NHTSA owner reports · September 18, 2026 snapshot.
Official recalls
15Aug 21, 2019
Mack Trucks, Inc. (Mack) is recalling certain 2015 Pinnacle (CXU) vehicles equipped with Meritor FF967 Non Drive Front Steer Axles. The axles missed the heat treating operation during manufacturing, reducing their strength and possibly causing the axle beams to fracture.
Consequence & remedy
Consequence: Fracture of the axle beam can cause a loss of vehicle control, increasing the risk of a crash.
Remedy: Mack will notify owners, and dealers will inspect and replace the axles as necessary, free of charge. The recall began September 27, 2019. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0419.
Dec 23, 2016
Mack Trucks, Inc. (Mack) is recalling certain model year 2012, 2014-2015 and 2017 Granite (GU), 2012-2017 Pinnacle (CHU, CXU), and 2013-2015 and 2017 Titan (TD) trucks manufactured January 7, 2011, to September 29, 2016. The affected vehicles were built with front wheel hubs that cannot support the gross axle weight rating of the front axle.
Consequence & remedy
Consequence: Overloaded front wheel hubs can result in premature failure of the hubs, bearings, and the related components, which can cause the front hub assembly to separate from the front axle. Because of this, the driver may lose control of the vehicle or parts may be dropped on the road, increasing the risk of a crash.
Remedy: Mack will notify owners, and dealers will replace the hub assemblies, free of charge. The recall began on February 16, 2017. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0406.
Feb 19, 2016
Mack Trucks, Inc. (Mack) is recalling certain model year 2012-2016 Granite (GU), Pinnacle (CHU, CXU), TerraPro (LEU, MRU), Titan (TD), and LR trucks manufactured from September 1, 2011, through September 8, 2015. The cap nut that retains the interaxle driveshaft yoke to the rear axle input shaft may loosen.
Consequence & remedy
Consequence: If he cap nut loosens and falls off, the yoke can separate from the axle input shaft and allow the drive shaft to disconnect, increasing the risk of a crash.
Remedy: Mack will notify owners, and dealers will replace the cap nut. The input shaft threads will be inspected for damage. Any damaged input shaft will be replaced. These repairs will be performed free of charge. An interim notice was sent to owners on April 25, 2016. The recall began on June 7, 2016. Owners may contact Mack customer service at 1-610-709-2131. Mack's recall campaign number for this recall is SC0399.
Aug 17, 2015
Mack Trucks, Inc. (Mack) is recalling certain model year 2013-2015 Pinnacle (CXU) trucks manufactured from October 3, 2012, through February 18, 2014 and equipped with Meritor air disc brakes. In the affected vehicles, the brake chambers may have been incorrectly mounted resulting in internal contamination of the air brake calipers.
Consequence & remedy
Consequence: Contamination of the calipers may cause a loss of brakes on one wheel, lengthening the distance required to stop the vehicle, increasing the risk of a crash.
Remedy: Mack will notify owners, and dealers will inspect the disc brake caliper and brake chamber to determine if the washers are located in the correct position. If the washers are in the correct position, no further action is required. If the washers are not located in the correct position, replacement of the disc brake caliper and brake chamber will be performed and the addition of two washers per brake assembly will be installed, free of charge. The recall began on September 30, 2015. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0392.
Mar 11, 2015
Mack Trucks, Inc (Mack) is recalling certain model year 2012-2015 CXU trucks manufactured February 4, 2011, to December 23, 2014, and equipped with an air release fifth wheel latch. The affected vehicles have a switch to release the fifth wheel latch that may invertently be pushed and cause the trailer to unintentionally disconnect from the tractor after the parking brake has been released.
Consequence & remedy
Consequence: An inadvertent decoupling of the trailer from the tractor may increase the risk of a crash.
Remedy: Mack will notify owners, and dealers will install a secondary action that operators will need to activate before the fifth wheel will release, free of charge. The recall began on May 6, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0390.
Feb 3, 2015
Mack Trucks, Inc. (Mack) is recalling certain model year 2014-2015 CXU trucks manufactured June 1, 2013, to November 28, 2014. These trucks may be equipped with an 88 liter air reservoir for the brakes instead of a 96 liter air reservoir. The lower volume of air may result in increased distances being needed to stop the truck. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 121, "Air Brake Systems."
Consequence & remedy
Consequence: If the truck unexpectedly requires extra distance to stop, there is an increased risk of a crash.
Remedy: Mack will notify owners, and dealers will install a larger air brake reservoir tank, free of charge. The recall began April 1, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0389.
Jan 22, 2015
Mack Trucks, Inc. (Mack) is recalling certain model year 2015 and 2016 CXU and LEU trucks manufactured May 20, 2014, to March 24, 2015, equipped with certain Haldex Life Seal Type 30/30 Long Stroke Air Brake Actuators manufactured from January 9, 2014, through February 3, 2015. The affected actuators may have an incomplete attachment of the internal rubber diaphragm to the actuation mechanism of the parking brake section of the Life Seal actuator.
