2005/MERCEDES_BENZ/E_CLASS/E320_CDI_SEDAN/616/RECALLS/). THIS CAR SERVICED WAS REGULARLY AT MERCEDES DEALERSHIP - BEFORE AND AFTER INCIDENTS. THERE IS NO DOCUMENTATION OF FIXING THIS PROBLEM BEFORE OR AFTER RECENT EVENT WHICH LED TO AN MVC. CORPORATE MERCEDES HAS BEEN RUDE AND RECOMMENDED WE TAKE THIS MATTER TO COURT IF WE WISH THE CAR PROPERLY SERVICED. REPRESENTATIVE 'JITEN' REFUSED TO GIVE HIS LAST NAME AND REFUSED TO GIVE A COMPLAINT NUMBER. COULD THIS CAR BE UNSAFE? MERCEDES IS NOT BEING HELPFUL AT ALL. WHAT TO DO? PLEASE HELP. *TR

NHTSA ODI #10220333

Official recalls

0

No recalls in this snapshot.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

PE10017 · Driver Air Bag Circuit High Resistance

Opened May 14, 2010 · Closed Nov 24, 2010

Status: closed (inferred from source dates) · Air Bags; Air Bags:frontal; Electrical System; Electrical System:wiring; Electrical System:wiring:interior/under Dash

Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.

Additional source detail variants (5)

Air Bags:frontal

Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.

Air Bags

Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.

Electrical System

Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.

Electrical System:wiring:interior/under Dash

Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.

Electrical System:wiring

Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.