← New search

2005 MERCEDES-BENZ E350

Owner reports · Recalls · Investigations

Limited comparison data

There is not enough comparable history to draw a useful model-year comparison.

About this comparison →

How this year compares

Owner complaints by model year

Other model years Selected year
Compare all E350 years →

Counts vary with age, sales and reporting. They are not failure rates.

What owners reported most

All reported categories

Tap a category to read its complaints. One report may name several components.

When problems were reported

Mileage at the reported incident

Limited mileage data: 13 of 15 reports include usable mileage. There isn’t enough coverage to show a useful chart.

NHTSA’s mileage field refers to the reported incident, not necessarily the filing date. This shows report counts, not the likelihood of a failure.

What to inspect

Issues worth paying extra attention to based on owner reports.

  • Fuel System, Gasoline. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Service Brakes. Review the 3 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →
  • Electrical System. Review the 2 owner reports in this category and discuss these concerns during a pre-purchase inspection. Read reports →

NHTSA owner reports · September 18, 2026 snapshot.

2 crash reports0 fire reports0 injury reports

Service Brakes complaints

3 reports
Clear category filter
260,000 miles · Feb 6, 2021
Service BrakesCrash

HI, I WAS DRIVING NORMALY ON A ROAD, NO WARNING, JUST BRAKE LIGHT POPS UP TO REDUCE POWER. PEDAL WAS EMPTY AND STEERING GOT HARD NO UPSHIFT. I HIT A CURB AND CRACKED MY BUMPER. ALL BRAKES ARE NEW. WHEN I LOOKED ON LINE, I SAW SOME PEOPLE DEVELOPED A DEVICE THAT RESETS THE ABS MUDUAL TO 100%. THEY SAID MERCEDES PUT A TIMER IN THE…

Read full complaint

HI, I WAS DRIVING NORMALY ON A ROAD, NO WARNING, JUST BRAKE LIGHT POPS UP TO REDUCE POWER. PEDAL WAS EMPTY AND STEERING GOT HARD NO UPSHIFT. I HIT A CURB AND CRACKED MY BUMPER. ALL BRAKES ARE NEW. WHEN I LOOKED ON LINE, I SAW SOME PEOPLE DEVELOPED A DEVICE THAT RESETS THE ABS MUDUAL TO 100%. THEY SAID MERCEDES PUT A TIMER IN THE SYSTEM THAT RUNS OUT AND MAKE YOU CHANGE STUFF? THIS DEVICE I JUST BOUGHT TO USE SO I CAN USE MY CAR. I'M AN AUTOMOTIVE TECHNICIAN AND THIS SCRAED THE HELL OUT OF ME ON A DARK NIGHT IN OHIO. I ENED UP TOWING MY CAR TO MY HOUSE 60 MILES AWAY. VERY ANGERY WITH MB.

NHTSA ODI #11394931

85,000 miles · May 27, 2020
Service Brakes

BRAKE DASH WARNING LIGHT COMES ON INTERMITTENTLY. I HAVE HAD BRAKES CHECKED, NOT A PROBLEM WITH PADS OR SENSORS. THE BRAKE DASH INDICATOR WILL ILLUMINATE FOR SEVERAL DAYS, THEN GO OUT AND NOT COME ON AGAIN FOR SEVERAL DAYS OR WEEKS. *TR

NHTSA ODI #11326224

130,000 miles · Oct 11, 2018
Service Brakes

TL* THE CONTACT OWNS A 2005 MERCEDES-BENZ E250. WHILE DRIVING 50 MPH, THE BRAKES FAILED TO OPERATE WHEN THE BRAKE PEDAL WAS DEPRESSED. THE VEHICLE COASTED UNTIL IT CAME TO A COMPLETE STOP. THE CONTACT TURNED OFF AND RESTARTED THE VEHICLE, AND AN UNKNOWN WARNING INDICATOR ILLUMINATED. THE VEHICLE WAS TAKEN TO CARLTON MOTORCARS IN…

Read full complaint

TL* THE CONTACT OWNS A 2005 MERCEDES-BENZ E250. WHILE DRIVING 50 MPH, THE BRAKES FAILED TO OPERATE WHEN THE BRAKE PEDAL WAS DEPRESSED. THE VEHICLE COASTED UNTIL IT CAME TO A COMPLETE STOP. THE CONTACT TURNED OFF AND RESTARTED THE VEHICLE, AND AN UNKNOWN WARNING INDICATOR ILLUMINATED. THE VEHICLE WAS TAKEN TO CARLTON MOTORCARS INC. (2446 LAURENS RD, GREENVILLE, SC 29607, (864) 213-8000) WHERE IT WAS DIAGNOSED THAT THE SENSOTRONIC BRAKE CONTROL SYSTEM NEEDED TO BE REPROGRAMMED, WHICH WAS NOT THE ORIGINAL MERCEDES-BENZ PART. THE VEHICLE WAS NOT REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS 130,000.

NHTSA ODI #11139670

Official recalls

0

No recalls in this snapshot.

Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗

NHTSA investigations

1

PE10017 · Driver Air Bag Circuit High Resistance

Opened May 14, 2010 · Closed Nov 24, 2010

Status: closed (inferred from source dates) · Air Bags; Air Bags:frontal; Electrical System; Electrical System:wiring; Electrical System:wiring:interior/under Dash

Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.

Additional source detail variants (5)

Air Bags:frontal

Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.

Air Bags

Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.

Electrical System

Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.

Electrical System:wiring:interior/under Dash

Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.

Electrical System:wiring

Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.