Consequence & remedy
Consequence: If the diaphragm is not completely attached, there may be internal leakage from the service section past the diaphragm, potentially trapping air pressure in the parking brake section. This air pressure in turn, if not vented, may prevent full release of the actuator unit, and may induce brake drag and may result in overheated wheelend service brakes, increasing the risk of a fire.
Remedy: Mack will notify owners, and dealers will inspect the brake actuator and replace, as necessary, free of charge. The recall began March 20, 2015. Owners may contact Mack customer service at 1-610-709-2131. Mack's number for this recall is SC0387.
Nov 20, 2014
Mack Trucks, Inc. (Mack) is recalling certain model year 2015 CXU and GU trucks manufactured January 1, 2014, to August 20, 2014. The affected vehicles contain an incorrectly wired Automatic Shut-down Protection System, which may not operate as expected.
Consequence & remedy
Consequence: If the Automatic Shut-down Protection System does not operate as expected, the operator may be unable to control the increase in the engines rpms, increasing the risk of engine failure and vehicle fire.
Remedy: Mack will notify owners, and dealers will inspect the system for correct operation and repair if necessary, free of charge. The recall began on January 16, 2015. Owners may contact Mack customer service at 1-610-709-2131. Mack's number for this recall is SC0386.
Nov 18, 2014
Mack Trucks, Inc. (Mack) is recalling certain model year 2015 CHU and CXU trucks manufactured from March 31, 2014, through June 26, 2014. In the affected vehicles, the collars that prevent the ball sockets from backing out of the tie rod may have been incorrectly positioned. This may allow the ball sockets to come loose.
Consequence & remedy
Consequence: If the ball sockets come loose from the tie rod, a complete loss of steering may result, increasing the risk of a crash.
Remedy: Mack will notify owners, and dealers will inspect and re-position the collar if necessary, free of charge. The recall began on January 20, 2015. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0385.
Sep 11, 2014
Mack Trucks, Inc. (Mack) is recalling certain 2015 CHU, CXU, and GU trucks manufactured June 4, 2014, through June 18, 2014. In the affected vehicles, the bolts that attach the seat belt to the seat frame may not have been torqued to the required specification. This could cause the bolts to loosen over time, allowing the seat belt to detach.
Consequence & remedy
Consequence: If the seat belt detaches from its mounts, the seat belt would fail to properly restrain to the seat occupant, increasing the risk of injury in the the event of a crash.
Remedy: Mack will notify owners, and dealers will tighten the bolts to the required specification, free of charge. The recall began in October 2014. Owners may contact Mack customer service at 1-800-528-6586. Mack's number for this recall is SC0383.
Sep 9, 2014
Mack Trucks, Inc. (Mack) is recalling certain model year 2013-2015 CXU and 2014-2015 CHU trucks manufactured August 23, 2012, through June 27, 2014, and equipped with adaptive cruise control. Due to a software error, the affected vehicles may not provide visual or audible alerts to the driver warning them that an obstruction in the road was detected.
Consequence & remedy
Consequence: If the driver is not warned of something being in the truck's path, there is an increased risk of a crash.
Remedy: Mack will notify owners, and dealers will reprogram the vehicle control unit, free of charge. The recall began on September 30, 2014. Owners may contact Mack customer service at 1-800-866-1177. Mack's number for this recall is SC0381.
Apr 18, 2014
Mack Trucks Inc. (Mack) is recalling certain model year 2010-2015 CXU trucks manufactured November 20, 2009, through January 27, 2014, and equipped with dual vertical exhaust pipes. The white conspicuity reflectors on the rear of the cab could be blocked by the exhaust pipes. As such, these vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment."
Consequence & remedy
Consequence: A blocked reflector makes the truck-tractor less visible when operating the vehicle without a trailer in the dark, increasing the risk of a crash.
Remedy: Mack will notify owners, and dealers will inspect the trucks and if the reflectors are blocked, they will add two vertical white reflectors to the rear glass , free of charge. The recall began on May 30, 2014. Owners may contact Mack Customer Service at 1-336-393-2000. Mack's number for this recall is SC0378.
Apr 18, 2014
Mack Trucks Inc. (Mack) is recalling certain model year 2014-2015 CXU trucks manufactured February 1, 2013, through January 27, 2014, and equipped with a vertical wet tank (aka supply air tank) for the brake system. The pressure relief valve may not have been installed in the tank during manufacturing.
Consequence & remedy
Consequence: Without a pressure relief valve, the air tank could rupture from being overpressurized increasing the risk of injury.
Remedy: Mack will notify owners, and dealers will install a pressure relief valve in the air tank, free of charge. The recall began on June 11, 2014. Owners may contact Mack customer service at 1-866-298-6586. Mack's number for this recall is SC0380.
Mar 24, 2014
Mack Trucks Inc. (Mack) is recalling certain model year 2014-2015 CXU, 2010-2015 LEU, and 2011-2015 MRU vehicles manufactured with certain Cummins Westport Model ISL G and ISX12 G engines. Condensation in the intake manifold may freeze during cold weather conditions and interfere with the proper operation of the intake manifold pressure sensor.
Consequence & remedy
Consequence: The improper operation of the sensor could induce elevated exhaust temperatures or flames from the exhaust pipe, increasing the risk of a vehicle fire or burn injury to a person near the exhaust pipe.
Remedy: Cummins and Cummins Westport will notify owners, and authorized Cummins service facilities will upload a new ECM calibration, free of charge. The recall began on March 12, 2014. Customers may contact Mack at 1-336-393-2000 or Cummins Inc. at 1-800-343-7357. Mack's number for this recall is SC0377.
Feb 21, 2014
Mack Trucks, Inc. (Mack) notified the agency on February 20, 2014, that they are recalling certain model year 2010-2012 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. While continuing to research the scope of the issue, Mack expanded the recall on November 18, 2014 to include certain model year 2008-2009 and 2013-2014 CHU, CXU, GU and TD vehicles manufactured from June 16, 2009, through July 8, 2011. Having completed its investigation, Mack once again expanded the recall during February 2015 to include an additional 53,780 vehicles from model years 2007 and 2015. The recall now covers model year 2007-2015 includes CHU, CXU, GU and TD vehicles produced October 13, 2006, through October 3, 2014. In the affected vehicles, the Electronic Power Distribution Module (EPDM) may be contaminated from water leaks in, and around, the windshield. If exposed to water leaks, contaminants such as road salts may deposit on the EPDM.
Consequence & remedy
Consequence: Deposits of contaminants may result in the circuits being bridged, creating a high resistance short, increasing the risk of a fire.
Remedy: Mack has notified owners, and dealers will inspect the EPDM. If contamination has occurred, dealers will replace the EPDM and address the leak, free of charge. Owners of model year 2010-2012 CHU, CXU, GU and TD vehicles were initially notified April 24, 2014. Owners affected by the recall expansions were notified in February 2015. Owners may contact Mack Trucks at 1-336-393-2000. Mack's number for this recall is SC0375.
Model-level recall history does not show whether a particular VIN is affected or has received a repair. Check a VIN with NHTSA ↗
NHTSA investigations
1PE20005 · Mdrive Transmission Failure To Disengage
Opened Apr 28, 2020 · Closed Apr 4, 2022
Status: closed (inferred from source dates) · Power Train:manual Transmission
On April 28, 2020, the Office of Defects Investigation (ODI) opened PE20-005 to investigate reports of 2013-2015 Mack CHU and CXU trucks equipped with mDrive transmissions continuing to push forward when stopping, possibly increasing the risk of a crash. After more field reports were discovered, the scope of the investigation was expanded to cover MY 2013-2016 vehicles. The mDrive transmission is Mack's version of Volvo's I-Shift transmission, an automated manual transmission that allows gear shifting without the use of a clutch pedal. Early I-Shift transmissions were recalled (13V-268) to address a missing redundant clutch disengagement switch that could prevent the clutch from automatically disengaging when the brake was applied. If a loss of signal from the brake air pressure switch occurred, the clutch would remain engaged while braking.Although Mack's mDrive transmission adopted the latest Volvo I-Shift design and was built with the redundant clutch switch, ODI received field reports alleging that the mDrive transmission would not disengage when coming to a stop like the Volvo I-Shift transmissions in recall 13V-268.After more than a year of information requests, data exchanges and grouping, and analyzing data, ODI was able to correlate two versions of transmission software (ID 23084009 and ID 23084004), with two frequently replaced parts ('solenoid valve' and 'cylinder assy clutch') as outliers. However, Mack dismissed the replacement parts as being normal service parts for worn clutch systems.According to Mack, unlike the I-Shift recall, loss of one or more of the switches would not keep the clutch engaged but might cause a delay in the clutch disengaging, possibly due to the software/control system settings, the worn parts and system reaction time.To demonstrate the possible switch failure outcomes, Mack outfitted a subject model truck with a panel that could disable each switch on command. During test drives at the Mack facility, the demonstrator truck stopped when the brake was applied each time, and the truck did not stall when the brake was applied, even when the clutch was engaged. Even though failure of one of the switches could delay clutch disengagement, the stopping distance would still be shorter than one of the recalled Volvo I-Shift transmission trucks. With this information, as well as a lack of known crash incidents related to this complaint, ODI concludes that the Mack vehicles do not present an unreasonable risk to motor vehicle safety. Although ODI is closing this PE, Mack/Volvo should continue improving the transmission control unit software to further refine the clutch disengagement strategy. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. Claims are still being submitted and the Agency will continue to monitor the issue and reserves the right to take further action if warranted by new circumstances.
Illustration